played a bit more this morning, something is still wrong with the "attenuator on TX". Goes to zero after each TX.

I guess this is also related to my power drop since I installed the new software.

.

Just noticed after installing the latest one and running my Anan200Dat 25 watts and Pure signal, after a few minutes of QSO the power drops. I guess related to the attenuator the Japanese ham mentioned a few posts back. Restarting all gets it running again for a short time. Refolding to my other lap...

My Thetis audio was fine since I was running voicemeeter as you suggested. Recently it stopped working and I have no idea any more what went wrong. No more audio via ASIO... Did not change a thing. No more audio to or from Voicemeeter from Thetis. Can hear my own audio in voicemeeter. classic VAC wo...

_HPSDR hi-res IQ recording.pdf In Protocol1 / PowerSDR an American HANM programmed the so called hidden "Scientific mode" that was used to do some research on NVIS propagation on multiple antennas streaming the RX data to harddisk It would be great of this could be implemented in Thetis t...

Hi Scott, I am doing all tests on my Anan200D. I just mentioned that my friends with Hermes lite have the same dark audio phenomenon with Thetis in the windows directsound settings... I managed to get friture white noise running into the Anan via voicemeeter. All fine. USB micro too, all fine in ASI...

slowly getting there. Voice meeter uses ASIO. The audio integration issue is in VAC. ASIO is a totally different way of submitting audio to the radio.

Managed to route my audio test generator to thetis via voicemeeter. Now the frequency behaviour is flat but I did discover another bug. The displayed TX spectrum is totally wrong, it even moves... as you can see from the screenshot. Did not do anything and then things turned OK. But to summarize. I ...

Hi scott, tried this voicemeeter thingy but I cannot manage to route the audio from friture to Thetis. Weird program, when I switch its output the virtual input disappears... No idea how and what to select, ASIO, VIAO, WDM, MME... Lost in all these standards... What output I set my Friture to, where...

so the only difference is you two use voice meeter or the Muzy VAC, and I am not. So it must be there. (I guess walter showed the control panel of Muzy VAC ?) will try voicemeeter but I do not like all these additional programs if something is built-in. Voicemeeter is overkill for this application t...

Scott, Walter, thanks for the hints. It is /was never my intention to appear rude but having a totally shitty modulation with a 3000 euro radio renders me desperate... A group of people gathering on 80m I often speak with using Hermes Lite radios report the same issue. They are not on the internet. ...

Hello guys, The issue is still there and has been confirmed by other people using Thetis with Hermes boards. WHY is the audio not flat coming from W10. Just tried a new install W10, no audio tweaking whatsoever. Internal Anan white noise is perfect, the VAC audio is going down significantly with inc...

Hello Ernst and WU2O (can I have your name...). Ernst, external card is a no-go. No room for such when wandering around with my laptop... But U know the external USB devices are brilliant, I use them with my students for audio processing at high adc bit conversion. WU2O, thanks for the hint, will tr...

I use the windows primary output, picture enclosed. I get the same "dark" audio from friture as I get from my USN microphone that is perfectly flat on its own. enclosed also my thetis audio settings, using VAC1 as you can see.. So tell me, what do you suspect now, as the built in Thetis no...

Friture can output directly digitally to windows direct sound, so straight into VAC of Thetis. Click on the toolbox in "generator"

Great software not ? I use it to teach my students audio measurements at home during lockdowns.

Not using any equalisers in windows....

Anan 200 gets audio feed via VAC and setting "windows direct sound", coming from an USB microphone or in this case (to trace the issue of this one sounding dark) friture.org. Friture.org white noise generator has and windows directsound output, so nothing in between... Laptop built in micr...

Great hint, did not know the Thetis had built in white noise. Just tested, perfectly flat !!!

So the issue is related to windows audio handling or VAC...

As far as I know all my windows settings if any are flat.

Using windows direct sound.

Any more ideas ?

Pedro ON7WP

exactly, this is what I would expect. Nice plots. Flat.

So the only difference in setup is you have an 8000 and me a 200...

even more puzzled now.... Hardware issue in Anan200d built on the Hermes legacy ? Alle Hermes Lite users report the same issue...

Pedro ON7WP

You can see the lines of my TXbandwidth filter. 300 Hz to 2900 Hz.

It is a 50 dB coupler. 30 dB directional coupler and 20 dB attenuator. It does not matter if there is an antenna or not. The thing has great directivity....

apparently everybody I speak to noticed this behaviour with their Hermes Lite's etc. They all have a TX spectrum that goes down like hell. Nobody cares, they just put their TX analysers extremely to compensate. To my opinion this is a serious programming bug in the modulator software. It should be f...

I am not talking about a few dB.

This is what my TX looks like taken from a -50 dB coupler on the antenna: All settings flat. White noise.

Dear colleagues, After getting complaints about dark audio I decided to feed some white noise directly into VAC1. A great freeware program for audio analysis is Friture.org. After doing so it was clear to see that the Anan 200D flat spectrum was absolutely not flat, severely dropping above 1 kHz. Th...

Running the latest update...

since the installer version, apparently I cannot set my mic level. Mic slider has no effect.
Master AF also not working. RX1AF OK

rest of thetis seems ok....

what I am doing wrong ? USB micro. VAC1 enabled.

Pedro ON7WP

Yes they have effect but I have no idea if a setting of 44 dB on 20 meter is normal or not. Then I get 50W FM and 100W SSB

Pedro

Hi Folks,

did a new install. All works but spacebar ptt and qwerty-asdfgh up down tuning... I can only type in a frequency....

any hints.

I did not find anything in the manual about switching on/off the keyboard....

HELP ????

Pedro ON7WP

Dear folks, I found some pictures in the legacy Yahoo part of this forum referring to a problem I am dealing with, but there are only pictures, no text.... My Anan drops power above 20m always worse till only 1 watt is left on 6 meter. Is there somebody who can tell me where to look/what fails. I ju...