Search found 446 matches

by w9mdb
Wed Jan 31, 2024 5:04 pm
Forum: Thetis
Topic: 700DLE/Thetis ext 10 Mhz sorce( AND) correction factor?
Replies: 12
Views: 1924

Re: 700DLE/Thetis ext 10 Mhz sorce( AND) correction factor?

So what's different about 2.2.2b?
by w9mdb
Wed Jan 17, 2024 2:32 pm
Forum: Thetis
Topic: Suddenly slow to power-on and 'apparent' RFI
Replies: 8
Views: 1369

Re: Suddenly slow to power-on and 'apparent' RFI

So no noise with antenna disconnected?

In that case time to suspect a power supply somewhere -- you have 8KHz intervals going on which sounds like a switching frequency.

You should be able to find it with an AM radio tuned off-station.

Maybe a solar invertor recently installed in the neighborhood?
by w9mdb
Wed Jan 17, 2024 5:10 am
Forum: Thetis
Topic: Suddenly slow to power-on and 'apparent' RFI
Replies: 8
Views: 1369

Re: Suddenly slow to power-on and 'apparent' RFI

Is that with the antenna disconnected?
by w9mdb
Tue Jan 16, 2024 12:51 pm
Forum: Thetis
Topic: Suddenly slow to power-on and 'apparent' RFI
Replies: 8
Views: 1369

Re: Suddenly slow to power-on and 'apparent' RFI

If you select a different empty Rx antenna port is it still there? That will tell you if it's in the rig or in the antenna. And what does the wideband display look like? Unplug MIC 8KHz interference is not real common but others have seen it from different equipment. https://gearspace.com/board/so-m...
by w9mdb
Mon Jan 01, 2024 5:36 pm
Forum: Network Connections & Network Hardware
Topic: CAT over TCP/IP rocks! And so does Hamlib!
Replies: 11
Views: 6782

Re: CAT over TCP/IP rocks! And so does Hamlib!

That's true -- just another way to do it.
by w9mdb
Mon Jan 01, 2024 1:56 pm
Forum: Network Connections & Network Hardware
Topic: CAT over TCP/IP rocks! And so does Hamlib!
Replies: 11
Views: 6782

Re: CAT over TCP/IP rocks! And so does Hamlib!

As a follow up WinLink Express should work with rigctlcom. On the latest Hamlib we also have a new Thetis entry model 2054 -- older hamlibs will have to use 2048 (Flex/PowerSDR) So this command will establish at TS-2000 emulator on COM10 that most any app (other than HRD) can use to talk to Thetis o...
by w9mdb
Sat Dec 30, 2023 8:34 pm
Forum: Thetis
Topic: CAT problem
Replies: 23
Views: 2332

Re: CAT problem

For WSJT-X and JTDX you can also use the TCP/IP port.

Just put this in the COM port area

192.168.1.1:13013

Or whatever IP:Port you have set up.
by w9mdb
Sat Dec 30, 2023 5:41 pm
Forum: Thetis
Topic: CAT problem
Replies: 23
Views: 2332

Re: CAT problem

Also in the latest Hamlib you'll now find a "Thetis" entry by itself.
Future improvements to Thetis will be in there and may deprecate the old entry eventually.

https://n0nb.users.sourceforge.net/

Mike W9MDB
by w9mdb
Sat Dec 30, 2023 5:30 pm
Forum: Thetis
Topic: CAT problem
Replies: 23
Views: 2332

Re: CAT problem

Never thought about use TCP on VSPE....cool beans...

Mike W9MDB
by w9mdb
Sat Dec 30, 2023 4:34 pm
Forum: Thetis
Topic: CAT problem
Replies: 23
Views: 2332

Re: CAT problem

Not sure I can make the directions much clearer -- maybe I can create a youtube video.
It does require a cmd prompt or a batch file to start rigctlcom.

Mike
by w9mdb
Sat Dec 30, 2023 1:30 pm
Forum: Thetis
Topic: CAT problem
Replies: 23
Views: 2332

Re: CAT problem

You can use rigctlcom in Hamlib to connect to another VSPE port and Thetis. It was specifically designed to allow non-Hamlib programs to talk to other rigs. Hamlib support virtually all rigs in existence (I only have 1 request for a new Rhode&Schwartz rig outstanding). rigctlcom is a TS-2000 emu...
by w9mdb
Fri Dec 22, 2023 6:48 pm
Forum: Digital Mode, Rig Control & Logging Software
Topic: No cat control with WSJTX, Thetis and 7000DLE mk11
Replies: 17
Views: 4851

Re: No cat control with WSJTX, Thetis and 7000DLE mk11

It will be in tonight's build

Screenshot 2023-12-22 124815.png
Screenshot 2023-12-22 124815.png (5.41 KiB) Viewed 2733 times
by w9mdb
Fri Dec 22, 2023 2:29 pm
Forum: Digital Mode, Rig Control & Logging Software
Topic: No cat control with WSJTX, Thetis and 7000DLE mk11
Replies: 17
Views: 4851

Re: No cat control with WSJTX, Thetis and 7000DLE mk11

It would show up like this
Screenshot 2023-12-22 082821.png
Screenshot 2023-12-22 082821.png (5.59 KiB) Viewed 2763 times
by w9mdb
Fri Dec 22, 2023 2:17 pm
Forum: Digital Mode, Rig Control & Logging Software
Topic: No cat control with WSJTX, Thetis and 7000DLE mk11
Replies: 17
Views: 4851

Re: No cat control with WSJTX, Thetis and 7000DLE mk11

Any opinion on what I should use for the Manufacturer name?
Apache? It's not really them....at least I don't think Ritchie is working for them, is he?
I can't seem to think of anything better....but since only Apache is supported makes sense I think.
by w9mdb
Fri Dec 22, 2023 1:24 pm
Forum: Digital Mode, Rig Control & Logging Software
Topic: No cat control with WSJTX, Thetis and 7000DLE mk11
Replies: 17
Views: 4851

Re: No cat control with WSJTX, Thetis and 7000DLE mk11

Actually a bit better if you choose PowerSDR instead of TS-2000.
I think I'll add Thetis as another choice.
by w9mdb
Wed Dec 20, 2023 4:41 pm
Forum: Thetis
Topic: Thetis not transmitting with WSJT-x
Replies: 12
Views: 1581

Re: Thetis not transmitting with WSJT-x

In File/Settings/Advanced make sure you do NOT have Tone Spacing X2 or X4 checked.
by w9mdb
Wed Dec 20, 2023 2:15 pm
Forum: Thetis
Topic: Thetis not transmitting with WSJT-x
Replies: 12
Views: 1581

Re: Thetis not transmitting with WSJT-x

What's your callsign? We can check other source for your transmissions.

Have you checked your time at http://time.is?

Mike W9MDB
by w9mdb
Sat Dec 16, 2023 12:59 pm
Forum: Thetis
Topic: Thetis v2.10.3.5 final release
Replies: 97
Views: 153348

Re: Thetis v2.10.3.5 Pre-Release

It may matter how the monitors are setup assuming there are at least two monitors (which I suspect there is). Mine are "extended" with the #1 screen top and #2 on the bottom and I can't duplicate this problem. But if you put #1 on the bottom and #2 on the top the offset numbers are negativ...
by w9mdb
Thu Dec 14, 2023 11:21 pm
Forum: Thetis
Topic: Thetis v2.10.3.5 final release
Replies: 97
Views: 153348

Re: Thetis v2.10.3.5 Pre-Release

Seems to me the problem might be that you really don't know if the PTT worked. If the PTT was never sent that would fix that problem though you'd still want some sort of warning...otherwise people are wondering why PTT doesn't work. A temporary popup of "Frequency X.XXMHz is out of band -- PTT ...
by w9mdb
Sat Dec 09, 2023 3:19 pm
Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
Topic: Difficulty calibrating the power meter on ANAN 100D..
Replies: 2
Views: 4873

Re: Difficulty calibrating the power meter on ANAN 100D..

I don't think your supposed to do more than 50W on 6M.
Others have recommended that limit for FT8 too. I will admit I was using 100W for a while on my 100D -- probably more of a problem with JT9 than FT8.
by w9mdb
Fri Dec 08, 2023 5:50 pm
Forum: Thetis
Topic: Thetis v2.10.3.5 final release
Replies: 97
Views: 153348

Re: Thetis v2.10.3.5 Pre-Release

Is anybody working on this CW/TX/RX problem? I take it this would be in the ANAN firmware and not Thetis.
I think this explains how my Pixel Pro quit working (burned out the amp) twice.
by w9mdb
Sat Dec 02, 2023 4:14 am
Forum: Thetis
Topic: Frequency out of sync with WSJT-x
Replies: 2
Views: 2105

Re: Frequency out of sync with WSJT-x

Please place this file as described below https://www.dropbox.com/s/t52ngcalsgnpm8m/wsjtx_log_config.ini?dl=0 C:\Users\[username]\AppData\Local\WSJT-X The WSJT-X_Rigcontrol.log file will be in the same location Here's a youtube video showing Windows users howto -- https://www.youtube.com/watch?v=q9t...
by w9mdb
Mon Nov 27, 2023 2:15 pm
Forum: Digital Mode, Rig Control & Logging Software
Topic: How to connect Thetis to Ham Radio Deluxe via TCP/IP for rig control etc.
Replies: 7
Views: 7089

Re: How to connect Thetis to Ham Radio Deluxe via TCP/IP for rig control etc.

Use this
https://freecomportredirector.com/

Create a TCP/IP Port to 127.0.0.1:13013 (RAW) for example.
You can pick an available (i.e. empty) COM port for the redirector to use.

Set HRD to PowerSDR 115,200

Mike W9MDB
by w9mdb
Mon Nov 27, 2023 1:04 pm
Forum: Digital Mode, Rig Control & Logging Software
Topic: How to connect Thetis to Ham Radio Deluxe via TCP/IP for rig control etc.
Replies: 7
Views: 7089

Re: How to connect Thetis to Ham Radio Deluxe via TCP/IP for rig control etc.

HRD is going to rewrite their rig control logic in the future. They are actually completely rewriting HRD to be portable (e.g. Linux + MacOS)

HRD as of now should be able to connect as a TS-2000 to one of the Thetis CAT ports if you use virtual serial ports.
by w9mdb
Sun Nov 26, 2023 1:02 pm
Forum: Apache Labs News
Topic: ANAN-G2 Shipping Update
Replies: 255
Views: 3049425

Re: ANAN-G2 Shipping Update

Last update was Oct 31st -- seems if you didn't see this you aren't in the first batch...I'm holding my breath now since it's 26 days from this last update... And I quote: Just a quick update to let you know that we are about 3-4 weeks away from shipping out the first batch of the G2-1Ks, if you hav...
by w9mdb
Thu Nov 16, 2023 12:54 pm
Forum: G2 Operating System & Applications
Topic: New G2 with display and problems
Replies: 30
Views: 23694

Re: ANAN-G2 Shipping Update

Wireless/bluetooth might work if you reduce the Sample Rate in Setup/Audio...try 6000 for bluetooth and wireless may be able to do higher. Both those protocols are not designed for high-speed sample rates. Is your wireless 2.4GHz? What does an internet speed check show for your bandwidth? Why do you...
by w9mdb
Wed Nov 15, 2023 2:09 pm
Forum: G2 Operating System & Applications
Topic: New G2 with display and problems
Replies: 30
Views: 23694

Re: ANAN-G2 Shipping Update

And what does "doesn't work properly " mean exactly?
by w9mdb
Tue Nov 14, 2023 4:09 pm
Forum: Apache Labs News
Topic: ANAN-G2 Shipping Update
Replies: 255
Views: 3049425

Re: ANAN-G2 Shipping Update

As for date I look at it this way...Aug 28 they were estimating 63 days out....Oct 31 28 days out...so we are converging on zero ETA.
Assuming linear progression that would be Dec 17th....but it may not be linear :-)

Date ETA ETA Days
28-Aug 30-Oct 63
31-Oct 28-Nov 28
by w9mdb
Mon Nov 06, 2023 5:02 pm
Forum: Digital Mode, Rig Control & Logging Software
Topic: SDC Skimmer
Replies: 2
Views: 2065

Re: SDC Skimmer

What video?
by w9mdb
Wed Nov 01, 2023 9:09 pm
Forum: Thetis
Topic: CPU Volts and Amp meters not working - Thetis 2.10.2.2
Replies: 8
Views: 1850

Re: CPU Volts and Amp meters not working - Thetis 2.10.2.2

I'm running a 7000DLE MKII (soon to be replaced by a G-2-1K)
CPU usage on mine pretty matches the System number but the Thetis-only number is a bit low compared to what System Informer shows by about a factor of 2.
System informer is MUCH better than task manager.
https://www.systeminformer.com/

Go to advanced search