Diversity was enabled. Why? I never enabled diversity! Problem solved

Hi Norbert, I am using built 2024-01-26. I can run 2 receivers at 192000 without problems. Second RX is assigned to VFO B. you can change to RX2 (activate) by clicking on the spectrum. The S-meter and headphone audio are always related to the active RX. Split is working as well. Reboot, pihpsdr upd...

Hi Volker,

I just tried using the 2nd rx, but didn't get spectrum, waterfall or audio. All I got are grey and black fields below rx one. Will later try pihpsdr on M1 Mac too.

Running Saturn f/w 13 and pihpsdr build from 2024-04-03.

73, Norbert

I can confirm this behaviour!

Today I updated Thethis to version 2.10.3.6 x63 and (FW v.2.00 Protocol 2) dev_2. I now have no transmitter output power. Has anyone had such a problem? Slawomir FW v.2.00 Protocol 2) dev_2? Isn't that a firmware release for a non-G2 radio? I believe it's the fw version that can be seen on the wind...

Neutrik has everythink for a reasonable price (look for sellers): https://www.neutrik.com/de/neutrik/prod ... rm-adapter

N4QNT wrote:Good Day, I'm Seeking guidance with upgrading to the V12 and p2app to V15? for the G2.

First post:
viewtopic.php?f=48&t=4772#p26132

https://www.dropbox.com/scl/fi/r8o8iictmcb0qbaka99w7/Metis_Orion_MkII_Protocol_2_v2.2.1.rbf?rlkey=8ca3ns4y0u0mrmox8zsl2zb55&dl=0 This seems to fix a not well known bug in the hardware cw keying. Three month ago I had three MKI 7000er on my bench, my own one and two others. All units went into a ...

When using the front panel Mic Jack, even though your Mic is on TIP, and PTT pn Ring, you have to select the opposite in the "Radio" menu. Don't know why this can't be corrected in pihpsdr code! The front and back 3.5mm jacks are in parallel, but at the front tip and ring are mixed up. Ei...

Note that some people have reported that tip and ring are reversed on that rear panel balanced input so you might try swapping hot and cold (+ and -) if you are not obtaining good performance from that input with this cable. This is a note Laurance sent me: "The tip and ring connectors on the ...

No problem to change the repo. Thanks you Rick and Christoph

Run git config --global user.email "you@example.com" git config --global user.name "Your Name" Ok, I will try that tomorrow. Thank you, Rick. Used git config, but run into more problems: "...Pulling is not possible because you have unmerged files" Solution found on sta...

n1gp wrote:Run

git config --global user.email "you@example.com"
git config --global user.name "Your Name"

Ok, I will try that tomorrow. Thank you, Rick.

I tried to update pihpsdr on another G2 via remote connection and telephone call, but failed.
"git pull" came back asking me for an email address and some more annoying b/s.

How do I get that to work?

Thank you Laurence, got it updated. Did have the merge error saying please commit your changes or stash before you merge. I deleted the P2APP executable and all else went as expected. Same here :-) The updated firmware is very nice! It seems I can run 768ksps without any annoying audio glitches. Ed...

Thank you, Richie!

Hi all, I was using the 3,5mm on the front and could not get the microphone to work. I tried Thetis and the embedded pihpsdr, used mic at tip or ring, nothing. A hint from Laurence let me try the back 3,5mm and it works. Tomorrow I will check the cable to front connector (tnx Laurence). ANAN-G2 with...

Read here: viewforum.php?f=16

The piHPSDR controller V1 connected to the ANAN-G2 runs 384k samp rate without any disturbing noise on the audio signal. PIHPSDR is build 2023-09-22.

Thank you, Rick. Too many .png, didn't see the pdf on the tiny screen.

Hi Rick,

can you please point me into the right location for the manual with appendices H, I and J. You mentioned the manual on your github repo. I am shure that a few weeks ago I have seen that manual, but I didn't save it on my computer.

73, Norbert

The Antenna Control menu only works on ADC1. ADC1 can be connected to RX1 or RX2. The ADC2 has its own antenna connector, called RX2. This ADC can also be connected to either RX2 or RX1. These settings can be changed in the ADC menu.
DDC2 is RX1, DDC3 ist RX2 on my ANAN-7000 Thetis settings.

Thanks, Richie and Ernst!

No problems here and it looks very nice!

A direct ethernet connection does not work with DHCP!

Hi Paul,

could you please provide a link to that schematic?

Aivars wrote:I just share info I guess it is funny toy. No advantage over the Thetis, IMHO.

Yes, it's just fun and it works

Hi Richie,

happy new year! it's wonderful to have you back

7000DLE, f/w 2.1.18

No problem here, normal readings at tx (compared to p/s reading), zero amp at rx. Looks ok for me.

Have fun and stay save, Richie