Search found 57 matches
- Tue Mar 12, 2024 8:08 pm
- Forum: Microphones, Speakers & Audio Hardware
- Topic: Microphone/ Audio Interface Options
- Replies: 74
- Views: 46191
Re: Microphone/ Audio Interface Options
I just threw out my M-audio AIR box. It was suffering MAJOR USB data jitter, and replaced it with a UA Volt #1. Best DAC I have ever tried with ridiculously low latency.
- Sat Dec 30, 2023 7:16 pm
- Forum: Thetis
- Topic: Transmit Record ability lost (since fixed)
- Replies: 14
- Views: 2702
Re: Transmit Record ability lost
How cool is that! MIC Audio pertaining and including VAC audio IN ya? Will test later tonight when back in shack.
- Sat Dec 30, 2023 12:53 am
- Forum: Thetis
- Topic: Transmit Record ability lost (since fixed)
- Replies: 14
- Views: 2702
Re: Transmit Record ability lost
Thanks for the reply, however I believe you misinterpreted what I'm getting at. There was a version not too long ago within the past several months that I was using, I don't believe it was one of Richie's but perhaps it could have been, that allowed me to record myself the same way I can record othe...
- Thu Dec 28, 2023 8:01 pm
- Forum: Thetis
- Topic: Transmit Record ability lost (since fixed)
- Replies: 14
- Views: 2702
Transmit Record ability lost (since fixed)
There was a build of thetis, perhaps it was a fork one of you made, that fixed the record on transmit when using VAC. Do any of you still have the source for this function? Not sure who fixed it. Thx
- Thu Jul 27, 2023 4:15 pm
- Forum: Thetis
- Topic: Thetis 2.10.0 Released (G2 users take note!)
- Replies: 48
- Views: 11017
Re: Thetis 2.10.0 Released (G2 users take note!)
Ya Phil, we have observed the same. I think it's conclusive that 0.10 has some DB recall and writing issues unfortunately. I'm on. 0.31 of G7KLJ branch. I can post an installer if one is not found on the site anymore.
- Wed Jul 26, 2023 7:56 pm
- Forum: Thetis
- Topic: Thetis 2.10.0 Released (G2 users take note!)
- Replies: 48
- Views: 11017
Re: Thetis 2.10.0 Released (G2 users take note!)
I've come to find that 2.10.0 is not writing to database upon apply. I can save various audio tab settings, DSP settings, close thetis and reboot, and they are all back to default again. I have uninstalled, cleaned out the appdata remnants, reinstalled, and can repeat this issue. Any one else notice...
- Thu Jul 13, 2023 6:15 pm
- Forum: Thetis
- Topic: Thetis v2.9.0.6 SSB Filters 2.1kHz and wider are ringing
- Replies: 11
- Views: 2670
Re: Thetis v2.9.0.6 SSB Filters 2.1kHz and wider are ringing
Flip your low-latency toggle to phase-linear and all your ringing will disappear.
- Wed Mar 01, 2023 11:12 pm
- Forum: Thetis
- Topic: What does it mean that OpenHPSDR and Thetis is Open Source?
- Replies: 7
- Views: 2090
Re: What does it mean that OpenHPSDR and Thetis is Open Source?
Maximum gratitude from the radio free west coast.
- Fri Jan 20, 2023 6:12 pm
- Forum: Microphones, Speakers & Audio Hardware
- Topic: "Unlearning" VAC (reconfiguring audio set-up)
- Replies: 10
- Views: 7443
Re: "Unlearning" VAC (reconfiguring audio set-up)
Obligatory knowledge drop: Switch DSP settings from "Low Latency" to "Phase Linear" and I suspect you will appreciate the quality boost. To the naysayers, I've already examined before and after in Adobe Audition and there most certainly is a quality boost by applying the above.
- Fri Oct 28, 2022 6:09 pm
- Forum: Thetis
- Topic: TX-to-RX "noise burst" display artifact explained!
- Replies: 7
- Views: 1794
Re: TX-to-RX "noise burst" display artifact explained!
This is only an issue because people don't like to see it in the waterfall right? With no actual audio artifacts or transmission anomalies I suppose I'll continue on not giving it any concern.
- Tue Aug 30, 2022 11:31 pm
- Forum: Thetis
- Topic: Frequncy Calibration / random change
- Replies: 12
- Views: 3635
Re: Frequncy Calibration / random change
Curious, if you left the calibration at 1.0, does it persist in changing? If so, by how much?
- Thu Jul 28, 2022 9:23 pm
- Forum: Thetis
- Topic: Poor quality CW and noise bursts start and end of xmits
- Replies: 9
- Views: 2819
Re: Poor quality CW and noise bursts
Maybe shielding? Grounded?
- Thu Jul 28, 2022 5:31 pm
- Forum: Microphones, Speakers & Audio Hardware
- Topic: Which EQ to use
- Replies: 1
- Views: 1149
Re: Which EQ to use
I would DEFINITELY use the Radius 40 to cut the initial lows a bit to tame the significant boomy mud around 160 hz. Maybe another cut around 320hz for room resonance. Wide boost to the highs centered around 2.5 - 3khz. Do some light compression, and expander to cut room hiss and noise. Not sure abou...
- Sun Jul 17, 2022 5:13 pm
- Forum: Orion Mk II & III Firmware (all 7000, 8000 & Andromeda Variants)
- Topic: Quartus prime pro
- Replies: 12
- Views: 8746
Re: Quartus prime pro
Well damn, thats a curve ball I didn't see coming. How odd, standard but not the pro, huh.
- Sun Jul 17, 2022 5:09 pm
- Forum: Thetis
- Topic: Re: s-meter noise floor
- Replies: 5
- Views: 1596
Re: s-meter noise floor
Thats a bingo. thank you!
- Sun Jul 17, 2022 5:26 am
- Forum: Thetis
- Topic: Re: s-meter noise floor
- Replies: 5
- Views: 1596
Re: s-meter noise floor
Curious if there is an existing thread on why my s-meter noise floor doesnt match the panadpter. I don't have any attenuation of any sort turned on and went through many pages of settings. Please see attached image:
- Sun Jul 17, 2022 2:23 am
- Forum: Orion Mk II & III Firmware (all 7000, 8000 & Andromeda Variants)
- Topic: Quartus prime pro
- Replies: 12
- Views: 8746
Re: Quartus prime pro
To do a proper build, would one need access to multiple 7000's ?
- Sat Jul 16, 2022 9:04 pm
- Forum: Orion Mk II & III Firmware (all 7000, 8000 & Andromeda Variants)
- Topic: Quartus prime pro
- Replies: 12
- Views: 8746
Re: Quartus prime pro
I looked into the license and i think its per seat/machine. From their site which I found interesting: " Q. Do I need a license to evaluate Intel FPGA software or IP? A. You do not need a license to evaluate the Intel Quartus Prime software or prior versions of Intel Quartus development softwar...
- Fri Jul 15, 2022 6:54 pm
- Forum: Orion Mk II & III Firmware (all 7000, 8000 & Andromeda Variants)
- Topic: Quartus prime pro
- Replies: 12
- Views: 8746
Quartus prime pro
I happen to have access to the top tier quartus through my PhD program and can install locally on my machine. Would it be "legal" to compile firmware through it and make available here? Would I be able to make available a remote desktop to any developers here who would like to experiment w...
- Fri Jul 15, 2022 6:16 pm
- Forum: Orion Mk II & III Firmware (all 7000, 8000 & Andromeda Variants)
- Topic: IMPORTANT: different firmware for 7000DLE/Andromeda hardware shipped after 1 July 2022
- Replies: 47
- Views: 91472
Re: IMPORTANT: different firmware for 7000DLE/Andromeda hardware shipped after 1 July 2022
That appears to be a good list of improvements. It does not seem that functionality is affected.
- Thu Jul 14, 2022 8:24 pm
- Forum: Thetis
- Topic: vac buffer overruns during 2 tone testing
- Replies: 12
- Views: 2573
Re: vac buffer overruns during 2 tone testing
Do you suppose it's RF related coupling to some of your equipment? Running ferrite on all cables?
- Fri Jul 08, 2022 10:32 pm
- Forum: Thetis
- Topic: Splash disable?
- Replies: 16
- Views: 3415
Re: Splash disable?
https://www.dropbox.com/s/yn7rrvxu3xd1q6z/Thetis-x64%202.9.0.6%20NO%20FLAG.zip?dl=0 NO Malware: https://www.virustotal.com/gui/file/2dc1ac9721c48f43e41524785f057a53b2ad655dd3073ea8242e90414bfe2217?nocache=1 2.9.0.6 version with no flag splash. Toggled a line from true to false. x64 bit replace Theti...
- Fri Jul 08, 2022 3:48 pm
- Forum: Thetis
- Topic: Splash disable?
- Replies: 16
- Views: 3415
Re: Splash disable?
Attachments are size limited. I cannot post it here.
- Fri Jul 08, 2022 1:31 am
- Forum: Thetis
- Topic: Splash disable?
- Replies: 16
- Views: 3415
Re: Splash disable?
https://www.dropbox.com/s/yn7rrvxu3xd1q ... G.zip?dl=0
NO Malware: https://www.virustotal.com/gui/file/2dc ... ?nocache=1
2.9.0.6 version with no flag splash. Toggled a line from true to false.
x64 bit
replace Thetis.exe in C:/Program Files/OpenHPSDR/Thetis
NO Malware: https://www.virustotal.com/gui/file/2dc ... ?nocache=1
2.9.0.6 version with no flag splash. Toggled a line from true to false.
x64 bit
replace Thetis.exe in C:/Program Files/OpenHPSDR/Thetis
- Thu Jul 07, 2022 6:47 pm
- Forum: Thetis
- Topic: Splash disable?
- Replies: 16
- Views: 3415
Re: Splash disable?
I will provide a 2.9.0.6 new-compiled thetis.exe executable perhaps tomorrow that removes the ukraine splash. Optional to those who want it.
- Wed Jun 15, 2022 6:03 pm
- Forum: Thetis
- Topic: PA Gain settings (12 m behaves oddly)
- Replies: 6
- Views: 2000
Re: PA Gain settings (12 m behaves oddly)
I too have the 7000 mk2
- Tue Jun 07, 2022 9:53 pm
- Forum: Thetis
- Topic: PA Gain settings (12 m behaves oddly)
- Replies: 6
- Views: 2000
Re: PA Gain settings (12 m behaves oddly)
My 12 was awful high powered and had to turn it down in PA.
- Tue May 03, 2022 6:20 pm
- Forum: Thetis
- Topic: Frequncy Calibration / random change
- Replies: 12
- Views: 3635
Re: Frequncy Calibration / random change
Did you happen to do what I did and upgrade recently? I noticed that always resets the calibration back to 1.0.... Mine is set at 0.99999883 and always reverts when upgrading.
- Tue Apr 26, 2022 8:42 am
- Forum: Amplifiers & Tuners
- Topic: Elecraft power combo
- Replies: 2
- Views: 1653
Elecraft power combo
If I were to purchase the elecraft power combo KPA500 + KTA tuner, what are my options to get the band follow feature to function as it did with my kenwood 890? I have a USB to serial adapter elecraft send, and all the interfacing cables used to work with the kenwood. Does the "OC" port on...
- Fri Apr 22, 2022 4:39 pm
- Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
- Topic: Relay clicking
- Replies: 1
- Views: 891
Relay clicking
Curious what it is exactly that makes the click noise when TX. Has anyone done mods or replacements to make it quiet? Would it click like this if I used CW? Thanks -7k mkii.