Hi Nir,
strange. I don't know how the discovery works, but for me this sounds like a problem on the network layer.
73, András / HB9LFQ
Search found 20 matches
- Sat Mar 16, 2024 5:49 pm
- Forum: piHPSDR
- Topic: piHPSDR -- Latest Releases and Release Notes
- Replies: 12
- Views: 45307
- Mon Mar 11, 2024 5:47 pm
- Forum: piHPSDR
- Topic: piHPSDR -- Latest Releases and Release Notes
- Replies: 12
- Views: 45307
Re: piHPSDR -- Latest Releases and Release Notes
Hi Nir, and you checked the network connection? Can you ping the Anan? You should know the Anan's IP from Thetis on WIndows. If I ping my Anan it answers, so if that's not the case on your side, then first you've got to sort that issue out. Does the IP setup match (IP range, netmask, routing etc.)? ...
- Sun Mar 10, 2024 7:15 pm
- Forum: piHPSDR
- Topic: piHPSDR -- Latest Releases and Release Notes
- Replies: 12
- Views: 45307
Re: piHPSDR -- Latest Releases and Release Notes
[quote="nir_4x1fk"]Hello Joerg, Sorry, but no success. The program not recognize my Anan 7000DLE Mkii. quote] Hi Nir, my setup: - Ubuntu Linux 22.04 LTE - Anan 7000DLE Mk. II with protocol 2 - piHPSDR RELEASE-2.2-DL1YCF, compiled from Gitlab sources works without problems. So you may have ...
- Sun Jul 02, 2023 7:28 pm
- Forum: piHPSDR
- Topic: piHPSDR AF on Ubuntu
- Replies: 4
- Views: 5736
Re: piHPSDR AF on Ubuntu
Hi Rick,
looks interesting, I built it, but had again to adjust the value. This time from -40 to -70 as it was too loud on 39.5 (-40 sets audio off). Is there some list about the exact differences? I didn't find anything neither on github nor on Christoph's homepage.
73,
András / HB9LFQ
looks interesting, I built it, but had again to adjust the value. This time from -40 to -70 as it was too loud on 39.5 (-40 sets audio off). Is there some list about the exact differences? I didn't find anything neither on github nor on Christoph's homepage.
73,
András / HB9LFQ
- Sun Jul 02, 2023 4:44 pm
- Forum: piHPSDR
- Topic: piHPSDR AF on Ubuntu
- Replies: 4
- Views: 5736
Re: piHPSDR AF on Ubuntu
Hi all, I'm running piHPSDR on a Intel NUC with Ubuntu 22.04. I figured out myself. I had to change in sliders.c everywhere the factor 100 for active_receiver->volume to 5000 (e.g. line 122: old: gtk_range_set_value(GTK_RANGE(af_gain_scale),active_receiver->volume*100.0); new: gtk_range_set_value(GT...
- Sat Jul 01, 2023 3:27 pm
- Forum: piHPSDR
- Topic: piHPSDR AF on Ubuntu
- Replies: 4
- Views: 5736
piHPSDR AF on Ubuntu
Hi all, I compiled and run piHPSDR on Ubuntu with an ANAN-7000 DLE2. It works in RX and TX. I use a headset connected to MIC/headphone on the front side of the radio and my problem is that the audio is way too loud even if AF is set to 1 (on 0 there is no audio). Is there a way to somehow rescale th...
- Mon Apr 04, 2022 4:05 pm
- Forum: Thetis
- Topic: Thetis 2.9.0 Released (updates--see first post & now with link to Beta versions)
- Replies: 61
- Views: 43580
Files in use?
Hi all, If I run the installer from Thetis-v2.9.0.1.x64.msi, Setup (see attachment) tells me that it wants to update files that are used by: - Dell Support Assistant Remediation - Firefox - NVIDIA LocalSystem Container What files are overwritten here and can this cause problems? I don't remember the...
- Sat Nov 13, 2021 6:24 am
- Forum: Thetis
- Topic: Working 10 meter FM repeaters
- Replies: 2
- Views: 1354
Re: Working 10 meter FM repeaters
Hi Juha,
just change mode to FM and then you see the options where you can configure repeater offset etc.
The config you see is for the HB9HD repeater on 29650, no ctcss, -100 kHz offset. You can program this in a memory as well.
73,
András
just change mode to FM and then you see the options where you can configure repeater offset etc.
The config you see is for the HB9HD repeater on 29650, no ctcss, -100 kHz offset. You can program this in a memory as well.
73,
András
- Tue Oct 19, 2021 3:39 pm
- Forum: Thetis
- Topic: ADC1 overload when monitoring on ANAN 7000 DLE MKII
- Replies: 29
- Views: 9794
Re: ADC1 overload when monitoring on ANAN 7000 DLE MKII
Hi all,
yes dither and random are turned on as with the older Thetis/Firmware.
Grüsse,
//András
yes dither and random are turned on as with the older Thetis/Firmware.
Grüsse,
//András
- Sun Oct 17, 2021 6:11 pm
- Forum: Thetis
- Topic: ADC1 overload when monitoring on ANAN 7000 DLE MKII
- Replies: 29
- Views: 9794
Re: ADC1 overload when monitoring on ANAN 7000 DLE MKII
Hi all,
I have ADC1 overload since I updated to protocoll 2 v2.1.18 and Thetis 21k7. Never had this before. As I did the updates the same time I cannot tell when it stared. But I did not have it with 2.0.2b and 21k6. Trx is is a ANAN 7000 DLE MKII.
73,
András
I have ADC1 overload since I updated to protocoll 2 v2.1.18 and Thetis 21k7. Never had this before. As I did the updates the same time I cannot tell when it stared. But I did not have it with 2.0.2b and 21k6. Trx is is a ANAN 7000 DLE MKII.
73,
András
- Wed May 12, 2021 7:56 pm
- Forum: Digital ("Virtual") Audio
- Topic: How to solve latency problems and VAC under/overflows in Windows 10
- Replies: 55
- Views: 25798
Re: How to solve latency problems and VAC under/overflows in Windows 10
I suspect that the specific NIC and NIC driver may make a difference as well. For instance, this change has made zero difference in the performance I see on my PC, which was already good without it. Hi, ok, it helped with a: Realtek PCIe GbE Family Controller Driver version: 10.35.510.2019 Windows ...
- Sun May 09, 2021 1:55 pm
- Forum: Digital ("Virtual") Audio
- Topic: How to solve latency problems and VAC under/overflows in Windows 10
- Replies: 55
- Views: 25798
Re: How to solve latency problems and VAC under/overflows in Windows 10
I'm not using VAC but analog audio instead. Will these registry tweaks still help? Hi, I don't use VAC for audio, only for WSJT-X/WinLink. I did these changes and now Thetis runs stable without dropouts on RX/TX. There are some RX droputs after a system startup when everything is loaded at the same...
- Mon Apr 26, 2021 5:10 am
- Forum: Network Connections & Network Hardware
- Topic: New 7000DLE Mk2 black arrives issues
- Replies: 9
- Views: 10843
Re: New 7000DLE Mk2 black arrives issues
Hi, I've rceived my 7000 some weeks ago and it works with Thetis with P1 and P2 (was shipped with P1 installed). I used the bootloader to set a static IP and to flash the P2 firmware, both with no problems. Just remember to take the correct firmware and name it correctly otherwise the bootloader doe...
- Wed Apr 21, 2021 6:13 pm
- Forum: piHPSDR
- Topic: Full output power with Anan 7000?
- Replies: 3
- Views: 4752
Re: Full output power with Anan 7000?
Hi all,
yes, I tried with Mic Boost but that didn't help and I try to adjust under PA, but the lowest value e.g. for 10m ist 38 and then I get approx. 30w max. And according docu the lowest value should give the highest output power...
73,
András
yes, I tried with Mic Boost but that didn't help and I try to adjust under PA, but the lowest value e.g. for 10m ist 38 and then I get approx. 30w max. And according docu the lowest value should give the highest output power...
73,
András
- Mon Apr 19, 2021 12:51 pm
- Forum: piHPSDR
- Topic: Full output power with Anan 7000?
- Replies: 3
- Views: 4752
Full output power with Anan 7000?
Hi all, I successfully could build piHPSDR on Ubunu and MacOs, receive etc. works, but on both systems I don't manage to get the full 100W output of the Anan 7000 (No problem withThetis on Win, so device is ok). Even with mic gain on 50 and drive on 100 I get only approx 30W power output and it does...
- Sun Apr 18, 2021 7:16 pm
- Forum: Digital Mode, Rig Control & Logging Software
- Topic: Packet Radio ?
- Replies: 31
- Views: 14193
Re: Packet Radio ?
Many thanks for the settings. PTT is working now and with some info from the thread here I managed that WinLink and Vara are working I attached my VAC settings and WSJT-X is still working without reconfiguration.
- Sun Apr 18, 2021 5:50 pm
- Forum: Digital Mode, Rig Control & Logging Software
- Topic: Packet Radio ?
- Replies: 31
- Views: 14193
Re: Packet Radio ?
Hi all, a question: How did you configure WinLink that PTT works? WSJT-X works without problems when I configure a Kenwood TS-2000 incl. changing frequency and PPT on TX. In WinLink I tried all Kenwoods, but none of them triggers PTT. When I solve the problem with VOX, then I have the same that I he...
- Tue Apr 13, 2021 4:01 pm
- Forum: SDR Console
- Topic: SDRConsole and Anan 7000DLE MKII
- Replies: 6
- Views: 15545
Re: SDRConsole and Anan 7000DLE MKII
Hi all,
many thanks for the feedback. I already wrote to the SDR Console mailing list, but no reaction. I flashed Firmware 2.19 as well, but the
same result.
73,
András
many thanks for the feedback. I already wrote to the SDR Console mailing list, but no reaction. I flashed Firmware 2.19 as well, but the
same result.
73,
András
- Mon Apr 12, 2021 5:20 pm
- Forum: SDR Console
- Topic: SDRConsole and Anan 7000DLE MKII
- Replies: 6
- Views: 15545
SDRConsole and Anan 7000DLE MKII
Hi all, I just got my Anan 7000DLE MKII and updated it to Protocol 2 (2,20b). Everything works fine with Thetis. SDR Console 3.0.27 detects the radio without problems and I can use it (TX/RX) on 80m and 40m. But 30m and up I have no signals (only some spurious signals). Seems like the wrong bandpass...
- Sun Apr 11, 2021 10:34 am
- Forum: Protocol 2 Firmware (all radios)
- Topic: OLD 7000/8000 Orion MKII Protocol 2 Firmware Topic
- Replies: 185
- Views: 179839
Re: New 7000/8000 Orion MKII Protocol 2 Firmware Topic
Hi all,
just got my 7000DLE MKII and it was shipped with protocol 1 v 2.7.
73,
András
just got my 7000DLE MKII and it was shipped with protocol 1 v 2.7.
73,
András