Search found 16 matches

by Segrest
Sun Oct 13, 2019 2:52 pm
Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
Topic: Angelia F3 PTC ("fuse") replacement/upgrade for Protocol 2
Replies: 29
Views: 4373

Re: Angelia F3 PTC ("fuse") replacement/upgrade for Protocol 2

Hello Everyone, I finally got through the knot hole and managed to get Protocol 2 and Thetis running on my 100D. The bottom line for me was having the F3 jumper in place (by accident as it turned out) and loading the Angelia_Protocol_2_v12.1_pre1_5770 Protocol 2 firmware. The latter is not in the st...
by Segrest
Fri Oct 11, 2019 9:34 pm
Forum: Forum Problems, Help & Suggestions
Topic: How to post images?
Replies: 5
Views: 3580

Re: How to post images?

Or if your image file is on your local computer, you can simply scroll the reply editor window down a bit, click the Attachments tab and select the Add Files button. This causes a popup window to appear you select the file you want from you computer and upload it. You can then decide if you want to ...
by Segrest
Fri Oct 11, 2019 6:38 pm
Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
Topic: Angelia F3 PTC ("fuse") replacement/upgrade for Protocol 2
Replies: 29
Views: 4373

Re: Angelia F3 PTC ("fuse") replacement/upgrade for Protocol 2

Scott, Your last comments are encouraging. Can you identify the specific builds in your list of timing variants? I will clearly want to try each of them. I apologize for seeming obtuse, but I'm not sure I understand your sample rate comment. Are you suggesting the rate I use is a factor? If so, are ...
by Segrest
Fri Oct 11, 2019 6:32 pm
Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
Topic: Angelia F3 PTC ("fuse") replacement/upgrade for Protocol 2
Replies: 29
Views: 4373

Re: Angelia F3 PTC ("fuse") replacement/upgrade for Protocol 2

Ok, I overlooked the attachments tab...

Here is a close up of the bridged F3 fuse.
100D F3 Brigded.png
100D F3 Brigded.png (562.63 KiB) Viewed 1028 times


And this is the whole board is shown below.

I hope this helps...

Bob
KO2F
by Segrest
Fri Oct 11, 2019 5:23 pm
Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
Topic: Angelia F3 PTC ("fuse") replacement/upgrade for Protocol 2
Replies: 29
Views: 4373

Re: Angelia F3 PTC ("fuse") replacement/upgrade for Protocol 2

Well, my new fuses arrived in the post yesterday and I had some time to open my 100D for the first time this morning. I was shocked to discover that the prior owner of my 100D had already replaced the F3 fuse with a wire bridge. I purchased the rig more than 2 years ago and didn't recall any mention...
by Segrest
Thu Oct 10, 2019 1:51 pm
Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
Topic: Angelia F3 PTC ("fuse") replacement/upgrade for Protocol 2
Replies: 29
Views: 4373

Re: Angelia F3 PTC ("fuse") replacement/upgrade for Protocol 2

Hi Scott, Actually, I have tried the last 4 or 5 Protocol 2 versions for the 100D. I didn't have any significant issues loading the firmware or launching Thetis. But in each case, my 100D would lock up and become unresponsive within an hour or 2. In my case the rig is not in the same building as my ...
by Segrest
Thu Oct 10, 2019 12:41 pm
Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
Topic: Angelia F3 PTC ("fuse") replacement/upgrade for Protocol 2
Replies: 29
Views: 4373

Re: Angelia F3 PTC ("fuse") replacement/upgrade for Protocol 2

The only photo I have found so far is/was the one for the Angelia board on the Apache-Labs site. The resolution is poor when you zoom in to the level required, but it appears the silkscreen on the board labels the fuses pretty clearly. I have ordered the new fuse (LightFuse #1210L450SLWRL) from Digi...
by Segrest
Thu Oct 10, 2019 12:02 am
Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
Topic: Angelia F3 PTC ("fuse") replacement/upgrade for Protocol 2
Replies: 29
Views: 4373

Re: Angelia F3 PTC ("fuse") replacement/upgrade for Protocol 2

Hi Scott,

Did you get around to change the F3 fuse in your Angelia?

Did it resolve the apparent lockup problem?

Have there been adverse effects?

Bob
KO2F
by Segrest
Tue Oct 08, 2019 11:09 pm
Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
Topic: Angelia F3 PTC ("fuse") replacement/upgrade for Protocol 2
Replies: 29
Views: 4373

Re: Angelia F3 PTC ("fuse") replacement/upgrade for Protocol 2

Where can I find a picture to locate the fuse on my Angelia board?

Bob
KO2F
by Segrest
Thu Jul 18, 2019 5:16 pm
Forum: Digital Mode, Rig Control & Logging Software
Topic: Windows 10 1903 update breaks VSPE
Replies: 4
Views: 522

Re: Windows 10 1903 update breaks VSPE

It may also be worth mentioning that you must reboot your system after updating the VSPE application...

Bob
KO2F
by Segrest
Wed May 29, 2019 4:49 pm
Forum: Protocol 2 (all radios)
Topic: Angelia (ANAN-100D) Protocol 2 test pilots: please check in
Replies: 44
Views: 5710

Re: Angelia (ANAN-100D) Protocol 2 test pilots: please check in

Hi Jeff, I agree, the boot loader has proven to be very reliable. I also have an Anan-10 running on my LAN and it does seem like the loader can get confused occasionally if it is running when I am trying to update my 100D. I have had some luck with Protocol 2, v11.6, but it too seemed to lock up and...
by Segrest
Fri May 17, 2019 8:19 pm
Forum: Protocol 2 (all radios)
Topic: Angelia (ANAN-100D) Protocol 2 test pilots: please check in
Replies: 44
Views: 5710

Re: Angelia (ANAN-100D) Protocol 2 test pilots: please check in

Hello All, Well... I'm going to hat to recant my last report... I started up Thetis the next day and was once again presented with a spectrum that would not stop bouncing from a nice quiet -150 up to -20 or -40. I don't know why this is happening. It did not appear to be band or frequency specific. ...
by Segrest
Tue May 14, 2019 1:29 am
Forum: Protocol 2 (all radios)
Topic: Angelia (ANAN-100D) Protocol 2 test pilots: please check in
Replies: 44
Views: 5710

Re: Angelia (ANAN-100D) Protocol 2 test pilots: please check in

Hi Rick, I finally broke down and loaded Protocol 2 into my 100D today. The released version 12 file was a mess. The 12.1_pre2 file kept me from rolling back to Protocol 1. And the 12.1_pre2_5550 convinced me to continue running Thetis. With version 12 the noise floor was bouncing around and hoverin...
by Segrest
Wed Sep 13, 2017 3:41 pm
Forum: PowerSDR mRX
Topic: How do I record an IQ file?
Replies: 1
Views: 942

How do I record an IQ file?

Please pardon me if this is a silly question... I have used other clients that allowed me to record I/Q data so that I could replay at a later time and look at signals that may have been missed when the recording was made. The recordings are also very useful for demos and training. I seem to get a W...
by Segrest
Fri Sep 01, 2017 2:08 pm
Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
Topic: GPSDO Tutorial?
Replies: 78
Views: 26890

Re: GPSDO Tutorial?

Hello Scott,

Thank you for the correction. I should know better than post when I can't get to sleep by now... :oops:

I will try the WWV verification this evening.

Your guidance on the distribution amplifier is appreciated. I will put it on my toy list.

Bob
KO2F
by Segrest
Fri Sep 01, 2017 9:23 am
Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
Topic: GPSDO Tutorial?
Replies: 78
Views: 26890

Re: GPSDO Tutorial?

Hello Everyone, I do a lot of digital work and time accuracy is of interest. This thread has been enlightening, but there are always a couple more questions to ask... Once I connect the 10 MHz source to my Anan-100D, is there any indicator in OpenHPSDR to confirm that it is working or that the rig i...

Go to advanced search