Juha has an extra zero in the N1MM configuration window.

Should be 127.0.0.1:13013 not 127.0.0.0.1:13013

George / W7GES

No worries, Joe! I hope you get the G2 you ordered soon. It's unfortunate that nobody was able to answer your other question about cables. I gave him a lead on a XLR to 1/4" cable that works for me off Amazon in a direct message. JOLGOO XLR Female to 1/4/ 6.35 mm TRS Plug balanced cable 3.3 fe...

Also, If you carefully position and size the VFO A and VFO B containers over the default Thetis ones you can hover your mouse over the VFO A or VFO B container and use the mouse wheel to scroll the frequency up and down... I will add a screen shot after I'm in the shack and start the rig up next tim...

Well, I wanted to come back here to make final report on delivery of my 100watt G2. It arrived today via FedEx with no call to customs needed, or tax needing to be paid for release. From preorder deposit to delivery it took from Dec 5th to Feb 20th, so 77 days or 11 weeks. Have to be patient with A...

Well, I wanted to come back here to make final report on delivery of my 100watt G2. It arrived today via FedEx with no call to customs needed, or tax needing to be paid for release. From preorder deposit to delivery it took from Dec 5th to Feb 20th, so 77 days or 11 weeks. Have to be patient with A...

Update: I cannot find p2app and FPGA FW in another location thanin N1GP's repository. Laurence, is the firmware also available in the DL1YCF repository? I was not able to load V12 file... 73 Volker Volker, I ran the git pull commands (cd github/Saturn, etc) as described in the manual page 30. I did...

Yes, If I’m just dx’ing / rag chewing and don’t want the Heil microphone boom in my field of view I put my headset on with the mic plugged in the TRS / balanced mic jack directly. I just wanted to let you know it works for me with a dynamic mic directly into the jack. If you have rack equipment with...

Hi Brent, I have a G2 with Front panel display. I have used the XLR / Balanced TRS input on the back panel successfully. I’ve only tried it with a Sennheiser Headset with a dynamic microphone. I did listen to my transmission via an online SDR and transmitted 1000 watts on 10 meters and the audio sou...

I just tested the Balanced mic input with my G2 w/front panel display. I used an amplifier and transmitted 1000 watts, listening through a kiwisdr. I could not hear any distortion on my signal. I used a Sennheiser HMD-280 microphone headset with the balanced mic input. My normal SO2R setup uses a He...

I really like the ELAD TM-2... It has a small LCD screen that shows the frequency / mode / signal strength. I set the background LED to blue when VFO A is selected and yellow when VFO B. Transmit turns the LED Red. There are knobs for vol / mult / VFO. My favorite part is that I can set VFO A to the...

I had terrible power line noise to my NE that the NB circuit in Thetis (or my TS-890) could make a dent with. Sometimes it was easier to aim my beam SW to work Europe since I could hear them better off the back of the beam (and no this wasn’t during times when Long Path was open). Using Thetis I rec...

I was able to get the repository url changed and the pihpsdr software updated using your instructions.

No error messages or prompts for username / password so I can't comment on how to proceed in those circumstances.

I am using a G2 w/front panel.

Thank You Rick and Christoph

73,

George / W7GES

Thanks Richie,

I appreciate your hard work on Thetis.

The pre-release is working well for me.

Thanks again,

George / W7GES

Sale was not finalized... I purchased a G2 so I don’t need my 7000 DLE MK II any longer. I purchased this new direct from Apache Labs and received it in late June 2021. It has Protocol 2 loaded. No issues, smoke-free shack, no pets, etc. I didn't like the front panel power switch upside down so I fl...

I'm not sure which decoder software you're using but it doesn't really matter as the basic setup is the same for all... Select the audio source from Thetis in the RTTY software decoder menu (same one you use for WSJT-x, etc) for transmit and recieve. I have a separate Thetis transmit profile for RTT...

Hi Richard, I haven't had time to try my G2 out with RTTY but I am using the same Thetis profile I was using with my 7000 DLE MK II so it should work fine. I am very busy right now as I am finishing the groundwork for a 45 x 60 building and the clock is ticking on the equipment rental (Brand New Joh...

Bryan,

I'm using a Presonus Studio 192 mobile audio interface with my G2 Front Panel. Works well as it did with my 7000 MK II DLE.

The application that runs on the pi to interface with Thetis is p2app I'm making a guess that is an acronym for protocol 2 application.

73,

George / W7GES

Try editing the /etc/xdg/lxsession/LXDE-pi/autostart file. This worked on my G2 with front panel display. Comment out either pihpsdr (if you have a G2 Front panel and don’t want pihpsdr to start) or p2app. You will need to use the sudo command to run as root to edit the file. A # sign at the beginni...

What procedure do you use to test the latency?

I opened the /etc/rc.local file and it doesn't run anything at startup on my G2 100 front panel. I also checked crontab -e and the crontab service is not setup. For my third strike I tried /etc/xdg/autostart and the only executable file was a script that prompts a password change when ssh is enabled...

I have tried this twice, but I am only getting FW version 7, not 8? And nothing about WDSP. John N2KBE The Build Version and WDSP version are for the pihpsdr application. Click the about menu button. The FPGA, etc information is displayed when you start the p2app. Don’t start Thetis before looking ...

I followed Rick's steps. When I tried to install libgpiod-dev a message said it was already installed and not updated I ran git reset --hard origin/saturn git pull gave me a message nothing to pull ran the make clean and make -j9 and install was completed. I ran the flashwriter Restarted the G2 and ...

Did NOT fix the issue with the Balanced input my my G2 100W no panel model? Still can only use the 1/8 mic input for voice. It did fix the monitor audio is now working! It also fixed the issue where audio would drop out when opening and closing the RX2! Were you able to successfully run the steps i...

I just tried to update my G2 Software and Firmware. I was able to update P2_app and audiotest following these steps. When I tried the gitpull in the pihpsdr directory I received a message that my email address and name were not set up but the error message said to add them by using git config --glob...

Top screenshot is using my Sennheiser headset mic bottom screen shot is Tune enabled. Scope time is set to 50uS.

73,

George / W7GES

Hello George, Can you set your Scope Mode to 25 or 50uS (Setup/General/Display)? That is not detailed enough. Also see what it looks like in Tune? 73 John N2KBE Hi John, I’ll try that tomorrow. I just shut down the shack and disconnected the antennas as I received a “lightning nearby” warning. Also...

This time I used the XLR / Balanced mic jack on the rear panel and boosted the mic gain...

BTW, this is Whiskey Seven Golf Echo Sierra spoken over and over. I've seen the waveform enough times to say that it looks normal to me...

George / W7GES

As long as I'm in my shack working on getting my G2 integrated into my SO2R station I gave this a try. This screenshot is from a cheap computer headset microphone plugged into the front panel jack. I didn't mess around with the level to get the correct amplitude but just wanted to show the scope sig...

The newest release of piHPSDR can select the XLR input from a setup form control. Soon Thetis will be able to do the same. I've found why line in isn't working (the code is taking right line in, and it should be left). That will be fixed soon and I'm making audiotest able to show line in signal lev...