Search found 164 matches
- Sat Apr 13, 2024 3:54 pm
- Forum: piHPSDR
- Topic: piHPSDR with G2 RX2 audio output
- Replies: 5
- Views: 2284
Re: piHPSDR with G2 RX2 audio output
Disable Diversity!
- Sat Apr 06, 2024 2:46 pm
- Forum: piHPSDR
- Topic: piHPSDR with G2 RX2 audio output
- Replies: 5
- Views: 2284
Re: piHPSDR with G2 RX2 audio output
Hi Norbert,
I am using built 2024-01-26. I can run 2 receivers at 192000 without problems. Second RX is assigned to VFO B. you can change to RX2 (activate) by clicking on the spectrum. The S-meter and headphone audio are always related to the active RX. Split is working as well.
73
Volker
DL4ZBG
I am using built 2024-01-26. I can run 2 receivers at 192000 without problems. Second RX is assigned to VFO B. you can change to RX2 (activate) by clicking on the spectrum. The S-meter and headphone audio are always related to the active RX. Split is working as well.
73
Volker
DL4ZBG
- Thu Apr 04, 2024 1:49 pm
- Forum: piHPSDR
- Topic: piHPSDR with G2 RX2 audio output
- Replies: 5
- Views: 2284
piHPSDR with G2 RX2 audio output
Hi all, if you are running piHPSDR with two receivers enabled, it is not possible to listen to both receivers simultaneously via the headphones. This is a big disadvantage for split DX chasing... However, on page 61 of the piHPSDR manual the LOCAL AUDIO OUTPUT checkboxes and options are described. I...
- Thu Apr 04, 2024 1:20 pm
- Forum: piHPSDR
- Topic: piHPSDR with G2 with display - Transverters
- Replies: 3
- Views: 5253
Re: piHPSDR with G2 with display - Transverters
Transverter RX Gain has been added in January 2024.
TNX again
Volker
TNX again
Volker
- Fri Mar 29, 2024 11:14 pm
- Forum: G2 Operating System & Applications
- Topic: New G2 with display and problems
- Replies: 33
- Views: 32531
Re: New G2 with display and problems
After waiting 4 weeks for delivery, my cable arrived on the 19th of March. On request I received wiring information the next day. Unfortunately the cable provided by AL was about 4" too short. So I finally crossed Pins 9 an 10 (suggested by Laurence) in the old cable, this was not complicated. ...
- Sun Feb 25, 2024 4:06 pm
- Forum: Amplifiers & Tuners
- Topic: New Apache Labs 1.5KW Linear Amplifier
- Replies: 4
- Views: 1657
Re: New Apache Labs 1.5KW Linear Amplifier
I'd be interested how Apache have implemented the control board. From the specs it appears the control board is at least compatible with Rz1ZR's latest version. He does a very good job with the software (I have a VKamp running his software) but his hardware implementation is Ho Hum with a bunch of ...
- Mon Feb 19, 2024 5:07 pm
- Forum: G2 Operating System & Applications
- Topic: New G2 with display and problems
- Replies: 33
- Views: 32531
Re: New G2 with display and problems
Hello Tony, any news on this cable? Regards Volker Volker, The modified cables have been ordered and will be provided FOC once available. Regards, Tony Laurence, I know that this is more a volunteer project than an industrial product like Kenwood TRXs.. BUT for 4000 bucks I would expect some kind of...
- Wed Feb 07, 2024 10:17 am
- Forum: G2 Operating System & Applications
- Topic: Script to download the latest Pro2 and P2app
- Replies: 19
- Views: 1810
Re: Script to download the latest Pro2 and P2app
I had the same problem with FW V12. You have to install the latest version of piHPSDR to have output (26th Jan 2024).
73
Volker
DL4ZBG
73
Volker
DL4ZBG
- Wed Jan 31, 2024 9:41 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: Firmware fix for RF appearing on RX only ports
- Replies: 77
- Views: 13055
Re: Firmware fix for RF appearing on RX only ports
Update: I cannot find p2app and FPGA FW in another location thanin N1GP's repository. Laurence, is the firmware also available in the DL1YCF repository? I was not able to load V12 file... 73 Volker No, the firmware is only available in the Saturn repository. Can you share some details of what the p...
- Mon Jan 29, 2024 6:52 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: Firmware fix for RF appearing on RX only ports
- Replies: 77
- Views: 13055
Re: Firmware fix for RF appearing on RX only ports
Update: I cannot find p2app and FPGA FW in another location thanin N1GP's repository.
Laurence,
is the firmware also available in the DL1YCF repository? I was not able to load V12 file...
73
Volker
Laurence,
is the firmware also available in the DL1YCF repository? I was not able to load V12 file...
73
Volker
- Wed Jan 17, 2024 5:15 pm
- Forum: Apache-specific Hardware Discussions
- Topic: G2 Power On and Off Procedure
- Replies: 11
- Views: 12543
Re: G2 Power On and Off Procedure
Hello, my G2 Saturn with display (mostly running piHPSDR) does behave exactily as described in the manualin terms on power off behaviour. - I remember one single event where the system got hot after shutdown. But this was before I made the Firmeware Update and changed some Pi startup setting. This n...
- Thu Nov 30, 2023 9:53 am
- Forum: Apache Labs News
- Topic: ANAN-G2 Shipping Update
- Replies: 314
- Views: 3186503
Re: ANAN-G2 Shipping Update
"qst" (LOL) : having only one TRX and selling it before getting the new one isn't very smart. I bought ANAN 10 ANAN 100 ANAN 7000 DLE and some daughterboards from Apache Labs. My experience is, that when you get the invoice and pay it, you get the stuff within 1-3 weeks depending on custom...
- Thu Nov 09, 2023 6:57 am
- Forum: G2 Operating System & Applications
- Topic: G2 with Display piHPSDR encoder issues
- Replies: 3
- Views: 4584
Re: G2 with Display piHPSDR encoder issues
Issue has been fixed in latest piHPSDR version and encoders are working well now.
73
Volker
73
Volker
- Fri Nov 03, 2023 5:26 pm
- Forum: G2 Operating System & Applications
- Topic: New G2 with display and problems
- Replies: 33
- Views: 32531
Re: New G2 with display and problems
Volker, The modified cables have been ordered and will be provided FOC once available. Regards, Tony Laurence, I know that this is more a volunteer project than an industrial product like Kenwood TRXs.. BUT for 4000 bucks I would expect some kind of mod kit from the "factory" like the fan...
- Fri Nov 03, 2023 9:18 am
- Forum: G2 Operating System & Applications
- Topic: New G2 with display and problems
- Replies: 33
- Views: 32531
Re: New G2 with display and problems
Laurence,
I know that this is more a volunteer project than an industrial product like Kenwood TRXs..
BUT for 4000 bucks I would expect some kind of mod kit from the "factory" like the fan mod ANAN7000.
73
Volker
DL4ZBG
I know that this is more a volunteer project than an industrial product like Kenwood TRXs..
BUT for 4000 bucks I would expect some kind of mod kit from the "factory" like the fan mod ANAN7000.
73
Volker
DL4ZBG
- Wed Nov 01, 2023 6:33 pm
- Forum: G2 Operating System & Applications
- Topic: G2 with Display piHPSDR encoder issues
- Replies: 3
- Views: 4584
- Mon Oct 30, 2023 9:04 pm
- Forum: G2 Operating System & Applications
- Topic: G2 with Display piHPSDR encoder issues
- Replies: 3
- Views: 4584
G2 with Display piHPSDR encoder issues
Hi all,
my G2 is running well with the latest updates installed, except of the fact that all 4 (8) dual rotary encoders do not react on every second step. If you are rotating the knobs slowly this is very annoying. Does anyone have the same problem?
Thanks
Volker
DL4ZBG
my G2 is running well with the latest updates installed, except of the fact that all 4 (8) dual rotary encoders do not react on every second step. If you are rotating the knobs slowly this is very annoying. Does anyone have the same problem?
Thanks
Volker
DL4ZBG
- Fri Oct 27, 2023 5:38 pm
- Forum: piHPSDR
- Topic: piHPSDR with G2 - summary of my issues
- Replies: 11
- Views: 7236
Re: piHPSDR with G2 - summary of my issues
Hello all, here a short summary of my current issues with piHPSDR/G2 harware 1) Encoder menue no storing changes - already reported 2) After the latest update I cannot find the sample rate setting (radio menue) 3) knacks/glitches in rx audio -already reported EDIT at 96kHz sampling rate RX audio se...
- Sun Oct 22, 2023 9:18 pm
- Forum: Apache-specific Hardware Discussions
- Topic: G2 with diplay using HDMI output
- Replies: 2
- Views: 4440
Re: G2 with diplay using HDMI output
Hi Laurence, at startup I see the raspberry pi start screen only on HDMI, but only for a very short time. After that, I only see booting and starting of the application on the touchscreen, as before. HDMI monitor is not active any more (power save).Display->Preferences shows HDMI1. But I cannot sele...
- Sat Oct 14, 2023 10:15 pm
- Forum: G2 Operating System & Applications
- Topic: G2 and piHPSDR build 2 08 Pi reboots
- Replies: 3
- Views: 4710
Re: G2 and piHPSDR build 2 08 Pi reboots
Finally found an issue: if one plugs in a HDMI cable, the pi reboots, if it is removed, everything is fine. Looks like a "wake on ..." setting in the pi preferences causes the trouble.
- Wed Oct 11, 2023 9:18 pm
- Forum: Apache-specific Hardware Discussions
- Topic: G2 with diplay using HDMI output
- Replies: 2
- Views: 4440
G2 with diplay using HDMI output
Hello, now my G2 Saturn is running much better with piHPSDR. I am just asking myself whether ist is possible to duplicate the 7" screen to a monitor? Did anyone connect a separate Monitor to one of the HDMI outputs so far? Do I have to change any settings for that in the pi setup (e.g. preferen...
- Sun Oct 08, 2023 10:06 pm
- Forum: piHPSDR
- Topic: piHPSDR with G2 with display - Transverters
- Replies: 3
- Views: 5253
Re: piHPSDR with G2 with display - Transverters
Update: in version 2023/10/04 transverters work (thanks to DL1YCF). I have been configuring my 3 transverters for 144/14 HA1YA 432/28 homebrew 1296/52 DB6NT Very important is the value of PA gain in order to get a clean output signal. For 0dBm at 14 and 28 the value is about 70.7 and for 52 it is sl...
- Sat Sep 30, 2023 7:56 am
- Forum: piHPSDR
- Topic: piHPSDR with G2 with display - Transverters
- Replies: 3
- Views: 5253
Re: piHPSDR with G2 with display - Transverters
UPDATE:
in version 9/29 of piHPSDR transverter bands can be activated, but the RX routing (selection in ANT menue) to the xvert input does not work and the selection is not stored as well.
73
Volker
in version 9/29 of piHPSDR transverter bands can be activated, but the RX routing (selection in ANT menue) to the xvert input does not work and the selection is not stored as well.
73
Volker
- Mon Sep 25, 2023 9:17 pm
- Forum: piHPSDR
- Topic: piHPSDR with G2 with display - Transverters
- Replies: 3
- Views: 5253
piHPSDR with G2 with display - Transverters
Hello, it is possible to create transverter bands in piHPSDR similar to Thetis. BUT I did not succeed in switching to these band, you see the buttons in the "Band" menu, but you cannot activate them. - is this a future option? - do I have to make manual entries somewhere in some kinda &quo...
- Fri Sep 22, 2023 9:47 pm
- Forum: piHPSDR
- Topic: G2 and piHPSDR RigCtrl startup of CAT connection
- Replies: 6
- Views: 6183
Re: G2 and piHPSDR RigCtrl startup of CAT connection
CAT is back in operation, TNX Rick.
I fully agree with Scott. Developers of piHPSDR always update on Github and is not obvious for us "users" whether it is recommended to update from Github or not.
73
Volker
I fully agree with Scott. Developers of piHPSDR always update on Github and is not obvious for us "users" whether it is recommended to update from Github or not.
73
Volker
- Fri Sep 22, 2023 9:41 pm
- Forum: piHPSDR
- Topic: piHPSDR G2 encoder menue
- Replies: 13
- Views: 7871
Re: piHPSDR G2 encoder menue
Tried a couple of encoder control options, seems to work fine now. Thanks a lot Rick!
However, some encoder switches like "PS" or "COMP" still do not work.
TNX
Volker
However, some encoder switches like "PS" or "COMP" still do not work.
TNX
Volker
- Thu Sep 21, 2023 11:03 am
- Forum: piHPSDR
- Topic: G2 and piHPSDR RigCtrl startup of CAT connection
- Replies: 6
- Views: 6183
Re: G2 and piHPSDR RigCtrl startup of CAT connection
Thank you Rick! I really appreciate your work and your fast replies.
- Thu Sep 21, 2023 9:52 am
- Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
- Topic: ANAN G2 with display booting after power is supplied
- Replies: 1
- Views: 4766
ANAN G2 with display booting after power is supplied
Hello,
after an update of piHPSDR my ANAN is behaving strange. After switching on the 13.8V supply, it starts without I have pressed the button. After powering down it restarts after 4 seconds.
Is this a hardware failure or a new feature? Any ideas will be highly appreciated.
73
Volker
DL4ZBG
after an update of piHPSDR my ANAN is behaving strange. After switching on the 13.8V supply, it starts without I have pressed the button. After powering down it restarts after 4 seconds.
Is this a hardware failure or a new feature? Any ideas will be highly appreciated.
73
Volker
DL4ZBG
- Wed Sep 20, 2023 10:04 pm
- Forum: piHPSDR
- Topic: G2 and piHPSDR RigCtrl startup of CAT connection
- Replies: 6
- Views: 6183
Re: G2 and piHPSDR RigCtrl startup of CAT connection
Updated to release 9/19. After that update, CAT refused to work.
Anyone experiencing the same?
73
Volker
Anyone experiencing the same?
73
Volker
- Mon Sep 18, 2023 11:07 am
- Forum: piHPSDR
- Topic: piHPSDR with G2 - summary of my issues
- Replies: 11
- Views: 7236
Re: piHPSDR with G2 - summary of my issues
It is puzzling why the G2 local pihpsdr produces these little gaps and hick-ups in the audio. Better to continue this discussion in the original topic (https://community.apache-labs.com/viewtopic.php?f=7&t=4792), but it's a good bet that piHPSDR running on a CM4 just can't keep up with the real...