Search found 5537 matches

by w-u-2-o
Mon Mar 25, 2024 10:29 am
Forum: Upgrading/Downgrading
Topic: Firmware Upate for G2
Replies: 1
Views: 118

Re: Firmware Upate for G2

Since updating the firmware on the G2 generally also involves updating the middleware (p2app) and often the client software as well, all of that discussion has been concentrated in this thread: viewtopic.php?f=48&t=4772
by w-u-2-o
Sun Mar 24, 2024 11:57 am
Forum: Thetis
Topic: View of GUI during TX
Replies: 2
Views: 299

Re: View of GUI during TX

The settings you are looking for are found in Setup > Display > RX1, RX2 and TX. You will primarily be concerned with the RX spectrum grid settings and the TX grid scale settings. Note that RX settings can be set individually for each band. Rather than try to describe them in detail I'd suggest just...
by w-u-2-o
Sat Mar 23, 2024 1:30 am
Forum: Thetis
Topic: No output from Thetis after Asus computer updates
Replies: 5
Views: 258

Re: No output from Thetis after Asus computer updates

It sounds like a Windows firewall problem. Try the firewall check in Thetis setup.
by w-u-2-o
Fri Mar 22, 2024 5:44 pm
Forum: Apache Labs News
Topic: ANAN-G2 Shipping Update
Replies: 255
Views: 3046294

Re: ANAN-G2 Shipping Update

No worries, Joe!

I hope you get the G2 you ordered soon.

It's unfortunate that nobody was able to answer your other question about cables.
by w-u-2-o
Fri Mar 22, 2024 5:06 pm
Forum: Apache Labs News
Topic: ANAN-G2 Shipping Update
Replies: 255
Views: 3046294

Re: ANAN-G2 Shipping Update

Mrjoe wrote:My order number is AC-4290
IS there a way to edit a post after sending it ?

Joe

Joe--I see you have two accounts. Only one per person is allowed. Please check your email.

Also...

tempsnip.png
tempsnip.png (40.94 KiB) Viewed 208 times
by w-u-2-o
Thu Mar 21, 2024 10:17 am
Forum: Protocol 2 Firmware (all radios)
Topic: Anan-7000DLE MKII Problem writing firmeware
Replies: 4
Views: 270

Re: Anan-7000DLE MKII Problem writing firmeware

It is possible that an Ethernet cable has partially failed somewhere, perhaps when moving the ANAN around. If a cable has failed in a way that allows 100mbit/s but not GigE to run then bootloader will be fine but Thetis will not. This was never a problem with P1, but with P2 running at GigE speed it...
by w-u-2-o
Thu Mar 21, 2024 10:11 am
Forum: Thetis
Topic: TCP/Cat server
Replies: 7
Views: 307

Re: TCP/Cat server

Probably if anyone had already done this they'd have posted by now. You are a test pilot!
by w-u-2-o
Wed Mar 20, 2024 10:21 pm
Forum: Thetis
Topic: TCP/Cat server
Replies: 7
Views: 307

Re: TCP/Cat server

The problem looks to be with the VSPE configuration. You can't use a TCP client device. You have to use a combination of connector and TCP server.

https://eterlogic.com/help/vspe/DeviceC ... rPage.html
https://eterlogic.com/help/vspe/DeviceT ... rPage.html
by w-u-2-o
Wed Mar 20, 2024 10:14 pm
Forum: Protocol 2 Firmware (all radios)
Topic: Anan-7000DLE MKII Problem writing firmeware
Replies: 4
Views: 270

Re: Anan-7000DLE MKII Problem writing firmeware

nir_4x1fk wrote:I switch back the firmware switch to OFF after turned the Anan OFF and ON again.

That's the wrong sequence. Power cycle AFTER any movement of the bootloader switch.

Precise directions can be found here: viewtopic.php?f=18&t=2333
by w-u-2-o
Wed Mar 20, 2024 7:06 pm
Forum: Thetis
Topic: TCP/Cat server
Replies: 7
Views: 307

Re: TCP/Cat server

In Thetis, the TCI server and TCP/IP CAT server are two different things. The bind port for the TCI/IP CAT server is what you want to put into VSPE. And you need to remember to enable the "Server Running" checkbox in Thetis. If this doesn't help you then please post screen shots of what yo...
by w-u-2-o
Tue Mar 19, 2024 10:50 am
Forum: Thetis
Topic: Passing spots to spotting window
Replies: 7
Views: 230

Re: Passing spots to spotting window

What is the logging software you are using?
by w-u-2-o
Tue Mar 19, 2024 1:19 am
Forum: Digital ("Virtual") Audio
Topic: Full VAC or Hybrid audio
Replies: 19
Views: 834

Re: Full VAC or Hybrid audio

There's nothing wrong with your HD7's. They have an impedance of 32 ohms, like many high performance headphones do. Your PC simply can't drive them effectively. If and when you get an external interface that interface should drive them just fine.
by w-u-2-o
Tue Mar 19, 2024 12:57 am
Forum: Thetis
Topic: Passing spots to spotting window
Replies: 7
Views: 230

Re: Passing spots to spotting window

Try using 127.0.0.1
by w-u-2-o
Mon Mar 18, 2024 5:22 pm
Forum: Protocol 2 Firmware (all radios)
Topic: Firmware fix for RF appearing on RX only ports
Replies: 75
Views: 6533

Re: Firmware fix for RF appearing on RX only ports

Gary_Sitton wrote:I have an early Anan 7000DLE (s# 13), so which firmware update do I use?

Go back to the first post in this topic. You use the one for "ANAN-7000/8000 MkI/II EP4CGX150F896 Cyclone IV series FPGA"
by w-u-2-o
Sun Mar 17, 2024 4:58 pm
Forum: Digital ("Virtual") Audio
Topic: Full VAC or Hybrid audio
Replies: 19
Views: 834

Re: Full VAC or Hybrid audio

Maybe I didn't explain good enough :D This is how I use Voicemeeter: Capture.JPG That way I can turn decide what audio goes in and out of Thetis and where it goes. This is particularly helpful on receive when you may wish for the audio to go to both the digi mode software (perhaps more than one digi...
by w-u-2-o
Sun Mar 17, 2024 2:20 pm
Forum: Digital ("Virtual") Audio
Topic: Full VAC or Hybrid audio
Replies: 19
Views: 834

Re: Full VAC or Hybrid audio

Oops, yeah, forgot you need some sort of virtual audio cable software for the digi mode stuff. I like VB Audio Voicemeeter. Some people still prefer the original Muzychenko VAC software. Others prefer the VB Audio cables software. VB Audio just came out with their "Matrix" software which I...
by w-u-2-o
Sun Mar 17, 2024 10:46 am
Forum: Digital ("Virtual") Audio
Topic: Full VAC or Hybrid audio
Replies: 19
Views: 834

Re: Full VAC or Hybrid audio

The UMC202HD has a simple, straightforward driver that is very easy to understand and set up and proven with Thetis cmASIO. The Revelator io24 is a more capable device that comes with a much more complex driver and a huge suite of audio software. It has not been proven with cmASIO but other Presonus...
by w-u-2-o
Sat Mar 16, 2024 1:56 pm
Forum: Network Connections & Network Hardware
Topic: How to change "APIPA" IP?
Replies: 2
Views: 306

Re: How to change "APIPA" IP?

You can't change an APIPA IP. They will automatically be assigned randomly over the range of 169.254.0.0 to 169.254.255.255. Your choices are: - APIPA assigned address. This address will be automatically set if there is no DHCP server and if no static IP is set in the ANAN. - DHCP assigned IP addres...
by w-u-2-o
Fri Mar 15, 2024 8:04 pm
Forum: Digital ("Virtual") Audio
Topic: Full VAC or Hybrid audio
Replies: 19
Views: 834

Re: Full VAC or Hybrid audio

If you don't want a headset with a boom mic that's no problem. Everyone makes a USB mic these days. Behringer, Mackie, even RØDE makes one. You can spend a few dollars, or a few hundred dollars! If you do decide to get an ASIO-capable interface I'd recommend just to get your feet wet with the UMC202...
by w-u-2-o
Fri Mar 15, 2024 3:35 pm
Forum: Digital ("Virtual") Audio
Topic: Full VAC or Hybrid audio
Replies: 19
Views: 834

Re: Full VAC or Hybrid audio

Hi WU2O, I should have said that I'm not running an An (yet, I'm looking at it) but an Hermes Lite 2, this is my first SDR radio, só lots of questions about audio and Thetis, Voice meter, etc. HL2--IMHO they did this right by leaving out the CODEC and audio interfaces on the board. I want to see if...
by w-u-2-o
Fri Mar 15, 2024 11:50 am
Forum: Digital ("Virtual") Audio
Topic: Full VAC or Hybrid audio
Replies: 19
Views: 834

Re: Full VAC or Hybrid audio

What do you mean by "hybrid"? If you use an ASIO compatible sound interface (assume you mean the Behringer U-phoria UMC series) you are still using either cmASIO or VAC. The same is true for digital modes with Voicemeeter, you can use either cmASIO or VAC. cmASIO will be the absolute lowes...
by w-u-2-o
Wed Mar 13, 2024 3:24 pm
Forum: PureSignal Operations (PowerSDR & Thetis)
Topic: Implementation of Pure Signal by Dr. Pratt in other radio
Replies: 24
Views: 1239

Re: Implementation of Pure Signal by Dr. Pratt in other radio

It's still there. Look in the comments section of their latest post.
by w-u-2-o
Wed Mar 13, 2024 11:58 am
Forum: PureSignal Operations (PowerSDR & Thetis)
Topic: Implementation of Pure Signal by Dr. Pratt in other radio
Replies: 24
Views: 1239

Re: Implementation of Pure Signal by Dr. Pratt in other radio

I put the question to Olliter on their Facebook page and they are definitely playing it cagey :|

https://www.facebook.com/Olliter
by w-u-2-o
Tue Mar 12, 2024 11:41 pm
Forum: Microphones, Speakers & Audio Hardware
Topic: Microphone/ Audio Interface Options
Replies: 72
Views: 29412

Re: Microphone/ Audio Interface Options

WT4DX wrote:Is it feasible to run a TRS cable from the line output on a Presonus Quantum 2 directly into the XLR mic input of the G2.

Feasible, but you may need an attenuator.

Why not use cmASIO?
by w-u-2-o
Tue Mar 12, 2024 8:36 pm
Forum: PureSignal Operations (PowerSDR & Thetis)
Topic: Implementation of Pure Signal by Dr. Pratt in other radio
Replies: 24
Views: 1239

Re: Implementation of Pure Signal by Dr. Pratt in other radio

It's clearly a fork of Thetis, if the web ad copy is to be believed.
by w-u-2-o
Tue Mar 12, 2024 10:34 am
Forum: PureSignal Operations (PowerSDR & Thetis)
Topic: Implementation of Pure Signal by Dr. Pratt in other radio
Replies: 24
Views: 1239

Re: Implementation of Pure Signal by Dr. Pratt in other radio

It's more than that. First, remember that "the radio" is primarily contained in software element. The hardware element is little more than the front end and the first IF conversion. That means that any SDR that provides an appropriate feedback path and utilizes Thetis (or even PowerSDR mRX...
by w-u-2-o
Sat Mar 09, 2024 11:04 pm
Forum: Macro & MIDI Controller Software, Hardware & Scripts
Topic: VSPE, which is a good one to download
Replies: 2
Views: 223

Re: VSPE, which is a good one to download

If you are connecting a tuner (or any hardware device) to the PC using RS232 serial communications and want it to communicate with Thetis, no "VSPE" is necessary. Merely assign the correct COM port in Thetis (Setup > Serial/Network/Midi/CAT > Serial). If you need to make a connection betwe...
by w-u-2-o
Sat Mar 09, 2024 5:43 pm
Forum: Apache-specific Hardware Discussions
Topic: Is it worth upgrading from early 100D/200D rigs to latest Anan hardware?
Replies: 4
Views: 236

Re: Is it worth upgrading from early 100D/200D rigs to latest Anan hardware?

Some additional thoughts: The newer hardware has a more effective thermal design. If the hardware is run at 100W all the time that may or may not be something of interest. That said, on the older 100 and 200 series units, the simple expedient of getting a small fan to blow across the top of the chas...

Go to advanced search