Hi Richie,
Since I upgraded to v2.10.3.3 occasionally I get a shut down error. The flash screen saying Thetis is closing never goes off the screen. If I try to force it to close I get the MS error message that windows is reporting the problem.
73, George
W2GS
Search found 36 matches
- Wed Nov 08, 2023 1:44 am
- Forum: Thetis
- Topic: Thetis v2.10.3.3 released
- Replies: 103
- Views: 57835
- Mon Nov 06, 2023 3:09 pm
- Forum: Digital Mode, Rig Control & Logging Software
- Topic: SDC Skimmer
- Replies: 2
- Views: 3005
SDC Skimmer
Richie,
Many thanks for the video showing how to setup SDC skimmer with Thetis TCI. Works great!
73, George
W2GS
Many thanks for the video showing how to setup SDC skimmer with Thetis TCI. Works great!
73, George
W2GS
- Tue Oct 24, 2023 12:28 pm
- Forum: Thetis
- Topic: TX Profile updates
- Replies: 22
- Views: 3079
Re: TX Profile updates
Hi Richie, TX profile feature requests. The first is to make NR2 status part off the saved profile or save it's current state until changed. NR2 is one of the best features of Thetis and it's operational state is somewhat erratic. The second is that the Band Stack remember the TX profile associated ...
- Wed Oct 11, 2023 11:38 am
- Forum: Thetis
- Topic: The 'You can' thread
- Replies: 5
- Views: 1258
Re: The 'You can' thread
Thanks for the video. It looks like a great feature.
73, George
W2GS
73, George
W2GS
- Tue Oct 10, 2023 11:53 am
- Forum: Thetis
- Topic: The 'You can' thread
- Replies: 5
- Views: 1258
Re: The 'You can' thread
Richie, nice list. What is VSQL. Thanks
73, George
W2GS
73, George
W2GS
- Sat Oct 07, 2023 12:05 pm
- Forum: Thetis
- Topic: Thetis v2.10.2 pre-release
- Replies: 43
- Views: 7953
Re: Thetis v2.10.2 pre-release
Hi Richie, I noticed a problem when operating split in CW vs SSB. If in SSB and split is turned on when the VFO B frequency is changed the transmit frequency lines move up/down the panadapter with VFO B frequency. (This also works when click tuning is turned on). In CW mode with "show TX Freq t...
- Sat Jun 25, 2022 9:15 pm
- Forum: Digital Mode, Rig Control & Logging Software
- Topic: DXLab now supports TCP/IP CAT for Thetis
- Replies: 6
- Views: 2621
Re: DXLab now supports TCP/IP CAT for Thetis
Scott,
I never saw the option for selecting Thetis as the radio in Commander. Got it working now. Thanks.
73, George
I never saw the option for selecting Thetis as the radio in Commander. Got it working now. Thanks.
73, George
- Sat Jun 25, 2022 1:56 pm
- Forum: Digital Mode, Rig Control & Logging Software
- Topic: DXLab now supports TCP/IP CAT for Thetis
- Replies: 6
- Views: 2621
Re: TCP/IP CAT Server
DXLABS has been updated to run TCP/IP with Thetis. I have tried connecting Commander to Thetis using TCP/IP and have not been able to get the connection to work. Has anyone got this working? If so can you post screen shots of your setting in Commander and Thetis. I am running the latest beta version...
- Fri Apr 22, 2022 3:45 pm
- Forum: Digital Mode, Rig Control & Logging Software
- Topic: DDUtil .NET Framework Problem
- Replies: 4
- Views: 1548
Re: DDUtil .NET Framework Problem
Scott,
Where did you move this?
George
Where did you move this?
George
- Fri Apr 22, 2022 3:43 pm
- Forum: Digital Mode, Rig Control & Logging Software
- Topic: DDUtil .NET Framework Problem
- Replies: 4
- Views: 1548
Re: DDUtil .NET Framework Problem
Thanks Scott,
73, George
W2GS
73, George
W2GS
- Thu Apr 21, 2022 5:26 pm
- Forum: Digital Mode, Rig Control & Logging Software
- Topic: DDUtil .NET Framework Problem
- Replies: 4
- Views: 1548
DDUtil .NET Framework Problem
This is problem is out of context but looking for help so please excuse the post. Last night Window updated my system. Now when I start DDUtil which I use with Thetis and other ham software DDUtil causes Window to send a Net Frames error. If I recall correctly there were similar issues with Anan Boo...
- Wed Oct 27, 2021 12:24 pm
- Forum: Thetis
- Topic: Thetis v2.8.11 - UPDATES and current issues
- Replies: 1752
- Views: 895112
Re: Thetis v2.8.11 - UPDATES and current issues
Hi Scott,
Yes both auto save TX profile boxes are checked.
73, George
W2GS
Yes both auto save TX profile boxes are checked.
73, George
W2GS
- Tue Oct 26, 2021 12:31 pm
- Forum: Thetis
- Topic: Thetis v2.8.11 - UPDATES and current issues
- Replies: 1752
- Views: 895112
Re: Thetis v2.8.11 - UPDATES and current issues
Hi Ritchie, Using ver 21k7. I am having problems with transmit profiles. When I change modes via the band buttons and band stack the SSB mode Transmit Profile doesn't always change to the parameters that were saved in the SSB profile. A simple example would be if a setup a profile "SSB" wi...
- Tue Sep 28, 2021 3:50 pm
- Forum: Thetis
- Topic: Thetis v2.8.11 - UPDATES and current issues
- Replies: 1752
- Views: 895112
Re: Thetis v2.8.11 - current issues
Hi Richie, Running version 21k3. For the last couple of updates Thetis doesn't remember changes to the Virtual Audio Cable Setup on the Audio tab. What's strange is if I update the driver and have to restart Thetis in a couple of minutes the change is remembered but will not be there the next day. ...
- Mon Sep 27, 2021 7:45 pm
- Forum: Thetis
- Topic: Thetis v2.8.11 - UPDATES and current issues
- Replies: 1752
- Views: 895112
Re: Thetis v2.8.11 - current issues
Hi Richie, Running version 21k3. For the last couple of updates Thetis doesn't remember changes to the Virtual Audio Cable Setup on the Audio tab. What's strange is if I update the driver and have to restart Thetis in a couple of minutes the change is remembered but will not be there the next day. I...
- Thu Aug 05, 2021 12:50 pm
- Forum: Thetis
- Topic: Thetis v2.8.11 - UPDATES and current issues
- Replies: 1752
- Views: 895112
Re: Thetis v2.8.11 - current issues
Don, I see the frozen panadapter problem from time to time. Not really an issue. Either waiting a few seconds or clicking the "Power" button solves the issue. I have experienced this issue over many versions of Thetis. It may be more of a Windows/System quirk than anything else. 73, George...
- Tue Jul 20, 2021 4:22 pm
- Forum: Thetis
- Topic: Thetis v2.8.11 - UPDATES and current issues
- Replies: 1752
- Views: 895112
Re: Thetis v2.8.11 - current issues
Hi Richie, I watched your video on PS problems. I have Anan 7k and Anan 8K. I see the same PS not working issue on my A8K on a regular basis. It usually occurs on mode changes. If I work CW for a while and then go to SSB PS just sits there and doesn't work. Repeatedly turning PS on and off will some...
- Tue Jun 29, 2021 12:40 pm
- Forum: Thetis
- Topic: Thetis v2.8.11 - UPDATES and current issues
- Replies: 1752
- Views: 895112
Re: Thetis v2.8.11 - current issues
Hi Richie,
Minor issue. The CW mode box is white on my GUI and the text is gray. Unless you mouse over the box the text is not readable.
73, George
W2GS
Minor issue. The CW mode box is white on my GUI and the text is gray. Unless you mouse over the box the text is not readable.
73, George
W2GS
- Sun Jan 10, 2021 7:06 pm
- Forum: Thetis
- Topic: How to use MNF
- Replies: 3
- Views: 2190
Re: How to use MNF
Thanks for the replies. Very helpful. I will play around with this some more and try it out on the bands. The old Flex tracking notch filters were a lot easier to use and implement. Despite Flex barking about them being "their" intellectual property I think it was pointed out what flex imp...
- Sat Jan 09, 2021 1:41 pm
- Forum: Thetis
- Topic: How to use MNF
- Replies: 3
- Views: 2190
How to use MNF
Searched the forum but couldn't find any information on how to use MNF. The buttons on the GUI don't work consistently and when I manage to create a MNF there isn't any attenuation of the signal. Suggestion on how to us MNFs and set them up?
73, George
W2GS
73, George
W2GS
- Mon Nov 30, 2020 3:01 pm
- Forum: Thetis
- Topic: FocusMater shuts the radio down
- Replies: 3
- Views: 1957
Re: FocusMater shuts the radio down
Hi Scott, I found the problem. Turned out to be UDP collisions/port access. I was testing a FreqEZ board/RPI to changed my antenna switching from LPT/BCD setup to using the FreqEZ board. Turns out that Thetis, DXLab's Commander and N1MM were experiencing packet collisions or fighting over port acces...
- Sat Nov 28, 2020 10:57 pm
- Forum: Thetis
- Topic: FocusMater shuts the radio down
- Replies: 3
- Views: 1957
Re: FocusMater shuts the radio down
Hi Scott, Thanks for checking. I am running the latest version of N1MM+ and I am starting FocusMaster withN1MM+ running. Like I said I will try a database reset after the contest and see if that cures the problem. I am pretty sure I worked three RTTY contests and didn't have a problem with FocusMast...
- Sat Nov 28, 2020 5:53 pm
- Forum: Thetis
- Topic: FocusMater shuts the radio down
- Replies: 3
- Views: 1957
FocusMater shuts the radio down
Been working in CQ WW CW this weekend. When I try to use FocusMaster with N1MM+ just selecting N1MM+ causes Thetis to completely shutdown (both the Setup window and the main window close). I have to restart the radio (A8K) before anything works. After restart everything works normally unless I try t...
- Fri Oct 23, 2020 12:03 pm
- Forum: Thetis
- Topic: Thetis v2.8.11 ANF button issue
- Replies: 3
- Views: 2614
Re: Thetis v2.8.11 ANF button issue
Hi Chris,
This is a strange one. I can reset the database and it will work for a while then I notice it is greyed out again. Also I can switch to WWV and it works: switch back to the hambands and it's greyed out again. Will have to play with it and see what happens.
73, George
W2GS
This is a strange one. I can reset the database and it will work for a while then I notice it is greyed out again. Also I can switch to WWV and it works: switch back to the hambands and it's greyed out again. Will have to play with it and see what happens.
73, George
W2GS
- Thu Oct 22, 2020 9:45 pm
- Forum: Thetis
- Topic: Thetis v2.8.11 ANF button issue
- Replies: 3
- Views: 2614
Thetis v2.8.11 ANF button issue
I installed the latest version of Thetis this afternoon. I am using an Anan 7000DLE MKII and an Anan 8000DLE. The ANF button does not function on either radio. Each radio has its own .xml file and is started with its own Icon and database file. On the A8K the ANF button on RX1 is green and the lette...
- Sat Feb 22, 2020 1:18 am
- Forum: Thetis
- Topic: Thetis 1/24/2020 Latency Issue
- Replies: 3
- Views: 4437
Re: Thetis 1/24/2020 Latency Issue
Hi Scott, Reloaded the 10 Feb .rbf with the 24 Dec Thetis. Semi breakin worked without a problem. In QSK there were clicks with every element sent. I went back to the pre8 .rbf and the same result; semi breakin worked no latency and QSK had clicks. I don't normally run QSK so I never noticed a probl...
- Fri Feb 21, 2020 1:23 pm
- Forum: Thetis
- Topic: Thetis 1/24/2020 Latency Issue
- Replies: 3
- Views: 4437
Thetis 1/24/2020 Latency Issue
I loaded the 24 Jan Thetis update along with the 10 Feb .rbf a couple of days ago. CW latency was bad enough that this update was unusable on either my A7K or A8K. There was also clicking with each CW element sent. I tried both QSK and semi breakin and the problems was the same. I went back to the 2...
- Thu Jan 30, 2020 1:42 pm
- Forum: Thetis
- Topic: Thetis 1/24/2020 update
- Replies: 12
- Views: 10455
Re: Thetis 1/24/2020 update
A side note on my earlier post. I went back to Thetis 12/24/19 and the v2.0 pre8 firmware and normal operation was restored. I have used this combination of Thetis and firmware for the last month and everything has worked to near perfection. I worked a CW contest and RTTY contest without any problem...
- Thu Jan 30, 2020 1:26 pm
- Forum: Thetis
- Topic: Thetis 1/24/2020 update
- Replies: 12
- Views: 10455
Thetis 1/24/2020 update
I uploaded the latest version of Thetis and the new firmware and ran into a couple of issues. I tried loading the new version of Thetis over the 12/24/2019 version and when starting Thetis the tittle block still said Thetis v2.9.9(12/24/2019). Checking MS device manager>programs I found I had to lis...
- Fri Jan 03, 2020 3:32 pm
- Forum: Thetis
- Topic: Thetis and CW Skimmer
- Replies: 33
- Views: 24007
Re: Thetis and CW Skimmer
Here are my Omni Rig settings in CWSkimmer.
73, George
W2GS
73, George
W2GS