Yes, the 7000DLE MKII Black Edition are also in production now.

Apache Labs Support

Hello Tom,

Andromeda shipping commences end of February 2021,

Regards,

Apache Labs Support

shipping updates: We have received the Assembled PCBs from our CM this Friday and our team is now working on the assembly of the 7000DLEs and the V2 controllers, the factory will remain open with limited staff through the vacation except for 25/26th/31st of December and the 1st of January 2021. Our ...

shipping updates: We have received the Assembled PCBs from our CM this Friday and our team is now working on the assembly of the 7000DLEs and the V2 controllers, the factory will remain open with limited staff through the vacation except for 25/26th/31st of December and the 1st of January 2021. Our ...

Hi All, Here are some updates on shipping timelines: 1. V2 Controllers commence shipping from the 16th of December 2. ANAN-7000DLE MKII orders are expected to ship from the 21/22nd of December 3. Andromeda orders should commence shipping in Mid February component lead time have exponentially increas...

This Model was designed on community feedback and a subsequent group poll, we are currently taking expressions of interest in this model, however, so far we have not received the requisite numbers required to proceed into production

Hi Eric,

It seems being in the middle of a Pandemic has affected timelines with most businesses, we just heard back from the CM who is shipping the enclosures to us this week, assuming a ship time of a week, we should commence shipments in 2 weeks,

Hope this helps,

Regards,

Apache Labs Support

A few quick updates on the V2 controller, we have an ETD of early September delivery of the enclosures and electronics from our Contract Manufacturer, I would like to thank everyone for their patience. John, G0ORX and Christoph, DL1YCF have been churning out updates and a recent change in the GUI is...

Hello Mike, I believe a reply has been send to K5UA informing him of the order ship date, We are shipping radios albeit at a lower volume due to the Social distancing at work requirement and the stage-4 lock down in Melbourne, Luckily we just finished a production run and now have enough stock of as...

The 10th GEN NUC does support Dual Channel DDR4, NVMe, USB 3.0 v2 and Thunderbolt 3.

We decided on the NUC after trying out several other platforms, the decision was based on the combination of Computing Power, RFI and overall stability of the platform. The NUC form factor is very compact, uses a SoC rather than a CPU/Chipset (this combination which require several high speed buses ...

Fantastic to see so many home brewers interested in the project, I am happy to share my modified front panel design file, and just so you have a fair estimate as to the costs see below: Please be aware that just the encoder costs (6 x Dual + Tuning) for the front panel is $125 plus the cost of parts...

Hello Erik,

The enclosures have been delayed by our sheet metal enclosure provider, we are looking at about 4-6 weeks before we can commence shipments.

Apologies for the delay.

Laurence, Doug, Kjell and myself have been working on Andromeda for a while now and most specs are now locked. The front panel implementation by Laurence & Kjell is in my opinion fantastic, the control layout is very ergonomic and all buttons/Encoders (Except for the tuning knob) can be reassign...

Hi Scott, Good to hear from you, please see inline below: So this looks to use the Orion MKII as is, not a new board, correct? Correct, we aim to keep all current/new rigs on the Orion MKII platform, the board performance has been maxed out using the current chips available and does not make sense t...

The ANAN-6000DLE is our new addition to the Black Edition Radios, this Radio comes in a miniature extruded Aluminum packaging much smaller that the 7000DLE MKII. Based on the Orion MKII Platform, this rig boasts of over 103dB DR, Dual ADC receivers for Diversity operation, Large FPGA, 16 Bit Tx chai...

Hi Tom,

We have received your emails and replied to all of them, we will send the paypal invoice to you once your order is ready,

Regards,

Apache Labs Support

Hi Ruben,

We have received and replied to several of your emails over the past few weeks, it seems that your ISP is blocking us,

We are happy to ship the box to you, however, since the volumetric weight is 6.5Kgs the shipping cost might be prohibitive,

Regards,

Apache Labs Support

Dear Friends, We are open for business and fulfilling orders, Based on advice/directions from the State of Victoria; we have set up multiple RF Labs including assembly capability so that each engineer can work in isolation and safety. Our Melbourne, Australia operations is fully functional and radio...

Apologies, we overlooked mentioning that the PCB for the controller has been designed by Kjell Karlsen, LA2NI.

For those looking for bare PCBs they will be available shortly.

Regards,

Apache Labs Support

https://apache-labs.com/al-products/1054/Controller-V2.html Introducing the V2 Controller for the ANAN/OpenHPSDR Radios V2 runs PiHPSDR developed by John Melton, G0ORX, Christoph van Wüllen, DL1YCF has added several features such as PureSignal, Diversity capability, CW enhancements, MAC OS support &...

Try here:

https://qrznow.com/new-controller-for-a ... an-radios/

Here is a link to the Controller v2 prototype: https://scontent.fmel2-1.fna.fbcdn.net/v/t1.0-9/89731608_3675056552567190_4084671240327921664_o.jpg?_nc_cat=106&_nc_sid=8024bb&_nc_ohc=i19mtCSmFmwAX_fJmqO&_nc_ht=scontent.fmel2-1.fna&oh=ef2d9454847c3c0a7690ef091465c851&oe=5E910272 **...

Hi Dave,

We have shipped several to HRO last week, your order should be fulfilled next week,

Regards,

Apache Labs Support

General----H/W Select Tab ensure that you have selected the ANAN-7000DLE and Alex check box is checked.

Regards,

Apache Labs Support

This is an isolated problem in two units that both Doug and the factory are aware of, we have not seen this in any other units so seems like an isolated problem. Like all Manufacturers we are also having issues related to the supply chain due to the shutdown in China, HRO should have some units in s...

Hi Tony,

we have emailed you an invoice, if you would like to use the website the free shipping option has now been fixed.

Regards,

Apache Labs Support

Hi Scott, As I mentioned there are significant changes to the LPF, SWR/Directional coupler design. The 200W PA has been tweaked as well. There is an internal low noise DC-DC converter for the 12v rail. I would recommend using Meanwell HEP-600-48, its completely silent and rugged. If fan noise does n...

Hi Christoph,

Many thanks for your effort and the amazing additions to Pihpsdr, I am running your latest commit and it works really well!

73,
Abhi

Hi Scott/Volker/Tony and all, These are the changes incorporated into the MKII compared to the previous model: 1. Incorporates the Orion MKII rev5.2 with the Tx attenuator (please note that all 8000DLEs shipped in the last few months also incorporate the same revision of the Orion MKII) 2. Use of 48...