Search found 212 matches
- Wed Mar 20, 2024 5:41 pm
- Forum: Thetis
- Topic: Multi Meters Vfo Display
- Replies: 6
- Views: 673
Re: Multi Meters Vfo Display
I can confirm this behaviour!
- Sun Mar 10, 2024 10:35 am
- Forum: G2 Operating System & Applications
- Topic: No TX output power
- Replies: 4
- Views: 195
Re: No TX output power
Today I updated Thethis to version 2.10.3.6 x63 and (FW v.2.00 Protocol 2) dev_2. I now have no transmitter output power. Has anyone had such a problem? Slawomir FW v.2.00 Protocol 2) dev_2? Isn't that a firmware release for a non-G2 radio? I believe it's the fw version that can be seen on the wind...
- Sun Feb 18, 2024 10:46 am
- Forum: G2 Operating System & Applications
- Topic: G2 distorted audio using TRS and standard mic input
- Replies: 76
- Views: 8287
Re: G2 distorted audio using TRS and standard mic input
Neutrik has everythink for a reasonable price (look for sellers): https://www.neutrik.com/de/neutrik/prod ... rm-adapter
- Sat Feb 03, 2024 6:52 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: Firmware fix for RF appearing on RX only ports
- Replies: 75
- Views: 6641
Re: Firmware fix for RF appearing on RX only ports
N4QNT wrote:Good Day, I'm Seeking guidance with upgrading to the V12 and p2app to V15? for the G2.
First post:
viewtopic.php?f=48&t=4772#p26132
- Sat Feb 03, 2024 10:59 am
- Forum: Protocol 2 Firmware (all radios)
- Topic: Firmware fix for RF appearing on RX only ports
- Replies: 75
- Views: 6641
Re: Firmware fix for RF appearing on RX only ports
https://www.dropbox.com/scl/fi/r8o8iictmcb0qbaka99w7/Metis_Orion_MkII_Protocol_2_v2.2.1.rbf?rlkey=8ca3ns4y0u0mrmox8zsl2zb55&dl=0 This seems to fix a not well known bug in the hardware cw keying. Three month ago I had three MKI 7000er on my bench, my own one and two others. All units went into a ...
- Wed Nov 01, 2023 7:08 pm
- Forum: G2 Operating System & Applications
- Topic: New G2 with display and problems
- Replies: 30
- Views: 23842
Re: New G2 with display and problems
When using the front panel Mic Jack, even though your Mic is on TIP, and PTT pn Ring, you have to select the opposite in the "Radio" menu. Don't know why this can't be corrected in pihpsdr code! The front and back 3.5mm jacks are in parallel, but at the front tip and ring are mixed up. Ei...
- Tue Oct 31, 2023 10:26 am
- Forum: G2 Operating System & Applications
- Topic: G2 distorted audio using TRS and standard mic input
- Replies: 76
- Views: 8287
Re: G2 distorted audio using TRS and standard mic input
Note that some people have reported that tip and ring are reversed on that rear panel balanced input so you might try swapping hot and cold (+ and -) if you are not obtaining good performance from that input with this cable. This is a note Laurance sent me: "The tip and ring connectors on the ...
- Wed Oct 18, 2023 5:39 pm
- Forum: G2 Operating System & Applications
- Topic: G2 PiHPSDR NOTICE
- Replies: 5
- Views: 5338
Re: G2 PiHPSDR NOTICE
No problem to change the repo. Thanks you Rick and Christoph
- Sun Oct 08, 2023 12:18 pm
- Forum: G2 Operating System & Applications
- Topic: G2 Firmware update 5/10/2023
- Replies: 14
- Views: 4141
Re: G2 Firmware update 5/10/2023
Run git config --global user.email "you@example.com" git config --global user.name "Your Name" Ok, I will try that tomorrow. Thank you, Rick. Used git config, but run into more problems: "...Pulling is not possible because you have unmerged files" Solution found on sta...
- Sat Oct 07, 2023 8:45 pm
- Forum: G2 Operating System & Applications
- Topic: G2 Firmware update 5/10/2023
- Replies: 14
- Views: 4141
Re: G2 Firmware update 5/10/2023
n1gp wrote:Run
git config --global user.email "you@example.com"
git config --global user.name "Your Name"
Ok, I will try that tomorrow. Thank you, Rick.
- Sat Oct 07, 2023 12:29 pm
- Forum: G2 Operating System & Applications
- Topic: G2 Firmware update 5/10/2023
- Replies: 14
- Views: 4141
Re: G2 Firmware update 5/10/2023
I tried to update pihpsdr on another G2 via remote connection and telephone call, but failed.
"git pull" came back asking me for an email address and some more annoying b/s.
How do I get that to work?
"git pull" came back asking me for an email address and some more annoying b/s.
How do I get that to work?
- Fri Oct 06, 2023 5:14 pm
- Forum: G2 Operating System & Applications
- Topic: G2 Firmware update 5/10/2023
- Replies: 14
- Views: 4141
Re: G2 Firmware update 5/10/2023
Thank you Laurence, got it updated. Did have the merge error saying please commit your changes or stash before you merge. I deleted the P2APP executable and all else went as expected. Same here :-) The updated firmware is very nice! It seems I can run 768ksps without any annoying audio glitches. Ed...
- Thu Oct 05, 2023 5:49 pm
- Forum: Thetis
- Topic: Thetis v2.10.2 pre-release
- Replies: 43
- Views: 6614
Re: Thetis v2.10.2 pre-release
Thank you, Richie!
- Sun Oct 01, 2023 7:22 pm
- Forum: G2 Operating System & Applications
- Topic: G2 Software and Firmware Updates
- Replies: 85
- Views: 24490
Re: G2 Software and Firmware Updates 27 Aug 2023
Hi all, I was using the 3,5mm on the front and could not get the microphone to work. I tried Thetis and the embedded pihpsdr, used mic at tip or ring, nothing. A hint from Laurence let me try the back 3,5mm and it works. Tomorrow I will check the cable to front connector (tnx Laurence). ANAN-G2 with...
- Tue Sep 26, 2023 2:36 pm
- Forum: Thetis
- Topic: Setting up G2 to run rtty
- Replies: 8
- Views: 1260
Re: Setting up G2 to run rtty
Read here: viewforum.php?f=16
- Sat Sep 23, 2023 6:03 pm
- Forum: piHPSDR
- Topic: rec audio clicking/chopping on peaks
- Replies: 57
- Views: 33133
Re: rec audio clicking/chopping on peaks
The piHPSDR controller V1 connected to the ANAN-G2 runs 384k samp rate without any disturbing noise on the audio signal. PIHPSDR is build 2023-09-22.
- Fri Sep 22, 2023 7:04 pm
- Forum: piHPSDR
- Topic: piHPSDR G2 encoder menue
- Replies: 13
- Views: 4200
Re: piHPSDR G2 encoder menue
Thank you, Rick. Too many .png, didn't see the pdf on the tiny screen.
- Fri Sep 22, 2023 6:13 pm
- Forum: piHPSDR
- Topic: piHPSDR G2 encoder menue
- Replies: 13
- Views: 4200
Re: piHPSDR G2 encoder menue
Hi Rick,
can you please point me into the right location for the manual with appendices H, I and J. You mentioned the manual on your github repo. I am shure that a few weeks ago I have seen that manual, but I didn't save it on my computer.
73, Norbert
can you please point me into the right location for the manual with appendices H, I and J. You mentioned the manual on your github repo. I am shure that a few weeks ago I have seen that manual, but I didn't save it on my computer.
73, Norbert
- Sun Apr 09, 2023 12:51 pm
- Forum: Thetis
- Topic: Select antenna for RX2
- Replies: 4
- Views: 942
Re: Select antenna for RX2
The Antenna Control menu only works on ADC1. ADC1 can be connected to RX1 or RX2. The ADC2 has its own antenna connector, called RX2. This ADC can also be connected to either RX2 or RX1. These settings can be changed in the ADC menu.
DDC2 is RX1, DDC3 ist RX2 on my ANAN-7000 Thetis settings.
DDC2 is RX1, DDC3 ist RX2 on my ANAN-7000 Thetis settings.
- Fri Mar 17, 2023 6:01 pm
- Forum: Thetis
- Topic: Thetis v2.9.0.8 - meters and then some more
- Replies: 158
- Views: 45850
Re: Thetis v2.9.0.8 - meters and then some more
Thanks, Richie and Ernst!
No problems here and it looks very nice!
No problems here and it looks very nice!
- Tue Feb 28, 2023 9:25 am
- Forum: Network Connections & Network Hardware
- Topic: Bootloader sees 200D but Thetis does not. Direct connected
- Replies: 2
- Views: 2342
Re: Bootloader sees 200D but Thetis does not. Direct connected
A direct ethernet connection does not work with DHCP!
- Thu Feb 09, 2023 5:50 pm
- Forum: Apache-specific Hardware Discussions
- Topic: ANAN 100W PA/LPF Board With PIN Diode T/R RF Switching
- Replies: 2
- Views: 946
Re: ANAN 100W PA/LPF Board With PIN Diode T/R RF Switching
Hi Paul,
could you please provide a link to that schematic?
could you please provide a link to that schematic?
- Sun Jan 15, 2023 5:09 pm
- Forum: piHPSDR
- Topic: piHPSDR on Windows
- Replies: 5
- Views: 4747
Re: piHPSDR on Windows
Aivars wrote:I just share info I guess it is funny toy. No advantage over the Thetis, IMHO.
Yes, it's just fun and it works
- Wed Jan 04, 2023 12:41 pm
- Forum: Thetis
- Topic: All the 2.9.0.6 issues
- Replies: 17
- Views: 3530
Re: All the 2.9.0.6 issues
Hi Richie,
happy new year! it's wonderful to have you back
happy new year! it's wonderful to have you back
- Fri Jul 01, 2022 12:33 pm
- Forum: Thetis
- Topic: CPU Volts and Amp meters not working V 2.9.0.6
- Replies: 10
- Views: 2702
Re: CPU Volts and Amp meters not working V 2.9.0.6
7000DLE, f/w 2.1.18
- Fri Jul 01, 2022 12:17 pm
- Forum: Thetis
- Topic: CPU Volts and Amp meters not working V 2.9.0.6
- Replies: 10
- Views: 2702
Re: CPU Volts and Amp meters not working V 2.9.0.6
No problem here, normal readings at tx (compared to p/s reading), zero amp at rx. Looks ok for me.
- Fri Jul 01, 2022 12:13 pm
- Forum: Thetis
- Topic: Quick situation update
- Replies: 20
- Views: 4844
Re: Quick situation update
Have fun and stay save, Richie
- Fri May 27, 2022 2:12 pm
- Forum: piHPSDR
- Topic: piHPSDR V1 update from Jessie
- Replies: 2
- Views: 3993
piHPSDR V1 update from Jessie
Hi! I have got a piHPSDR to play with and found very old software installed. Raspbian Jessie and piHPSDR 1.3beta on an 8 GB sd-card. I tried to update Jessie without taking the sd-card out. The upgrade to Stretch was not easy, but finally I got it. An upgrade to Buster failed due to lack of free mem...
- Sun May 08, 2022 2:17 pm
- Forum: Thetis
- Topic: Thetis Skin Installer download
- Replies: 22
- Views: 5795
Re: Thetis Skin Problem
Sorry to have to bug you for help, but I can't get the new sliders and features to show up. I uninstalled the previous version of Thetis, rebooted and installed 2.9.06. I then ran the new exe skins install file. It unpacked properly and seemed to run normally, but no luck. I subsequently deleted al...
- Thu May 05, 2022 5:58 pm
- Forum: Thetis
- Topic: Thetis v2.9.0 - Updates and Issues
- Replies: 431
- Views: 109534
Re: Thetis v2.9.0 - Updates and Issues
-WANT/WISH- WANTWISH Add spectrum peak-find "Goto" function. VFO A or B switches frequency to the strongest peak signal when: (1) the command is engaged; and (2) at least one peak blob is set within <Setup><Display>. Place function button on the GUI or at a minimum, establish a ZZxx CAT co...