Upgraded from 2.9.0.8 -> 2.10.0 VAC2 stopped working. Running Windows 10 build 19045 Deleted Thetis 2.908 & installed 2.10.0 - VAC1 works fine, VAC2 wouldn't work, no sound out despite trying all drivers & making sure VAC1 is off, Buffer size = 2048, 48K sample rate. On Settings -> Audio ->...

Hi Scott,
The diagram above suggests there are 3 unused DDC's that could potentially be used for additional recievers in future software releases, if Puresignal uses only one, there's still two left

best,
Taiga

Hi all, This diagram came about in an attempt to understand how RF input signals are controlled in the DLE7000 mkii using Thetis. For example, how would one assign ADC_0 and ADC_1 to the DDC recievers if you wanted to use Rx1 in Thetis for FT8 and Rx2 to monitor CW on the same band (answer: assign A...

Hi Dan,
Based on Scott's helpful info, here is a prelim draft re: how it works in a dle7000 mkii; hopefully will be of assistance with your 200D.
73, Taiga

Hi Richie,
Hope you had a great Xmas. Wishing you & your family health, happiness & prosperity for 2022, and would like to thank you for all of the superb work you've done for our SDR community, especially for those of us with Anan radios!

73,
Taiga

Hi Ritchie, Small issue: RX2 AGC gain slider on Panadapter display jumping to different position when initially adjusted: After starting Thetis with Rx2 enabled, when the Rx2 AGC gain slider is adjusted on the panadapter it doesn't follow the mouse movement, but jumps to a different position approx ...

Feature request: Zero beat button for RX2 - so one can use FT8 on RX1 while more easily monitoring morse transmissions on RX2.

Thanks Ritchie!

Allthe best,
Taiga

Hi Ritchie, Thanks for the reply. Normally use digu with a 3K filter and VAC. In order to mitigate the issue now using a 3.5K filter so that the abnormal signal falls outside the FT8 passband. Small display issue in collapsed mode: When selecting the Rx1 or RX2 VFO, the buttons in the top left of th...

Re: Odd issue w/ FT8 & new builds. When I began using the new 2.8.11 builds, noticed an odd issue w/ FT8 - increased signal on the JTDX waterfall near the edges of the filter band. In the image below, #1 = 2.0K filter width, #2 = 2.5K , #3 = 3K, #4 = custom 3.51 K filter width. Any idea what mi...

2) split up the receivers, starting with display engine, and then moving to the internals of the console (lots of work, probably weeks and weeks if not months) 3) redo all control panels to be movable, and move away from forced spread out structure of UI especially problematic on large displays The...

Hi Ritchie,
Thanks so much for the update, 21b working fine here.

Would like to put in a request to update the path illustrator to work with the Orion MkII boards / 7000dle mkii.

73,
JS

Hi, Has anyone used the Diversity feature in Thetis in order to emulate the noise function of popular phasing / noise reduction units such as the MFJ-1026, QRM-180, ANC-4, NCC-2 or Quantum phaser? If so, could you kindly reply w/ how you did it, including the type of noise antenna you used? Will The...

Thanks Scott!

73,
T

Hi, How does one create a new, uniquely named Transmit profile in Thetis? For example, would like to create a profile named "FT8-20M" for FT8 use on 20 meters. In Setup-> Transmit one can select a profile in the upper left corner, or add existing profiles by checking the "More Profile...

Thetis 2.8.11 suggested feature request / UI modification: From the "Linearity" panel -> Regarding loading saved Pure Signal parameters using the "Restore button"; Current behavior - "Correcting" indicator box remains black after saved PS parameters are loaded. Only tu...

x2 on W9BHI's comment re: the Path illustrator re: the 7000dlemkii. Having the Anan-100 type routing diagram available in Thetis 2.8.11 for the 7000dlemkii would be highly useful.

73,
Taiga.

Hi, Thanks so much for the update - Thetis 2.8.89 is working well on my 64 bit Win10 box! When attempting to install, my installer hangs at "removing shortcuts". Similar issue occurs when attempt to uninstall Thetis using the windows app. End up having to uninstall the old Thetis version w...

Hi Mike, I tried setting Thetis setup -> CAT -> "ID as" from TS-2000 to PowerSDR, and selected FlexRadio PowerSDR in JTDX rc152's radio setup; and PTT now works properly (as far as I can tell). Are there any adverse effects you know of using "PowerSDR" instead of the TS-2000 for ...

Hi Mike, It works fine using the method you described! My settings are the same as you've got listed except for: - different com port - serial data set a 8 bits, one stop bit - mode is set to data / packet. Tested it again putting all the settings exactly the same as you've got above w/ the exceptio...

Hi Mike, Thanks again for your help. Am using the TS-2000 entry. When I try controlling the rig directly using rig-ctrl.jdx as you described above, it works properly. Some further tests : 1. Did a clean install of JTDX rc152. 2. Set up a new unique rig name for this test. 3. Under "settings -> ...

Hi Mike,
Thanks so much for your kind help. Checked and JTDX is set to CAT for the PTT method. If it's working on your machine, then have probably got some configuration issue going on. Will report back if when I get it working.

73,
JS

Hi, Recently did a clean install of JTDX rc152 as recommended on the JTDX website. Using Thetis 2.70a3 and virtual serial port emulator. In JTDX under setup -> radio, the 'Test CAT' function turns green when pressed but the "PTT" function won't and returns an error "Hamlib error: Comm...

Thank you very much for your help!

73,
Mont.

Hi, Am a new user re: Thetis 2.70. Could you kindly help with these questions: 1. Is it possible to Zoom the vertical scale on the panadapter? I understand one can drag it up and down, but this doesn't zoom the scale. Would like to change it from e.g. -60 to -120 to -80 to -120. 2. On 20 meters, wou...