Search found 22 matches

by N9HLL
Thu Oct 26, 2023 12:23 am
Forum: Thetis
Topic: TX Profile updates
Replies: 22
Views: 2614

Re: TX Profile updates

Richie Two things....First....Thank you SO much for what you do..It is appreciated much more than you could possibly imagine . And second....Kudos for fixing the FM strategy and allowing the user to change the passband response, While I rarely do any FM, the frequency response on these is just so ba...
by N9HLL
Mon Jan 30, 2023 1:55 am
Forum: Thetis
Topic: FM receive limiter patch for Thetis 2.9.0.6 x64
Replies: 7
Views: 2211

Re: FM receive limiter patch for Thetis 2.9.0.6 x64

Works wonderful ! I actually ventured up to 10 today and did some FM work... Thank you Warren !!

Rick (N9HLL)
by N9HLL
Fri Jan 27, 2023 11:23 pm
Forum: Thetis
Topic: Poor audio quality on 10M FM receive
Replies: 21
Views: 3340

Re: Poor audio quality on 10M FM receive

Not that it matters, But I also find the FM performance almost unuseable However, The audio levels thru the chain are WAY too high someplace, I just so seldom use it I`ve never tried to figure out where....Lowering the Master AF way down does seem to cure the distortion on receive to a managable lev...
by N9HLL
Mon Sep 12, 2022 11:33 pm
Forum: piHPSDR
Topic: Frequency Calibration
Replies: 13
Views: 6070

Re: Frequency Calibration

Scott Thank You for that link....I know Christoph had done some work with it but for the life of me I couldn`t remember the his call I will say this...on a Pi4 single receiver this has just been flawless...so far the best, most stable i`ve ever seen but i`m only running it on one of the 10E`s on pro...
by N9HLL
Sat Sep 10, 2022 12:14 am
Forum: piHPSDR
Topic: Frequency Calibration
Replies: 13
Views: 6070

Re: Frequency Calibration

Scott I built mine around the same time frame you did because I remember asking you where you got the angled base from so a few years ago....it was built on a Pi 3b I put the version 2 Software on it a couple of years ago because that V1 software was just not the best....It was stable with the V2 st...
by N9HLL
Fri Sep 09, 2022 11:43 am
Forum: piHPSDR
Topic: Frequency Calibration
Replies: 13
Views: 6070

Re: Frequency Calibration

Just a Follow up I answered My own question accidently Swapping to a Pi 4b from a 3b was not as plug and play as it should have been, suffice to say I had to start from scratch OS wise so also loaded the newest PiHpSDR And there it is...Frequency calibration right there in the Radio setup menu. I mi...
by N9HLL
Mon Sep 05, 2022 3:17 pm
Forum: piHPSDR
Topic: Frequency Calibration
Replies: 13
Views: 6070

Re: Frequency Calibration

Scott Yep E-mail sent to John, I`m just trying to cover all the bases and hitting it here also, One never knows who might be sitting in the background..LOL The Version 2 with a RP4 and cooling fans just runs so stable I really haven`t even changed anything.. Used it last weekend and it reminded my o...
by N9HLL
Mon Sep 05, 2022 2:40 pm
Forum: piHPSDR
Topic: Frequency Calibration
Replies: 13
Views: 6070

Re: Frequency Calibration

I realize this may not be the answer you want, but you might also consider buying a GPS disciplined 10MHz reference oscillator. Leo Bodnar makes a reasonably priced one. The 7000 will automatically use the signal. The 10E's will have to have their internal jumpers configured to use it. Once you hav...
by N9HLL
Mon Sep 05, 2022 1:03 pm
Forum: piHPSDR
Topic: Frequency Calibration
Replies: 13
Views: 6070

Frequency Calibration

Just thought I might toss this out here as i`m not sure how much is still being done with this. This is on a Homebrew controller running John`s V2.0.0.0-rc7 currently While I don`t use this often, it is used on a couple of different radios (7K and two different 10E`s) Obviously there is no way via t...
by N9HLL
Sat Aug 13, 2022 2:04 pm
Forum: Thetis
Topic: Quick situation update
Replies: 20
Views: 4841

Re: Quick situation update

Richie,
Good to hear all is well,
Get out and enjoy every minute you can....Life is too short.
What a beautiful place to be doing it also...

Rick (N9HLL)
by N9HLL
Wed Jul 13, 2022 11:55 am
Forum: Upgrading/Downgrading
Topic: Orion Mk III Rev 5
Replies: 2
Views: 2987

Orion Mk III Rev 5

Apparently there is a New version of the Orion board with a different FPGA and some redesign being shipped in the new 7000`s that requires special firmware. This from Tony at Anan Quote: If you have updated the firmware the radio will not work! Please find attached the correct firmware as the new ba...
by N9HLL
Thu Apr 28, 2022 10:48 pm
Forum: Thetis
Topic: Thetis v2.9.0 - Updates and Issues
Replies: 431
Views: 109526

Re: Thetis v2.9.0 - Updates and Issues

Richie, First off..THANK YOU ! for what you have done, this is just amazing work. A WANTWISH for you Is it possible to add Drive level per mode ? IE: Different Drive requirements for AM vs SSB or various digital modes It may be way more complicated than it is worth code wise but I wanted to ask. Aga...
by N9HLL
Sun Apr 04, 2021 2:08 pm
Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
Topic: IMPORTANT UPDATE/DO NOT USE: 7000DLE fan noise fix
Replies: 30
Views: 45598

Re: IMPORTANT UPDATE/DO NOT USE: 7000DLE fan noise fix

I really Hate being "That Guy" to bring up a dead 2`ish year old thread....But someone`s gotta do it... Has anyone come up with any better ideas concerning this stupid Fan......My only complaint I got spoiled running the 10E for years with no fan......Even buried under the bench I can stil...
by N9HLL
Sat Jan 30, 2021 6:04 am
Forum: Network Connections & Network Hardware
Topic: 7K Black Connection issues
Replies: 6
Views: 3901

Re: 7K Black Connection issues

Problem solved....It was a corrupt firmware issue and... I will admit that I forgot about having to rename the .rbf to "Metis"
Finally loaded perfectly all good and working fine.

Rick
by N9HLL
Fri Jan 29, 2021 6:44 pm
Forum: Network Connections & Network Hardware
Topic: 7K Black Connection issues
Replies: 6
Views: 3901

Re: 7K Black Connection issues

Have you tried the v1 Programmer? Maybe it has p1 installed? Mine shipped in June with p1 on it. While I was under the assumption that they are all shipping with P1 as of right now, You do bring a valid point to the table and its worth a look....The question still remains that it had been on both n...
by N9HLL
Fri Jan 29, 2021 12:24 pm
Forum: Network Connections & Network Hardware
Topic: 7K Black Connection issues
Replies: 6
Views: 3901

Re: 7K Black Connection issues

ea3aqr wrote:Check the switch located in the bottom part, it could be in bootloader mode


Number 5 of "things tried"
by N9HLL
Fri Jan 29, 2021 5:25 am
Forum: Network Connections & Network Hardware
Topic: 7K Black Connection issues
Replies: 6
Views: 3901

7K Black Connection issues

I hate to beat a dead horse because i`ve read through the various Network issue threads....but here goes because i`m out of ideas Brand new 7K black about 4 hours out of the box I can not get this to be found on the network What has been done so far: Unplugged perfectly working 10E (on LAN) Differen...
by N9HLL
Sun Jan 14, 2018 7:55 pm
Forum: piHPSDR
Topic: Asus Tinker Board
Replies: 18
Views: 23431

Re: Asus Tinker Board

Thanks John
Off the subject...Love the 1.2.2 on the Pi, Best yet ! Especially the analog Meter... :D

Rick (N9HLL)
by N9HLL
Wed Jan 10, 2018 12:39 am
Forum: piHPSDR
Topic: Asus Tinker Board
Replies: 18
Views: 23431

Re: Asus Tinker Board

After a little fussing, I got a Tinker board to load Pihpsdr......However I can not for the life of me get it to connect to the radio (10E with proto1) directly connected, Works over the network fine. What am I missing ? It is currently back on the Pi board for now but I thought about it after the f...
by N9HLL
Tue Dec 26, 2017 2:35 pm
Forum: PowerSDR mRX
Topic: Quick record on AM
Replies: 22
Views: 18442

Re: Quick record on AM

Well Since I started this and have not been back to it for a bit...
The DC block was the issue....Thank you Gents.....That is the beauty of the Forum, You can always learn something

Rick
N9HLL
by N9HLL
Fri Nov 24, 2017 2:31 am
Forum: PowerSDR mRX
Topic: Quick record on AM
Replies: 22
Views: 18442

Re: Quick record on AM

Mods Please delete this thread, I guess it is either a problem on my end or nobody cares if you are not in the "loop".

Thanks
by N9HLL
Fri Nov 17, 2017 5:26 am
Forum: PowerSDR mRX
Topic: Quick record on AM
Replies: 22
Views: 18442

Quick record on AM

Is it just me or is it not possible to get a good recording either with the Quick record or Wave record screen on AM ? Completely distorted no matter what I have tried.
SSB works absolutely perfect in either selection.


Any suggestions ?

Thanks Rick (N9HLL)

Go to advanced search