Search found 46 matches
- Thu Jun 16, 2022 10:23 pm
- Forum: Digital Mode, Rig Control & Logging Software
- Topic: No Output power when WSJT-X Tune button is activated
- Replies: 7
- Views: 2593
No Output power when WSJT-X Tune button is activated
THETIS Crashed during an FT8 Contact and no longer functions with WSJT-X Postby Dick » Thu Jun 16, 2022 3:21 pm Greetings All After several Issues (blank Panafall screen after upgrading to THETIS v2.9.0.6 x64) were solved with great mentoring, I was successfully running THETIS with WSJT-X (v2.5.4 ),...
- Thu Jun 16, 2022 7:25 pm
- Forum: Thetis
- Topic: When running a new install of THETIS SW the panafall display in the THETIS main window is totally BLANK
- Replies: 29
- Views: 5185
Re: When running a new install of THETIS SW the panafall display in the THETIS main window is totally BLANK
With that information we cannot tell what firmware is actually loaded into the ANAN-200D, but it appears to be Protocol 2 firmware. Were you the one who loaded the firmware? Do you have the firmware file you used to load the 200D? If so, what is the name of it? Please use this link, Method 2, to de...
- Thu Jun 16, 2022 7:15 pm
- Forum: Thetis
- Topic: When running a new install of THETIS SW the panafall display in the THETIS main window is totally BLANK
- Replies: 29
- Views: 5185
Re: When running a new install of THETIS SW the panafall display in the THETIS main window is totally BLANK
Dick, this sounds to me like it could be RF getting into your Ethernet cable. What happens if you set the Level control in Thetis to zero to cause zero power output and then click "tune" on WSJT? Does it still fail? If not, start advancing the level control and see if there is a point tha...
- Thu Jun 16, 2022 4:02 pm
- Forum: Thetis
- Topic: When running a new install of THETIS SW the panafall display in the THETIS main window is totally BLANK
- Replies: 29
- Views: 5185
Re: When running a new install of THETIS SW the panafall display in the THETIS main window is totally BLANK
OK, so it's just copper Ethernet wiring between the PC and the ANAN. Nice and simple. All I can offer is to continue to run and gain more experience with your current configuration and see if problems persist. Note that is could be a bad cable. This has happened before. Move just one piece of equip...
- Thu Jun 16, 2022 3:02 pm
- Forum: Thetis
- Topic: When running a new install of THETIS SW the panafall display in the THETIS main window is totally BLANK
- Replies: 29
- Views: 5185
Re: When running a new install of THETIS SW the panafall display in the THETIS main window is totally BLANK
Dick--I've explained to you that it's one problem per topic and you are now combining at least 4 problems into one topic :? 1. Blank spectral display: fixed with Windows update. 2. OC control of amp: not tested by you yet, may not be a problem. 3. Thetis quit working unexpectedly. 4. Some sort of p...
- Thu Jun 16, 2022 5:20 am
- Forum: Thetis
- Topic: When running a new install of THETIS SW the panafall display in the THETIS main window is totally BLANK
- Replies: 29
- Views: 5185
Re: When running a new install of THETIS SW the panafall display in the THETIS main window is totally BLANK
You can try the suggestions at this link: https://www.zdnet.com/article/heres-how-you-can-still-get-a-free-windows-10-upgrade/ However at this point it might be worth considering a clean install of Windows 10 on a new license. Good morning Scott I am exceedingly pleased to report after failures yes...
- Thu Jun 16, 2022 3:02 am
- Forum: Thetis
- Topic: When running a new install of THETIS SW the panafall display in the THETIS main window is totally BLANK
- Replies: 29
- Views: 5185
Re: When running a new install of THETIS SW the panafall display in the THETIS main window is totally BLANK
Glad to read it sorted itself out. Windows 7 is a dead OS. No longer supported. It'll be a bit of work, but ultimately you probably want to migrate to Windows 10. Greetings All After experimenting with the "OC - Pins" on the relevant THETIS screen, I was able to use whichever pin I chose ...
- Tue Jun 14, 2022 3:41 pm
- Forum: Thetis
- Topic: When running a new install of THETIS SW the panafall display in the THETIS main window is totally BLANK
- Replies: 29
- Views: 5185
Re: When running a new install of THETIS SW the panafall display in the THETIS main window is totally BLANK
You can try the suggestions at this link: https://www.zdnet.com/article/heres-how-you-can-still-get-a-free-windows-10-upgrade/ However at this point it might be worth considering a clean install of Windows 10 on a new license. Good morning Scott I am exceedingly pleased to report after failures yes...
- Tue Jun 14, 2022 12:56 am
- Forum: Thetis
- Topic: When running a new install of THETIS SW the panafall display in the THETIS main window is totally BLANK
- Replies: 29
- Views: 5185
Re: When running a new install of THETIS SW the panafall display in the THETIS main window is totally BLANK
OK, where you instruct ===> It looks like you've hit the nail right on the head there, Dick![/quote] The first thing you want to do is make certain that your Windows 7 installation is up to date. Open the Windows Update control panel and check for updates. The PC will have to be connected to the int...
- Mon Jun 13, 2022 4:56 pm
- Forum: Thetis
- Topic: When running a new install of THETIS SW the panafall display in the THETIS main window is totally BLANK
- Replies: 29
- Views: 5185
Re: When running a new install of THETIS SW the panafall display in the THETIS main window is totally BLANK
K1LSB wrote:Please post screenshots of the entire Thetis main console while operating in RX and TX mode in WSJT-X FT8 so we can see exactly what you're talking about.
Mark
I hope this attachment works !
Dick/w7wkr
- Mon Jun 13, 2022 4:49 pm
- Forum: Thetis
- Topic: When running a new install of THETIS SW the panafall display in the THETIS main window is totally BLANK
- Replies: 29
- Views: 5185
Re: When running a new install of THETIS SW the panafall display in the THETIS main window is totally BLANK
In Setup > H/W Select, what happens when you click the "Firewall Check" button? When I 'clicked' on Firewall Check the result was shut down THETIS and run as Administrator. I 'clicked' on the power switch and then the red X at the top right corner of the frame. It required me to do extra ...
- Mon Jun 13, 2022 3:24 pm
- Forum: Thetis
- Topic: When running a new install of THETIS SW the panafall display in the THETIS main window is totally BLANK
- Replies: 29
- Views: 5185
Re: When running a new install of THETIS SW the panafall display in the THETIS main window is totally BLANK
Good morning Scott - Is the panafall blank all the time, only during TX, or only during RX? The Panafall display remains totally dark during RX and TX - Does the panafall work when you are using phone or CW modes (not WSJT-X)? I selected every available mode (CW/AM/etc) and the Panafall display is t...
- Mon Jun 13, 2022 5:17 am
- Forum: Thetis
- Topic: When running a new install of THETIS SW the panafall display in the THETIS main window is totally BLANK
- Replies: 29
- Views: 5185
When running a new install of THETIS SW the panafall display in the THETIS main window is totally BLANK
Greeting everyone I downloaded and installed the most recent THETIS SW v2.9.0.6 x64 (4/23/22). Now, with the new THETIS SW running, I see the expected activity of WSJT-X FT8 decoding BUT the Panafall display in the THETIS main window is totally BLANK ! What's happening with the display ? I make some...
- Mon Jun 13, 2022 12:41 am
- Forum: Amplifiers & Tuners
- Topic: Using THETIS SW to control a 200D can not control an external amplifier
- Replies: 3
- Views: 4840
Re: Using THETIS SW to control a 200D can not control an external amplifier
Hello Scott 1 - OK, I downloaded and installed the most recent THETIS SW you specified. 2 - I accessed the 'page' you specified and chose "Pin #7" BUT have not verified one of the pins on the DB-25 connector responds - have to move the computer out to the remote site to verify 3 - I was pr...
- Sat Jun 11, 2022 5:40 pm
- Forum: Amplifiers & Tuners
- Topic: Using THETIS SW to control a 200D can not control an external amplifier
- Replies: 3
- Views: 4840
Using THETIS SW to control a 200D can not control an external amplifier
Hello everyone Now that I am using THETIS v2.8.11 software to control a 200D I am no longer able to use the rear panel connection to control an external amplifier. The THETIS User Manual says to use a USB-to-Serial port converter to control external things like a CW-key and controlling an external a...
- Fri Mar 06, 2020 4:54 am
- Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
- Topic: 7000dle Squeal noise while TXing Digital Modes
- Replies: 3
- Views: 4374
Re: 7000dle Squeal noise while TXing Digital Modes
Greetings all
For whatever reason unknown to me, the squeal has suddenly quit.
Thank you for reading this series.
73 Dick/w7wkr at CN97uj
For whatever reason unknown to me, the squeal has suddenly quit.
Thank you for reading this series.
73 Dick/w7wkr at CN97uj
- Fri Mar 06, 2020 1:14 am
- Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
- Topic: 7000dle Squeal noise while TXing Digital Modes
- Replies: 3
- Views: 4374
Re: 7000dle Squeal noise while TXing Digital Modes
Hello Yes, I power-cycled the 7000dle and reset the database and nothing changed. The way it is 'singing' to my ear, it is quite undesireable - very penetrating tone. I need to change the WSPR tone frequency and see if the squeal changes note too. Maybe some sort of transformer lamination vibration ...
- Thu Mar 05, 2020 8:08 pm
- Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
- Topic: 7000dle Squeal noise while TXing Digital Modes
- Replies: 3
- Views: 4374
7000dle Squeal noise while TXing Digital Modes
Recently while typing in a frequency an error was made and HPSDR mRX PS software set the frequency to ~62.xxx MHz. A BIG resounding bunch of relays clicked inside the 7000 and ever since that event there is a fairly loud high-pitched tone coming from inside the case during digital (FT8/WSPR) transmi...
- Fri Nov 15, 2019 3:40 pm
- Forum: Digital ("Virtual") Audio
- Topic: VAC Tutorial
- Replies: 13
- Views: 37594
Re: VAC Tutorial
Tony -- Tony EI7BMB -- Many thanks for the detailed picture of Voicemeeter's signal routing. VM and my computer have been playing well for me for quite a while now BUT sometimes I have to resort to my detailed notes for all the settings in the WSPR/VM/Soundcard configuration when everything quits wo...
- Mon Aug 05, 2019 5:34 pm
- Forum: Digital Mode, Rig Control & Logging Software
- Topic: 200D Receiver Locks-up Running HPSDR mRX PS v2.0.1 AND WSJT-X
- Replies: 3
- Views: 5059
Re: 200D Receiver Locks-up Running HPSDR mRX PS v2.0.1 AND WSJT-X
I have Voicemeeter setup as it was working fine connecting audio between computer and HPSDR - ran smoothly for months. In the past I tried with the help of many to get HPSDR mRX PS v3.4.9 to work and always suffered 'can not get there from here' messages. Next tried v3.4.8 with same results and fina...
- Mon Aug 05, 2019 1:03 am
- Forum: Digital Mode, Rig Control & Logging Software
- Topic: 200D Receiver Locks-up Running HPSDR mRX PS v2.0.1 AND WSJT-X
- Replies: 3
- Views: 5059
Re: 200D Receiver Locks-up Running HPSDR mRX PS v2.0.1 AND WSJT-X
Arrrgh ! I got my SW ID's mixed-up!
That should have been HPSDR mRX PS v3.4.7 and WSJT-X v2.1.0 (with FT4) and back to WSJT-X v2.0.1 (W/O FT4)
73 Dick/w7wkr at CN98pi
That should have been HPSDR mRX PS v3.4.7 and WSJT-X v2.1.0 (with FT4) and back to WSJT-X v2.0.1 (W/O FT4)
73 Dick/w7wkr at CN98pi
- Sun Aug 04, 2019 11:42 pm
- Forum: Digital Mode, Rig Control & Logging Software
- Topic: 200D Receiver Locks-up Running HPSDR mRX PS v2.0.1 AND WSJT-X
- Replies: 3
- Views: 5059
200D Receiver Locks-up Running HPSDR mRX PS v2.0.1 AND WSJT-X
Well, the continuing saga of system problems with my ANAN-200D continues! Everything was running to my total satisfaction for quite while with my ANAN-200Da using OpenHPSDR mRX PS v3.4.7 and WSJT-x v2.0.1 on a DELL laptop running Win-7 (using Voicemeeter Banana for cordless operation.) THEN, I loade...
- Sat Jun 22, 2019 3:02 pm
- Forum: Digital Mode, Rig Control & Logging Software
- Topic: ANAN-200D and WSJT-X/FT8 TX tone on waterfall display mushrooms
- Replies: 37
- Views: 29546
Re: ANAN-200D and WSJT-X/FT8 TX tone on waterfall display mushrooms
Greetings All - Many thanks for the suggestions. I now have things set up correctly and the 7000dle/SW is working well together.
73 Dick/w7wkr
73 Dick/w7wkr
- Thu Jun 06, 2019 4:54 am
- Forum: Digital Mode, Rig Control & Logging Software
- Topic: ANAN-200D and WSJT-X/FT8 TX tone on waterfall display mushrooms
- Replies: 37
- Views: 29546
Re: ANAN-200D and WSJT-X/FT8 TX tone on waterfall display mushrooms
Why not follow the instructions in the tutorial instead of guessing? Your setup is completely wrong. Excellent suggestion ! That is something I have to do AGAIN tomorrow. I have been referring to the notes I maintain and they have not extracted me from the 'ditch' I got myself into this afternoon. ...
- Wed Jun 05, 2019 11:07 pm
- Forum: Digital Mode, Rig Control & Logging Software
- Topic: ANAN-200D and WSJT-X/FT8 TX tone on waterfall display mushrooms
- Replies: 37
- Views: 29546
Re: ANAN-200D and WSJT-X/FT8 TX tone on waterfall display mushrooms
Hi Dick, perhaps try clicking on MUTE on the external mic slider in voicemeeter banana ,perhaps there is a feedback loop that with latency sounds like reverb. Having said that that the input is not selected anyway but worth a shot. I notice also 0.01 - bass on voicemeeter banana , reset that to 0 j...
- Wed Jun 05, 2019 2:59 am
- Forum: Digital Mode, Rig Control & Logging Software
- Topic: ANAN-200D and WSJT-X/FT8 TX tone on waterfall display mushrooms
- Replies: 37
- Views: 29546
Re: ANAN-200D and WSJT-X/FT8 TX tone on waterfall display mushrooms
You cannot just paste from the clipboard into a post. You have to save each screenshot to file. Then look carefully below the editor window on the forum and you'll see the "Options" and "Attachments" tabs. Choose the Attachments tab, click "Add Files" and add the files...
- Wed Jun 05, 2019 2:35 am
- Forum: Digital Mode, Rig Control & Logging Software
- Topic: ANAN-200D and WSJT-X/FT8 TX tone on waterfall display mushrooms
- Replies: 37
- Views: 29546
Re: ANAN-200D and WSJT-X/FT8 TX tone on waterfall display mushrooms
You cannot just paste from the clipboard into a post. You have to save each screenshot to file. Then look carefully below the editor window on the forum and you'll see the "Options" and "Attachments" tabs. Choose the Attachments tab, click "Add Files" and add the files...
- Wed Jun 05, 2019 2:29 am
- Forum: Digital Mode, Rig Control & Logging Software
- Topic: ANAN-200D and WSJT-X/FT8 TX tone on waterfall display mushrooms
- Replies: 37
- Views: 29546
Re: ANAN-200D and WSJT-X/FT8 TX tone on waterfall display mushrooms
You cannot just paste from the clipboard into a post. You have to save each screenshot to file. Then look carefully below the editor window on the forum and you'll see the "Options" and "Attachments" tabs. Choose the Attachments tab, click "Add Files" and add the files...
- Tue Jun 04, 2019 9:39 pm
- Forum: Digital Mode, Rig Control & Logging Software
- Topic: ANAN-200D and WSJT-X/FT8 TX tone on waterfall display mushrooms
- Replies: 37
- Views: 29546
Re: ANAN-200D and WSJT-X/FT8 TX tone on waterfall display mushrooms
Dick, We need a whole bunch of screen shots to know what is going on. There should be no reverb sounds or anything else weird. You almost certainly have a problem with your setup somewhere. Please post screen shots as follows: 1. Panafall with DUP on showing your transmitted FT8 waveform. Show the ...
- Tue Jun 04, 2019 7:23 pm
- Forum: Digital Mode, Rig Control & Logging Software
- Topic: ANAN-200D and WSJT-X/FT8 TX tone on waterfall display mushrooms
- Replies: 37
- Views: 29546
Re: ANAN-200D and WSJT-X/FT8 TX tone on waterfall display mushrooms
As Scott would say "google is your friend" ... here is what a quick search brought up ("set affinity using WIndows 7"): 1 Press ctrl + alt + del to bring up the Windows Task Manager, and navigate to the Processes tab. 2 Find the program on which you want to set affinity. ... 3 U...