Search found 11 matches

by casey1elqueo
Fri Oct 16, 2020 1:24 am
Forum: MIDI Controllers (PowerSDR & Thetis)
Topic: Which one? Anyone compare them?
Replies: 24
Views: 5362

Re: Which one? Anyone compare them?

Was using the DJ Compact which works great and is about $60, but just got the CMD Studio 2a and absolutely love the feel of those wheels, specially the fact that they move the freq faster if you move them faster.... The feel is absolutely amazing. Keeping it for sure. $99 at adorama so very acceptab...
by casey1elqueo
Thu Oct 15, 2020 5:14 pm
Forum: Protocol 2 Firmware (all radios)
Topic: Out of sequence packets... Received the -ve icon
Replies: 1
Views: 513

Out of sequence packets... Received the -ve icon

Hello. Hope this is the right place to report these... Let me know. Running 2.8.9 with P2 Assuming firmware is 2.0 and not 2.0b ? The setup-general-HWselect screen shows ver 2.0 Right above the OrionMkII ID Received the -ve icon (yellow triangle inside red box) in status bar. Clicked and below is th...
by casey1elqueo
Thu Oct 15, 2020 1:17 am
Forum: Thetis
Topic: Thetis 2.8.11 Released!
Replies: 231
Views: 42747

Re: Thetis 2.8.9 Released!

Not sure if this is new on this recent release, but had clicked "x" to close the app and it just waited there.... until I realized I had the amp view window open and when I closed that window then the rest of the app closed. Again, not sure if this is new or always been the case, but I had...
by casey1elqueo
Sun Oct 11, 2020 3:01 am
Forum: Thetis
Topic: Thetis 2.8.11 Released!
Replies: 231
Views: 42747

Re: Thetis 2.8.7 Released!

For those of you who do not wish to wait for 2.8.8 (which is pending the antenna selection fixes) to get MIDI working on the 64 bit build, attached to this post is a .rar archive containing the two files you need to replace in C:\Program Files\OpenHPSDR\Thetis With those two files replaced, the 64 ...
by casey1elqueo
Tue Aug 11, 2020 10:05 pm
Forum: Thetis
Topic: What does this little red square in upper right indicate?
Replies: 10
Views: 1539

Re: What does this little red square in upper right indicate?

The little square indicates that you are dropping frames. Go to the Display tab in setup and make sure that you switch to Direct X for your driver engine. You may find that you can set your refresh rate as high as 60 fps when Direct X is enabled. The panadapter and waterfall run much more smoothly ...
by casey1elqueo
Tue Aug 11, 2020 3:18 pm
Forum: Thetis
Topic: How does one change the fill color of panadapter?
Replies: 3
Views: 817

Re: How does one change the fill color of panadapter?

More specifically, on that setup page change Grid > Background, and be sure to play with the Alpha setting. Hello and thanks for responding. I have been at that "place to start" multiple times and played with the various settings. They impact the filter and other aspects... However, given...
by casey1elqueo
Tue Aug 11, 2020 1:08 am
Forum: Thetis
Topic: How does one change the fill color of panadapter?
Replies: 3
Views: 817

How does one change the fill color of panadapter?

I saw ab5n's wonderful review (both, original and updated...) and noticed he changed the background of the panadapter to a mustard color. I have looked and looked at all the settings and can't find where this is done. Is it via editing the xml file? Many thanks! PS. It was that review that pushed me...
by casey1elqueo
Mon Aug 10, 2020 9:35 pm
Forum: Network Connections & Network Hardware
Topic: Anan 7000DLE issues.
Replies: 9
Views: 7267

Re: Anan 7000DLE issues.

Perhaps this tutorial will help ? http://www.w1aex.com/anan/anan.html#network I agree. That was very helpful. I struggled a bit on this, but was able to get SurfacePro7 -> Anan7000 to talk via direct connection via USB-C->Gigabit adapter. The config on Windows ports for priority (wired first, then ...
by casey1elqueo
Mon Aug 10, 2020 9:00 pm
Forum: Thetis
Topic: How to use two antennas "on two independent VFOs"
Replies: 2
Views: 678

Re: How to use two antennas "on two independent VFOs"

Thanks for the quick response! No, unfortunately it doesn't work that way. The design will only transmit out of one of the ANT ports That is what I suspected... Surprised as I have been exposed to so much flexibility with this radio + software as to expect that anything is possible :-) I recently st...
by casey1elqueo
Mon Aug 10, 2020 7:43 pm
Forum: Thetis
Topic: How to use two antennas "on two independent VFOs"
Replies: 2
Views: 678

How to use two antennas "on two independent VFOs"

Learning and reading... Have two antennas.. one 20m and the other 40m. Want to run the anan 7000 with Thetis displaying both at the same time and being able to tune on each sending audio to left and right ears. Is this possible? So far I figured out that one antenna must be connected to Ant1 port an...

Go to advanced search