I'm using cmASIO now for a week with the use of VOX. It works realy perfect. The tx to rx switching is high speed. When there is a small pause in my talking, you can hear if there is some other activity on the frequency. For example when doubling with another station. This is a nice achievement for ...

I think you will like the Behringer results much better. James WD5GWY Hello James, I just received the UMC202HD This setup with UMC works good in combination with Thetis and cmASIO. cmASIO icon in Thetis is green, and PureSignal works, VAC1 and VAC2 are not used. I only need to start tuning the Blo...

Unfortunately, seems the Realtek chip limited due to too high minimum alloweable buffer size. And can not meet the basic requirements of cmASIO. You will not know that for sure, until you run hostsample.exe to get hard results from the actual Realtek ASIO driver on your machine. Hello Bryan You pro...

Hi Chiron, There's no need to run Voicemeeter in your case, so long as the Realtek ASIO driver can meet the basic requirements of cmASIO. Take a look at the cmASIO guide in the Windows start menu under OpenHPSDR and begin there. If you don't know the precise name of the Realtek ASIO driver, you can...

I'm using Protocol v2 with 7000DLE MK2. My pc is a laptop with an Realtek audio chip onboard. There is no ASIO driver on the laptop. So I searched and found an Realtek ASIO driver on the Dell website. The Realtek ASIO driver can be configured via the Voicemeeter System settings/ Options page, when t...

Hi Vin, It would be interesting to see how it runs on your ANAN. It runs fine on my Cyclone V based Orion2 board: https://www.dropbox.com/scl/fi/xghgifzswfwio4zkf9j0g/Orion_MkIII_P2_CV_21.9_100T.rbf?rlkey=xmpm7v1ndjmslwxezjg01370a&dl=0 BTW, could you let me know which P2 gateware images you hav...

Can it been solved by using (going back to) 2.9.0.5 and do the calibration and save it. Then go to version 2.9.0.6 again? yah probably, but have not tried myself Hello Richie, I can confirm that using your latest master branch 2.9.0.6 and compile it, the generated 2.9.0.7 does store the calibrated ...

Just to add, if you performed a level calibration with 2.9.0.5 or versions before then that value will be saved in your db and used fine. However, if you run a calibration with 2.9.0.6 unfortunately the value is not saved. This was fixed back in may/june 22, but I didn't get around to releasing a v...

Yep, tci can support bi-directional audio at various sample rates, as well as I/Q stream. Of course it needs implement/integrating with the audio/stream system of Thetis, that is some way down the road. Unfortunately not much supports TCI and from what I have seen not much supports CAT over TCP/IP....

Hello Richie, I appreciate your good work on Thetis. It works very great. It is fast, low latency, stable, nice new features etc. Also RC5 works like a charm. Your large amount of video's do help to use (for me) new features. Some features are there already for a long time, but I never used it. And ...

@ramdor Richie PureSignal usage is great. For the anan with 16 bit ADC is the default value for SetPk = 0.4072 When switching over to hermesLite2 with has a 12 bit ADC the SetPk = 0.4072 is not the propper value. It must be something like 0.238 In order to get 'PureSignal correction' to work the Set...