...and six more weeks to wait for.

on technical spec tab: RF Output Power (Maximum): 1000W PEP: SSB/CW. 500W: FM, RTTY, Digital. 275W: AM

Another 6 weeks to wait for...hopefully

Many thanks!

Hi, I noted that I have LED #2 lighted in red with 7000DLE mkII firmware 2.2.2. With firmware 2.1.8 every LED is grey. What "LED Mirror" does it mean? Sameone can explain briefly or send a link where can I find an explanation? 73, Maurizio I2NOY https://i.ibb.co/GPzdCzR/Thetis-LED-mirror.p...

Resetting the database solved both issues.

After some check, I noted that the ATT on TX, set at 31 normally, reverts to 0 as soon as I enable PS-A but remains to 0 when I disable PS-A. I noted that sometimes the ANAN step attenuator is enabling on RX1 by itself. I am not able to reproduce perfectly the step attenuator issue but I was playing...

After some other test and reading more on firmwares, I get back to firmware 2.1.18 as I have at 99% the Anan 7000 mkII with FPGA Cyclone IV EP4CG and noted some strange behavior on 2.2.2.
I confirm that issues on Thetis are still present.

Orion mkII of late 2020 updated flawlessy to FW 2.2.2 and Thetis 2.10.3.6 dev_2 is working perfectly. Thanks guys! P.S. after some check, I noted that the ATT on TX, set at 31 normally, reverts to 0 as soon as I enable PS-A but remains to 0 when I disable PS-A. I noted that sometimes the ANAN step a...

I received an email from Abhi today, saying the first batch of Anan-G2 1k will be shipped in 3-4 weeks.
Just for Xmas...

Hi everyone. Just not related only to 2.10.2, but I noted that the S-meters seem don't take care of transverter gain set on XVTRs settings: https://i.postimg.cc/d02WjtsC/Screenshot-2023-10-08-100635.png I have S7 when transverter is ON and S5 when it is OFF. When Thetis is switchwd OFF the S-meter i...

"...we are targeting to initiate shipping of the ANAN-G2-1K orders starting October 30th..."
As someone guessed sometime ago, they had to enhance the dissipator and work on final unit.

Ten months and going on...
G2 1k

Many thanks for any suggestion.
Best 73s.

Hi, is it possible to get a realtime attenuated signal (55-60 dB) from the output of OM-Power or others amplifiers that don't have the output connector carrying this signal?
Any market product available?
Many thanks.

I am quite sure I will light first candle birthday from my order, in August 2022, before receiving the G2 1k.

No news till today.
Ordered in August 2022.

73

Maurizio

Who knows?
Maybe the meaning of the phrase is that Intel Cyclon V FPGAs will be delivered by another distributor...

Any news on FPGA Cyclon V that are the only components missing to enable shippments of new 8000 DLE MkII?

Just received today an email from Abhi informing the rig needs only new FPGA and Intel distributor promised the delivery of these components at the end of March 2023.
Apache Labs is expecting the delivery of first bunch of 8000DLE MKII in first week of April.
Crossing fingers...

"December delivery lot" is probably intended in year 2023...

By the way, I ordered in August 2022 the new 8000 with 500 W and till now no news.

Many thanks to both!
On WE I will try new configuration.

Many thanks for clarifying a little my confused ideas. :D I have to say that my software configuration is more stable and with same latency than Muzychenko virtual cable that I used before in WDM. Can you briefly suggest the configuration of VoiceMeeter Banana to connect Thetis audio to WSJTx? Which...

After some tries, yesterday I was able to use ASIO drivers on both Thetis and WSJTx and it is working pretty good. ;) The solution is to install ASIO bridge, also called Hi Fidelity Virtual Cable. You have to config Thetis to use ASIO drivers provided by VoiceMeeter Banana and to route audio to PC m...

Hi Tony, can you explain how you are able to use ASIO on both Thetis and WSJTx? I installed VoiceMeeter Banana and I was able to route the ASIO VAC of Thetis to PC speaker and microphone. I installed both the VBCABLE and Hi-Fi cable but I lost my mind trying to configurate the control panels, in ord...

Thanks Maurizio, I will take a look at some point, but I have not worked on those antenna notifications (other than making the icons). are you not using the xvtr socket for 28mhz in that case, which is why it shows xv and not rx ant 1? 144mhz should probably say xv as well (or any xvtr band that is...

Hi Richie, I think it is only a cosmetic issue and only for people using a transverter. In order to use a transverter with the IF at 28 MHz and route the signal through the XVTR IN rear connector, you have to thick XVTR checkbox: https://i.ibb.co/gJmzPg6/Thetis-XVTR-setup.jpg with this configuration...

Hi Richie, following mod in 21k9c broke the CAT communication between Thetis and my SPE Expert 1.5K v2 linear amplifier: -change: KenwoodAI command broadcast functions moved into delegate system I am back to 21k9b and CAT is working now. The connection between PC and SPE Expert is done by an USB to ...

oe3ide wrote:Hi,

pls place these png's into the skin directory (Thetis must be closed):



73 Ernst

Hi Ernst, now it is perfect!
Many thanks and 73.

@oe3ide Dear Ernst, I am using 21k9rc5 with your Yaesu skin, I have downloaded and applied mods for rc4, but I have a couple of issues: https://i.ibb.co/gmcfctc/Yaesu-skin-rc5-1.jpg please note the double bezel https://i.ibb.co/N7W96VC/Yaesu-skin-rc5-2.jpg please note a small piece of a new window u...

21k9pre4d is working without DirectX error on my PC.
21k9pre4b had DirectX error after 10-20 minutes.

73,

Maurizio I2NOY