That's not an automatic ID feature. It's an ID reminder feature. Nothing is played over the air.

See these links:

viewtopic.php?f=32&t=4462

viewtopic.php?f=32&t=4972

Which model ANAN is the firmware for?

Thanks Scott, If I can run all digital on the same line that aoulçd be good (I suppose that only one program at the time, if I want to run Winrabler for RTTY, I must close WSJT-x or JTDX or MSHV, and the opposite also). From a purely audio perspective all these app's can run at the same time on the...

So for Winwrabler, I just choose the Input as Voicemeeter AUX Input And for output Voicemeeter Out B3 Then Send B1 to B3 and B3 to B1 Correct. One mistake. If you wish to use strip B3 "Voicemeeter VAIO3" for Winwarbler then... For input choose Voicemeeter VAIO3 Input. The rest is correct....

Nuno, Now that you've apparently got WSJT-X working, the rest is easy. Voicemeeter will happily allow more than one application to share a channel strip if they are not using ASIO. Since none of the digi mode app's use ASIO, you can simply set them all up like WSJT-X and run them all on channel stri...

So the problem had nothing to do with the G2 itself. It's seems simply a coincidence. It was difficult to imagine how running at 12.9V could cause any problems.

Do you know if the unit is running Protocol 1 or Protocol 2 firmware? Knowing the answer to that will help determine whether you proceed with Programmer or Bootloader.

Looks pretty good so far. First, a couple of clean up items: - Remove the input selection assignments on Voicemeeter channel strips A1, A2 and A3 (the first three strips). We'll come back to that later. - Remove all of the assignments on channel strip B3, marked "Voicemeeter VAIO3". Now fo...

That it's an HL2 does not matter. Let's take this one step at a time. Part of the problem is that Voicemeeter naming conventions can be confusing. Step one, get audio moving out of Thetis, through Voicemeeter, to the UMC202. - Your choice of UMC ASIO for Hardware Out A1 is correct. - Set Thetis to u...

There's a lot of setup screens, that's for sure! Don't forget that you can almost always find the appropriate setup tab by right clicking on the control in question. This definitely works with AGC, give it a try! The new "Finder" menu is also helpful. See what you get when you put in "...

It's not entirely clear from your post, but: - Did the Pi crash during this power supply event? or - When you saw the voltage had dropped and you "completely shut down the station within a few seconds" did you follow the proper shutdown procedure so that the Pi was not just crashed off? Be...

From a user standpoint, and using Thetis as the software, the only practical advantage the G2 has over the 7000 is that the G2 has a complete and fully stable implementation of Gigabit Ethernet. The RF and DSP architectures are otherwise essentially identical, with differences only measurable on a t...

2.10.3.6 (1/28/24) dev_2, correct? There is no user adjustment for the red line. Warren, Richie and I proved that it is mathematically correct, regardless of how it may look to some. IMHO it is spot on. Indeed, Richie's algorithm for calculating it is incredibly elegant, working for nearly any set o...

I still don’t fully understand pure signal I read it but have not seen it -I guess it’s like a good clean compression of your audio PureSignal is not an audio processing facility. It is not a voice compressor. It is a method for significantly reducing intermodulation distortion (IMD) in your signal...

My G-2 screen model on pre order I have Question. PowerSDR /Pure-Signal is this available using my G-2 as stand alone with out using WIFi or computer Yes. The piHPSDR client should come preloaded on the G2 and it supports PureSignal. My Yaesu FTDX 101D had new feature like pure-signal it was a real...

Thanks for posting that, David!

I can't understand why Apache doesn't post those things here in the forum

Bob--your post here and your other post that I answered represent a unique set of problems that don't fit neatly into either of the topics you tailed onto. Don't be shy! :) Please start your very own new topic in the Digital Virtual Audio sub-forum (https://community.apache-labs.com/viewforum.php?f=...

Bob, It seems there are at least two things going on here. First is the lack of the expected registry keys. This might affect dropout performance but not "hooting and feedback". You might need some Windows OS repairs. Try running the following commands from an Command Prompt (Admin) window...

You attributed quotes to me that I did not make. I am such an idiot. You have my abject apology. What happened was when I went to quote your post and respond to it I accidentally clicked the edit button instead of the quote button and blithely started typing. And, because I am a moderator, the syst...

Order Number: AC-4290 Joseph Conover I ordered G2 Screen model 14 days ago with $1000 down payment (PayPal)was told 3-4 week delivery time that was two weeks ago - Should I cancel my order or wait Joe KA2ZSD I would recommend waiting. My understanding is that Paypal disputes can be opened up any ti...

AFAIK baud rate does not matter with virtual cables.

Great catch!

It would probably be best to use the default ports.

You've got quite a train wreck going on there! Everything is interfering with everything else because you are using the same ports everywhere. You can't use the same port for both TCI and TCP. Make them different in Thetis. Adjust your other software and hardware as necessary to match your selection...

This is probably going to do more harm than good :D I use Voicemeeter Potato strictly as a patch bay between the audio interface (Presonus Studio 192 Mobile), Thetis (via cmASIO), digi mode software and Reaper (DAW). All mixing and routing is done in Reaper. Mic's and speakers are plugged into the P...

Kj6gea Can I use G2 face/screen model without internet as stand alone like my Flex 6600M Joe Thanks No internet is required to use any openHPSDR radio, from the original Hermes to the G2, plus related hardware like the Hermes Lite or TRX Duo. That said, perhaps you meant "without an external P...

Hi, does anyone use the Behringer U-Phoria UMC204HD together with Voicemeeter Banana and LightHost with Reaper VST plugins and Thetis. I do this, not with LightHost, but instead with the full installation of the Reaper DAW. It's the same thing, though. In order to familiarize myself a little with t...

The GPU needs to support DirectX 12 but that is no problem for probably any card that's been made for the last five (ten?) years. Thetis requires very little in the way of GPU performance. It's all very simple 2D graphics. Certainly you do not need a card that supports a refresh rate of more than 60...

Since updating the firmware on the G2 generally also involves updating the middleware (p2app) and often the client software as well, all of that discussion has been concentrated in this thread: viewtopic.php?f=48&t=4772