Hi Richie, I have to questions: 1) I wanted to assign a knob/slider to "gain" of menu diversity, but the configuration menu for MIDI allows only WHEEL for this parameter. I think a slider/knob for gain (from 0-1) would be sufficient. 2) I tried also to assign a knob/slider to "gain mu...

Hi, I just tested 2.10.3.4 pre-release 5 and with the new option (checkboxes) in menu MIDI, at least one actual DJ-Controller (DJCONTROL INPULSE 200 MK2) is working. Important is, that checkbox "Also include status" is also checked. By the way: The parameters "MIDI Wheel updates/step&...

Ernst,
I agree with you and I am very excited to see the next enhancement by Richie.
73 Josef

Richie, I tried to change the VFO step size from 2Hz to 5Hz in the appropriate tune_step_list (for my own version with modified diversity functions - just for fun) in file "console.cs" and I've got an error message in VS. The errormessage says "variable infoBar wasn' t declared or not...

Went from one of the k series pre-releases to 2.9.0.5, it needed a remove and a re-install, then no troubles. Symptom was, the radio just didn't "start", software powered up but nothing "running". The power profiles are a great idea, thanks. I have the same problem after pressin...

Hey Richie, tnx for the new version (2.9.0.5), here no problem with installing (after deinstalling with W10-system procedure). WANTWISH a) Is it possible, to include the function / checkbox "adjust min to noise floor..." in your new pulldown buttons below the waterfall? Sometimes it is use...

oe3ide wrote:Josef, you can copy
ptbAF-head.png to ptbTune-head.png
and
ptbAF-back.png to ptbTune-back.png

73 Ernst

Ernst,

tnx for the hint, its working.

73 Josef

Hey Richie, tnx for your new pre release. I have 2 questions: a) I dont have a slider for tuning power 2022-04-17 20_14_00-Window.png I am using IK3VIG-skin. Can I copy an existing slider with new names? (I hope this is not a to stupid question) b) the slider for Width works only in both directions,...

Thanks for all the wants/wishes. Some are easier to implement than others. Take the 5Hz step size for example. On the surface it looks trivial to implement this, just insert it into the list right?. However, Thetis stores the stepsize as the index number into that list. So everyone that had 50Hz se...

Hey Richie, I have two wantwishes: a) Is it possible to get a 5Hz step for the VFOs in CW-mode? b) Is it possible to make an additional variant concerning the zero beat function: Checkbox for "USE RIT for ZERO beat, only if RIT is ON"? If RIT is off the existing checkbox status and functio...

Using Thetis 2.9.04 (test) 200D MODE SELECT PROBLEM- mode reverts to DIG when another mode is selected (for example USB or CW). Can be solved by cycling Thetis ON/OFF. SPLIT PROBLEM with TCI- using JTDX in split mode- this causes JTDX crash when band is changed and MOX activation (has been reported...

Hi all, If I run the installer from Thetis-v2.9.0.1.x64.msi, Setup (see attachment) tells me that it wants to update files that are used by: - Dell Support Assistant Remediation - Firefox - NVIDIA LocalSystem Container What files are overwritten here and can this cause problems? I don't remember th...

Hi Richi,Is it possible to correct the difference between "level at the blobs" and "s-meter-level" automaticaly? I know, that there is a correlation between the "Bin Width" and the level-difference, but I didn't find the mathematical relationship. If the Bin Width is o...

Hi Richi, first of all: Again and again: Thank you very much for your energy, endurance and time in this project. You did a terrific job the last months. I enjoy your software every day. Sometimes in "CTUN-mode" the filter window is moving in the oposite direction of the mouse cursor. But ...

Hi Richie, I have a (may be stupid) question concerning the 0-Beat tune function. Is it possible to realize the auto TUNE function as follows. 1) If RIT is OFF: Working as up to now (either with VFO-TUNE or automatic-RIT-ON-TUNE depending on existing checkbox value in SETUP) 2) If RIT is allready ON...

For those that are able, please could you check the ErrorLog.txt file for the following [0x8899000C] and let me know how many occurrences there are in the log. I do not need the log, just the number of occurrences if you have some. Depending on the frequency, I may have to put effort into recoverin...

Hey It would be very good if the level of RX AF, AGC Gain was preserved not only by ranges, but also by the type of modulation. Hi (again) I think that it would be also usefull, if the values for the diversity functions (gain, factor and phase angle) are also saved by band ("by mode" is n...

@dl5tt Josef, most (if not all) of your diversity concerns (and zero beat issue) were addressed in 21b, 21d and 21f, all released sometime in July 2021, including the ability to change the max gain beyond 1. Richie. Hi Richie, tnx for your quick reply. I downloaded your latest version and testet th...

Hi Richie, 1st: I wish you a happy new year and 2nd: Thanks for your great job and time your are investing here. And now my concern: For me the diversity function is very important, due to a lot of local QRM. I am not sure, if you had the time for all my wishes / proposals concerning the diversity f...

Hi,
tnx for your information.
I will try to get an older (may be used) DJcontroller.
73 de Josef

Hi, I bought a HERCULES "DJCONTROL INPULSE 200" and I am not able to map sliders and wheels (buttons are no problem). I made the mapping tests without additional drivers (only USB plugged in) and also with additional drivers by HERCULES. I did this tests also with another PC ( i7-8700K CPU...

Dear Richie, thanks a lot for your fantastic work. Unfortunately I can't use your versions (I can only test your improvements), because I need diversity functions (nearly on all bands to supress solar panel inverters). Could you please remove the limiting for the "gain factor" (at present ...

Hi Richie, concerning the (my) attenuator problem (in normal operation). After the information from OE3IDE I tried to verify his results, but with no success. So I did a Database reset....and: Now it works. If I reload my old database, the problem is again existent. So the problem must be in my dat...

Hi Richie, concerning the (my) attenuator problem (in normal operation). After the information from OE3IDE I tried to verify his results, but with no success. So I did a Database reset....and: Now it works. If I reload my old database, the problem is again existent. So the problem must be in my data...

Hi Richie, thanks for your quick answer. Concerning the first point (ATTenuator inverse coupling between RX1 and RX2) DDC0 is assigned to ADC0 DDC1 is assigned to ADC1 DDC2 is assigned to ADC2 according to the defaults for protocol 1. Is that not OK? But the most (me confusing) point is, that the S...

The following noted: filter window high-filter value lg colours vfo lock bandstack to front Need to install P1 on my 7000 and make tests regarding ATT, that'll be tomorrow. dl5tt : just so that you are aware, if adcs are the same for rx1+rx2 then then attenuation will be linked. If you change rx2 i...

Hi Richie, tnx a lot for new 21d. I looked only for my issues with following results (using Protocol 1 with an ANAN 7000 DLE MKII with NUC I5): a1) If I use the ATTenuator, the spectrum values are increasing with the attenuation value and also the S-meter readings. For instance, an attenuation of 30...

Dear Richie, first of all: Thanky you so much for your fantastic work here. Today I tried to verify some issues with following results in version 21c (running ANAN 7000 DLE MKII with Protocol 1 (because P2 doesn't work stable): a) Diversity: I am not able to create a GAIN-value greater then 1 in the...

UPDATE 21c 21c is now up in the first post. There is also a fix at startup where any rx with CTUN enabled would not appear correctly. Please test the start up state in this regard. Sorry for the cock up with the CTUN band issue. Also, I am working through the diversity form at the moment. Scaling h...

Hi Richie, I am very happy to see your activities in Thetis. I've seen following problems in Thetis, using an ANAN 7000 DLE MKII with protocoll 1 (after having a lot of problems with protocol 2 due to squence errors and information losses between ORION and I5 NUC). The following issues are existent ...