Search found 15 matches

by Jay_N2MGA
Mon Mar 30, 2020 5:56 pm
Forum: Thetis
Topic: Wave Record/Play function not working properly
Replies: 9
Views: 6478

Re: Wave Record/Play function not working properly

Ok, found a bit of weirdness, with VAC enabled, made a quick front panel recording, tried to xmit the playback, this did not work as noted in prior posts. But, was able to xmit the playback with VAC disabled. This method also works for recordings made via the Wave panel while VAC is enabled, xmittin...
by Jay_N2MGA
Sun Mar 29, 2020 12:23 am
Forum: Thetis
Topic: Wave Record/Play function not working properly
Replies: 9
Views: 6478

Re: Wave Record/Play function not working properly

Hmmmm, using Thetis v2.7.0 (3/1/20) MW0LGE (a3); I can report that the front panel quick record and playback works and can xmit the playback without any issues. Additionally, I can also utilize the Wave panel Record button and routine of clicking the Add button to select the newly recorded .wav file...
by Jay_N2MGA
Fri Feb 01, 2019 9:27 pm
Forum: Protocol 2 Firmware (all radios)
Topic: 7000 and 8000 Protocol 2 users: what say you?
Replies: 41
Views: 36579

Re: 7000 and 8000 Protocol 2 users: what say you?

I had the same result as others with the v1.6 repo and my 8000, reverted back to v1.6 pre and that setup with Thetis v.2.6.2 restores the stability regarding SEQ errors, Pure Signal etc... On a side note, v1.6 pre with Simon's latest v3.0.4 SDR Radio console is also quite stable...

jay
n2mga
by Jay_N2MGA
Fri Jan 11, 2019 3:03 am
Forum: Protocol 2 Firmware (all radios)
Topic: 7000 and 8000 Protocol 2 users: what say you?
Replies: 41
Views: 36579

Re: 7000 and 8000 Protocol 2 users: what say you?

Perfect, that's exactly what I was looking for, tnx again!

jj
n2mga
by Jay_N2MGA
Thu Jan 10, 2019 10:23 pm
Forum: Protocol 2 Firmware (all radios)
Topic: 7000 and 8000 Protocol 2 users: what say you?
Replies: 41
Views: 36579

Re: 7000 and 8000 Protocol 2 users: what say you?

Hi Scott, completely concur re; UDP packets being on the low end of priority & network congestion although albeit in reality it appears to be maybe one or a few packets involved, question for you, do you know where the Sequence number resides in the packet, i.e.; is it part of any header or is i...
by Jay_N2MGA
Thu Jan 10, 2019 6:52 pm
Forum: Protocol 2 Firmware (all radios)
Topic: 7000 and 8000 Protocol 2 users: what say you?
Replies: 41
Views: 36579

Re: 7000 and 8000 Protocol 2 users: what say you?

Ok, here are some observations that may offer up some data as to how/what/where/why the Seq indicator blinks. I ran some long duration Wireshark captures to observe the UDP traffic going back and forth to my 8000 and the Win 10 PC running Thetis 2.6.2 and FW 1.5. I have to preface this by saying tha...
by Jay_N2MGA
Mon Jan 07, 2019 9:13 pm
Forum: Thetis
Topic: Thetis v2.6.0 crashes when using Quick Record
Replies: 2
Views: 3399

Re: Thetis v2.6.0 crashes when using Quick Record

Hello Manny, I too see this same bug using quick record / playback while trying to do a second recording / playback. I've found that the quick record / playback will work multiple times if you key up the radio xmit Mox button and transmit the playback / unkey the radio back to receive and you'll be ...
by Jay_N2MGA
Mon Jan 07, 2019 8:34 pm
Forum: Thetis
Topic: HTTP Server?
Replies: 13
Views: 8279

Re: HTTP Server?

I know this thread is old but I was able to get the http server working by turning off Thetis, selecting the "On: Advanced" check box shown on the Cat Control/User Interface setup screen, turning on Thetis then browsing to the local IP 127.0.0.1:8081 port # address. Selecting "On: Bas...
by Jay_N2MGA
Thu Mar 08, 2018 4:34 pm
Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
Topic: GPSDO Tutorial?
Replies: 129
Views: 171839

Re: GPSDO Tutorial?

While on the topic of external GPSDO devices, I have a question I'd like to throw out to anyone that has an answer regarding the 8000 and the 10Mhz external input. On the main board this input traces back to, there are two jumpers labeled J24 and J22, the schematic shows these as "EXT CLK GND&...
by Jay_N2MGA
Tue Mar 06, 2018 8:12 pm
Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
Topic: GPSDO Tutorial?
Replies: 129
Views: 171839

Re: GPSDO Tutorial?

While on the topic of external GPSDO devices, I have a question I'd like to throw out to anyone that has an answer regarding the 8000 and the 10Mhz external input. On the main board this input traces back to, there are two jumpers labeled J24 and J22, the schematic shows these as "EXT CLK GND&q...
by Jay_N2MGA
Tue Mar 06, 2018 6:56 pm
Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
Topic: GPSDO Tutorial?
Replies: 129
Views: 171839

Re: GPSDO Tutorial?

Hey Brent, if you're still looking to setup a distribution board for the GPSDO have a look at rolling ur own at the following site; http://www.medpants.com/distribution-amplifier

pretty straight forward...

jay
n2mga
by Jay_N2MGA
Wed Nov 01, 2017 6:54 pm
Forum: PowerSDR mRX
Topic: Continuous Frequency Compressor (CFC) questions
Replies: 5
Views: 6355

Re: Continuous Frequency Compressor (CFC) questions

Hi Warren, this is good stuff, thank you for Replying. I did see the release notes prior to my posting and very much appreciate you taking the time to further the explanations. Another question for you; how easy would it be to use the same methodology of the CFC routines to create a CFL (continuous ...
by Jay_N2MGA
Wed Nov 01, 2017 12:10 am
Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
Topic: GPSDO Tutorial?
Replies: 129
Views: 171839

Re: GPSDO Tutorial?

the DSB/phase display works very well!

jay
n2mga
by Jay_N2MGA
Tue Oct 31, 2017 11:41 pm
Forum: PowerSDR mRX
Topic: Continuous Frequency Compressor (CFC) questions
Replies: 5
Views: 6355

Continuous Frequency Compressor (CFC) questions

Hello, can anyone point me in the right direction to find more information on what the CFC sliders are doing for the individual frequency bands? I can certainly hear a difference when making changes to the sliders and their associated frequencies. But, normally when I work with a typical compressor ...
by Jay_N2MGA
Tue Aug 15, 2017 3:33 am
Forum: PowerSDR mRX
Topic: Way to limit AF?
Replies: 8
Views: 8332

Re: Way to limit AF?

Hello Buck and everyone, I ran into this same scenario, loud/strong USB signals in a group mixed with weak/softer ones, using headphones became a problem for me with the loud/strong stations boosting the audio & AGC Gain to hear the weaker ones. I found some success using the AGC Slope setting l...

Go to advanced search