Excellent!

Thank you Scott.

Scott - The macro function I am seeking is create a table or chart of SWR readings while stepping across a band, keying and reading / recording SWR. Example - 40 Meters * set frequency to 7.000 (or 7.003) * Key Tune * Read and record SWR * Increment up 20 khz * Repeat up to 7.3 (or 7.297) and stop D...

I like to use the LinAuto setting for the waterfall palette. This is fine on the lower frequency bands where there is some noise or some level of signal activity. When I go to a higher, quiet band with only light activity and no noise the waterfall background automatically adjusts per lack of noise ...

Scott - I'll take your reply as a 'no.'

Is there a repository of mocros that will work with Thetis?

...way out of my league, but I compliment your good documentation!

The waterfall color palettes are in Setup / Display / RX1 and RX2. On the right under the heading of Waterfall / Palette. At least in my v2.8.11.


Kind regards,
Dick - KA5KKT

Thanks, fellow.

If I understand correctly, it is Ver: 2.0

I'll take a look at your suggested reference by Scott.


Kind regards,
Dick - KA5KKT

Thanks, Rob.

...looks like I good up to about 1.5 megs.

I looked at what it takes to update firmware today. It didn't seem overly simple.


Thanks again,
Dick - KA5KKT

Is there a tool to determine which Protocol firm was is installed in an Anan? Link..?

Tom - In the VFO pane is an area, "BandStack." Below that title are two squares (black?) with numbers. Clicking on those squares will open the band stack memories.

Right you are, Scott. I hadn't explored programming that button too deeply. I has assumed it would need a Keyboard Equivalent. However, there is 'Center Click' which seems to be the equivalent of 'Wheel Click.'

Thanks, Scott.

The mice use different control software. Logitech Options vs. Logitech Setpoint. Options graphically highlights the programmable features of the Anywhere mouse. It does not include 'wheel click.' Alternatively there might be an opportuninty to program another button specifically for Thetis if there ...

I found my previous mouse. That mouse is an M705. Appears the batteries in it are still good. Now, if I can find the proper dongle for it...or use the Logitech Unifying Software to connect it... By the way, the Anywhere mouse is more diminutieve and lightweight. More comfortable and the additional f...

From the RX side of calibration, now over to the TX side. Per the "Manual Calibration Procedure," I read, "3. Set “TUNE”, Power % to 100." Later steps indicate using 10 watts to calibrate each band. Should the preceding quote indicate '10' rather than '100?' And is that a % or wa...

My Logitech MX Anywhere 2S looks near idential to that. The major advangates are that it will work with up to 3 computers and it is rechargeable. Why it doesn't 'wheel click' is a mystery to me. https://www.amazon.com/LOGITECH-Anywhere-Wireless-Laser-Mouse/dp/B089TMKQB3/ref=sr_1_1?crid=SJPDB8BQZLP3&...

"Wheel Click to Delete a Bandstack Entry."

I'd like to edit the band stack memories. However I don't have a 'Wheel Click' feature. ...suggestions other than a different mouse..?

7000DLE MkII - ordered 12/15/20 - arrived at destination in Kentucky, US 02/03/21

Thanks, Scott.

Great answer, Scott! I couldn't find that explained anywhere I had looked. Your reply is in keeping with what I had expected or wanted to know. It seems one can operate the Anans with the Controller V2, but with limited functionality. Kind regards, Dick - KA5KKT PS Ever envious of your avitar, I cre...

I'm a little confused on the operation capabilities of the Controller V2. In the case of a 7000DLE MkII can the Controller V2 provide all that is necessary to operate without the 7000 having a connection to a full computer / network and HPSDR? If so, what are the Pros and Cons of operating in such a...

While on the topic of RX Level Calibration... Using a non-Anan radio at present (7000 on the way soon), I find that in calibrating with a single frequency signal source for S-9, then switching to SSB signals, there is a dispariity. It has been suggested that the disparity is due to the wideband rece...

I've worked up an outline design with Doug and Warren for a client/server split in Thetis. It is a monstrous amount of effort - probably a person-year of full time work. Done part time in evenings, potentially several years. There is something like 600 function calls that need to be replaced by IP ...

What version of firmware are recent ('21) DLE 7000's arriving with?

No need to upgrade that processor at all. I have a 4 core 8 thread i7-6700K and run 15%-17% CPU load (total system load) while running Thetis v2.8.11 with 2 full panafalls (2 receivers) on a 40 inch monitor. My son has a 6 core 6 thread i5-8600K and his machine is faster than mine on all the CPU be...

"...Thetis is core hungry..." I have an Anan 7000DLE MkII on order. My daily driver is an I5-9600K. It has 6 cores / threads and 16gb of ram. Will be useful upgrade the processor? While on the topic of cores, do additional threads help as much as additional cores? I.e., I9 processors have ...

K1LSB wrote:My black 7KDLE MKII shipped with a rather short (5 or 6 foot) but stout Powerpole cable.

Thanks... That lets me know I can offer my 'for sale' rig with a power cable.

Does the 7000DLE MKII (and other Anans for that matter) ship with a power cable?

Thanks, Scott. I'm not sure my question was well phrased, but I think I understand. Using an external (analog) antenna phasing unit with two antennas, I get a single display on my non-Anan system that utilizes an early variant derived from PSDR for Pan / Waterfall display. With only a single receive...

I'm expecting the arrival of an 7000DLE MkII before too long.

Is there an opportunity to display the two receivers in a single Pan / Waterfall window?