Search found 5541 matches
- Fri Mar 29, 2024 11:44 am
- Forum: Digital ("Virtual") Audio
- Topic: How to UMC204HD>Voicemeeter>LightHost>Thetis
- Replies: 5
- Views: 194
Re: How to UMC204HD>Voicemeeter>LightHost>Thetis
This is probably going to do more harm than good :D I use Voicemeeter Potato strictly as a patch bay between the audio interface (Presonus Studio 192 Mobile), Thetis (via cmASIO), digi mode software and Reaper (DAW). All mixing and routing is done in Reaper. Mic's and speakers are plugged into the P...
- Thu Mar 28, 2024 1:56 pm
- Forum: G2 Operating System & Applications
- Topic: G2 with face now using Thetis.
- Replies: 12
- Views: 3085
Re: G2 with face now using Thetis.
Kj6gea Can I use G2 face/screen model without internet as stand alone like my Flex 6600M Joe Thanks No internet is required to use any openHPSDR radio, from the original Hermes to the G2, plus related hardware like the Hermes Lite or TRX Duo. That said, perhaps you meant "without an external P...
- Wed Mar 27, 2024 7:14 pm
- Forum: Digital ("Virtual") Audio
- Topic: How to UMC204HD>Voicemeeter>LightHost>Thetis
- Replies: 5
- Views: 194
Re: How to UMC204HD>Voicemeeter>LightHost>Thetis
Hi, does anyone use the Behringer U-Phoria UMC204HD together with Voicemeeter Banana and LightHost with Reaper VST plugins and Thetis. I do this, not with LightHost, but instead with the full installation of the Reaper DAW. It's the same thing, though. In order to familiarize myself a little with t...
- Wed Mar 27, 2024 6:50 pm
- Forum: PC's & Homebrew Hardware
- Topic: PC Build: GPU
- Replies: 2
- Views: 130
Re: PC Build: GPU
The GPU needs to support DirectX 12 but that is no problem for probably any card that's been made for the last five (ten?) years. Thetis requires very little in the way of GPU performance. It's all very simple 2D graphics. Certainly you do not need a card that supports a refresh rate of more than 60...
- Mon Mar 25, 2024 10:29 am
- Forum: Upgrading/Downgrading
- Topic: Firmware Upate for G2
- Replies: 1
- Views: 178
Re: Firmware Upate for G2
Since updating the firmware on the G2 generally also involves updating the middleware (p2app) and often the client software as well, all of that discussion has been concentrated in this thread: viewtopic.php?f=48&t=4772
- Sun Mar 24, 2024 11:57 am
- Forum: Thetis
- Topic: View of GUI during TX
- Replies: 2
- Views: 326
Re: View of GUI during TX
The settings you are looking for are found in Setup > Display > RX1, RX2 and TX. You will primarily be concerned with the RX spectrum grid settings and the TX grid scale settings. Note that RX settings can be set individually for each band. Rather than try to describe them in detail I'd suggest just...
- Sat Mar 23, 2024 10:58 am
- Forum: Thetis
- Topic: No output from Thetis after Asus computer updates
- Replies: 5
- Views: 287
- Sat Mar 23, 2024 1:30 am
- Forum: Thetis
- Topic: No output from Thetis after Asus computer updates
- Replies: 5
- Views: 287
Re: No output from Thetis after Asus computer updates
It sounds like a Windows firewall problem. Try the firewall check in Thetis setup.
- Fri Mar 22, 2024 5:44 pm
- Forum: Apache Labs News
- Topic: ANAN-G2 Shipping Update
- Replies: 259
- Views: 3051443
Re: ANAN-G2 Shipping Update
No worries, Joe!
I hope you get the G2 you ordered soon.
It's unfortunate that nobody was able to answer your other question about cables.
I hope you get the G2 you ordered soon.
It's unfortunate that nobody was able to answer your other question about cables.
- Fri Mar 22, 2024 5:06 pm
- Forum: Apache Labs News
- Topic: ANAN-G2 Shipping Update
- Replies: 259
- Views: 3051443
Re: ANAN-G2 Shipping Update
Mrjoe wrote:My order number is AC-4290
IS there a way to edit a post after sending it ?
Joe
Joe--I see you have two accounts. Only one per person is allowed. Please check your email.
Also...
- Thu Mar 21, 2024 10:17 am
- Forum: Protocol 2 Firmware (all radios)
- Topic: Anan-7000DLE MKII Problem writing firmeware
- Replies: 4
- Views: 330
Re: Anan-7000DLE MKII Problem writing firmeware
It is possible that an Ethernet cable has partially failed somewhere, perhaps when moving the ANAN around. If a cable has failed in a way that allows 100mbit/s but not GigE to run then bootloader will be fine but Thetis will not. This was never a problem with P1, but with P2 running at GigE speed it...
- Thu Mar 21, 2024 10:11 am
- Forum: Thetis
- Topic: TCP/Cat server
- Replies: 7
- Views: 324
Re: TCP/Cat server
Probably if anyone had already done this they'd have posted by now. You are a test pilot!
- Wed Mar 20, 2024 10:21 pm
- Forum: Thetis
- Topic: TCP/Cat server
- Replies: 7
- Views: 324
Re: TCP/Cat server
The problem looks to be with the VSPE configuration. You can't use a TCP client device. You have to use a combination of connector and TCP server.
https://eterlogic.com/help/vspe/DeviceC ... rPage.html
https://eterlogic.com/help/vspe/DeviceT ... rPage.html
https://eterlogic.com/help/vspe/DeviceC ... rPage.html
https://eterlogic.com/help/vspe/DeviceT ... rPage.html
- Wed Mar 20, 2024 10:14 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: Anan-7000DLE MKII Problem writing firmeware
- Replies: 4
- Views: 330
Re: Anan-7000DLE MKII Problem writing firmeware
nir_4x1fk wrote:I switch back the firmware switch to OFF after turned the Anan OFF and ON again.
That's the wrong sequence. Power cycle AFTER any movement of the bootloader switch.
Precise directions can be found here: viewtopic.php?f=18&t=2333
- Wed Mar 20, 2024 7:06 pm
- Forum: Thetis
- Topic: TCP/Cat server
- Replies: 7
- Views: 324
Re: TCP/Cat server
In Thetis, the TCI server and TCP/IP CAT server are two different things. The bind port for the TCI/IP CAT server is what you want to put into VSPE. And you need to remember to enable the "Server Running" checkbox in Thetis. If this doesn't help you then please post screen shots of what yo...
- Tue Mar 19, 2024 10:50 am
- Forum: Thetis
- Topic: Passing spots to spotting window
- Replies: 7
- Views: 243
Re: Passing spots to spotting window
What is the logging software you are using?
- Tue Mar 19, 2024 1:19 am
- Forum: Digital ("Virtual") Audio
- Topic: Full VAC or Hybrid audio
- Replies: 19
- Views: 868
Re: Full VAC or Hybrid audio
There's nothing wrong with your HD7's. They have an impedance of 32 ohms, like many high performance headphones do. Your PC simply can't drive them effectively. If and when you get an external interface that interface should drive them just fine.
- Tue Mar 19, 2024 12:57 am
- Forum: Thetis
- Topic: Passing spots to spotting window
- Replies: 7
- Views: 243
Re: Passing spots to spotting window
Try using 127.0.0.1
- Mon Mar 18, 2024 5:22 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: Firmware fix for RF appearing on RX only ports
- Replies: 75
- Views: 6641
Re: Firmware fix for RF appearing on RX only ports
Gary_Sitton wrote:I have an early Anan 7000DLE (s# 13), so which firmware update do I use?
Go back to the first post in this topic. You use the one for "ANAN-7000/8000 MkI/II EP4CGX150F896 Cyclone IV series FPGA"
- Sun Mar 17, 2024 4:58 pm
- Forum: Digital ("Virtual") Audio
- Topic: Full VAC or Hybrid audio
- Replies: 19
- Views: 868
Re: Full VAC or Hybrid audio
Maybe I didn't explain good enough :D This is how I use Voicemeeter: Capture.JPG That way I can turn decide what audio goes in and out of Thetis and where it goes. This is particularly helpful on receive when you may wish for the audio to go to both the digi mode software (perhaps more than one digi...
- Sun Mar 17, 2024 2:20 pm
- Forum: Digital ("Virtual") Audio
- Topic: Full VAC or Hybrid audio
- Replies: 19
- Views: 868
Re: Full VAC or Hybrid audio
Oops, yeah, forgot you need some sort of virtual audio cable software for the digi mode stuff. I like VB Audio Voicemeeter. Some people still prefer the original Muzychenko VAC software. Others prefer the VB Audio cables software. VB Audio just came out with their "Matrix" software which I...
- Sun Mar 17, 2024 10:46 am
- Forum: Digital ("Virtual") Audio
- Topic: Full VAC or Hybrid audio
- Replies: 19
- Views: 868
Re: Full VAC or Hybrid audio
The UMC202HD has a simple, straightforward driver that is very easy to understand and set up and proven with Thetis cmASIO. The Revelator io24 is a more capable device that comes with a much more complex driver and a huge suite of audio software. It has not been proven with cmASIO but other Presonus...
- Sat Mar 16, 2024 1:56 pm
- Forum: Network Connections & Network Hardware
- Topic: How to change "APIPA" IP?
- Replies: 2
- Views: 348
Re: How to change "APIPA" IP?
You can't change an APIPA IP. They will automatically be assigned randomly over the range of 169.254.0.0 to 169.254.255.255. Your choices are: - APIPA assigned address. This address will be automatically set if there is no DHCP server and if no static IP is set in the ANAN. - DHCP assigned IP addres...
- Fri Mar 15, 2024 8:04 pm
- Forum: Digital ("Virtual") Audio
- Topic: Full VAC or Hybrid audio
- Replies: 19
- Views: 868
Re: Full VAC or Hybrid audio
If you don't want a headset with a boom mic that's no problem. Everyone makes a USB mic these days. Behringer, Mackie, even RØDE makes one. You can spend a few dollars, or a few hundred dollars! If you do decide to get an ASIO-capable interface I'd recommend just to get your feet wet with the UMC202...
- Fri Mar 15, 2024 3:35 pm
- Forum: Digital ("Virtual") Audio
- Topic: Full VAC or Hybrid audio
- Replies: 19
- Views: 868
Re: Full VAC or Hybrid audio
Hi WU2O, I should have said that I'm not running an An (yet, I'm looking at it) but an Hermes Lite 2, this is my first SDR radio, só lots of questions about audio and Thetis, Voice meter, etc. HL2--IMHO they did this right by leaving out the CODEC and audio interfaces on the board. I want to see if...
- Fri Mar 15, 2024 11:50 am
- Forum: Digital ("Virtual") Audio
- Topic: Full VAC or Hybrid audio
- Replies: 19
- Views: 868
Re: Full VAC or Hybrid audio
What do you mean by "hybrid"? If you use an ASIO compatible sound interface (assume you mean the Behringer U-phoria UMC series) you are still using either cmASIO or VAC. The same is true for digital modes with Voicemeeter, you can use either cmASIO or VAC. cmASIO will be the absolute lowes...
- Thu Mar 14, 2024 11:13 am
- Forum: PureSignal Operations (PowerSDR & Thetis)
- Topic: Implementation of Pure Signal by Dr. Pratt in other radio
- Replies: 24
- Views: 1282
- Wed Mar 13, 2024 3:24 pm
- Forum: PureSignal Operations (PowerSDR & Thetis)
- Topic: Implementation of Pure Signal by Dr. Pratt in other radio
- Replies: 24
- Views: 1282
Re: Implementation of Pure Signal by Dr. Pratt in other radio
It's still there. Look in the comments section of their latest post.
- Wed Mar 13, 2024 11:58 am
- Forum: PureSignal Operations (PowerSDR & Thetis)
- Topic: Implementation of Pure Signal by Dr. Pratt in other radio
- Replies: 24
- Views: 1282
Re: Implementation of Pure Signal by Dr. Pratt in other radio
I put the question to Olliter on their Facebook page and they are definitely playing it cagey
https://www.facebook.com/Olliter
![Neutral :|](./images/smilies/icon_neutral.gif)
https://www.facebook.com/Olliter
- Tue Mar 12, 2024 11:41 pm
- Forum: Microphones, Speakers & Audio Hardware
- Topic: Microphone/ Audio Interface Options
- Replies: 72
- Views: 30091
Re: Microphone/ Audio Interface Options
WT4DX wrote:Is it feasible to run a TRS cable from the line output on a Presonus Quantum 2 directly into the XLR mic input of the G2.
Feasible, but you may need an attenuator.
Why not use cmASIO?