My Andromeda shipped via DHL thru Atlanta, GA and I had no problems. I wonder if the issue could be with FedEx?

Tom

I'd like to add to Ed's comment......and also answer your question, It is always good practice to use a dummy load for technical and practical reasons. 1) If you add a 50 ohm dummy load, take a reading and the problem remains? What does that mean?......or if the problem is eliminated? Don't forget, ...

May I suggest that you use a dummy load for issues such as this in order to take more variables out of the 'equation'.

Tom
W4TMW

Herewith are my instructions for interfacing Thetis to FLdigi using Voicemeeter (VM) and Virtual Serial Ports Emulator (VSPE). These instructions are being used with an Andromeda/Thetis 2.9.0.6 ......Protocal 1 .......Win 10. I'm not a guru on this stuff so I cannot vouch for any other radio configu...

Happy Easter to all, A quick update........all the components (Thetis, VSPE, Voicemeeter, FLDigi) are working with each-other now. A complete instruction sheet is being completed and will be posted here. I've used the Andromeda with FLDigi many times, so the settings do have persistence. :) 73, Tom ...

Scott ..... From my first post........... "and trying to setup Thetis, FLDigi (Olivia) and Voicemeeter to work together in digital mode". So here is my usual use of the Andromeda--> mostly cw and some casual ssb. However, after reading about some activity using Olivia (digital mode) with ...

Scott, I'm not following you.....here is another screenshot showing the result when I click the MIC tab to get a dropdown list....."Remove device selection" What do I need to do in order to produce a dropdown list instead of the "Remove....." popup? Where does the microphone list...

Scott and Tony, thanks for the replies. Here is the screenshot requested. Scott, I had already tried your suggestion with no luck. i'll try to send a screenshot of the VM showing the options I have to choose from there. First is the Setup>Audio https://community.apache-labs.com/download/file.php?mod...

I must be the only one with this problem. I've looked for days on this community and Voicemeeter forum without luck. I'm using an Andromeda Win 10, P1 2.9.0.6 and trying to setup Thetis, FLDigi (Olivia) and Voicemeeter to work together in digital mode. My only problem at this point is to get the Voi...

I finally got my Andromeda interfaced with my favorite logging program, ACLog (N3FJP). If anyone would like to know how I do it, I've made a little chart via the attachment herewith. 73, Tom W4TMW

Tanks to all for the help. The solution was to check ' Setup > Serial/Network/Midi/CAT > Andromeda ' and make the required settings as described below. For some reason the 'PORT' box was set to 'NONE'. I then set it to 'COM3' (the only option), which allowed me to check the 'ENABLE PANEL' box. After...

Scott, I thought about that after checking the block diagrams in the manual but wanted to let my post 'soak' for a while before looking inside the box. Eric, Yes, I did try a reset....no joy. And I've only had the radio a few days so it's all current. Phil, Thanks for the good info !!! As soon as I ...

Thanks for the reply......

Well I can't really tell because the LED lights aren't working( I didn't mention that in my post) but I've tried the button both ways with no luck. None of the buttons, knobs or LEDS are responsive.

Tom

I've been trying to correct this problem on my own but it seems to be too much for me. I've only owned this radio a short time and still trying to find my way around. I've been operating the radio ( cw only so far) via an external monitor and all is well. However, a day ago I noticed the VFO encoder...

Thanks to all who helped me.......found the problem! As Laurence mentioned, I clicked Collapse > 'Display Controls' and found ; Top Controls Band Controls Mode Controls were all checked and Andromeda Top Controls Andromeda Button Bar Were NOT checked I then checked the 2 Andromeda ( which unchecked ...

I guess the best way to express the screen I'm looking for is to look at the Andromeda manual on p.36. See the boxes along the bottom of that screen? Those are the boxes ( among other things) that were on my original bootup that is now missing. What I have now is more like the screen on a 7000DLE. I...

I've only had the radio a few days and have a problem I can't seem to solve, or find a solution for in the archives. The fist day of familiarization all went well, it booted into Protocol 2. But, into the 2nd day, I've got it booting to Protocol 1 and can't figure out how I did it or how to get it b...

FYI......

Received my Andromeda yesterday in very good condition, delivered via DHL.

73, Tom
W4TMW

A few days ago I received notification from DHL that my Andromeda should be delivered 1-12-23.
73, Tom
W4TMW

I have not received my final invoice as of today, just wondering if you have my initial preorder on record as follows.

Paid thru PayPal - Invoice#0236 - Issued: Oct 29, 2020 - Due: Oct 30, 2020

Thanks for checking into this.
73, Tom Warren
W4TMW

Steve (KA6S),

That is excellent news and thanks a million for the particulars.
Maybe there is a light at the end of the tunnel that is not a train .
73, Tom W4TMW

Hello Erik,

I've wondered the same thing but since there is no chatter here or elsewhere about the new rig, I 'assume' none have shipped yet.
It sure would be nice to see an update.

Tom
W4TMW

I just received a reply from Tony (Apache Labs support in Australia) who sent this; " I apologies for the delay in getting your order out, we are about 3-4 weeks from shipping out our first lot." Now this is an answer to my question about the 'Andromeda' and I assume his answer pertains to...

I am also wondering how things are going with shipments of the Andromeda.
My initial pre-order no. 3115 Oct. 2020. Prepayment Oct. 30, 2020....."Invoice from Apache Labs Pty Ltd (0236)"

Have any units shipped yet?

Hope all is well,
Tom, W4TMW

Abhi,

Thank you for the update. I've been wondering how things were coming along.
Have a great day

73, Tom W4TMW

Well I really screwed up. When I did the search on Github, I spelled Andromeda wrong (Andromada).

Nothing found at Github for Andromeda, only Thetis. Thanks for the help and I'll keep looking there for updates.
I sent a note earlier to 'Support' but I guess those guys are busy getting rigs out the door

Take care, Tom- W4TMW

Thanks, I'll check it out. 73, Tom W4TMW

Does anyone know if there is a prelim. manual available yet?
Thanks, Tom W4TMW

Thanks for the prompt reply. I'm looking forward to a great product.
Merry Christmas and 73, Tom W4TMW