Bingo Dave!!

My mistake, the voltage button has been moved and the voltage output was only 9V!!

Now with 13,8V all is ok!!

Thank you so much!

Best 73's
Patrick
F4EGA

Hi Dave,

I have been using thetis 2.8.11 since its release with Orion 1.9.

Everything worked well so far and overnight the power is divided by 2 !!

I recalibrated the PA but it's the same.

73
Patrick
F4EGA

Hi all, I had not used this tx for a little while and this morning I decided to turn it on, strangely I had half power, I tested on all bands and on a dummy load, for a tune at 100w i have 50w on all bands. I reset the database but without success, the problem is the same. Do you have any idea where...

Scott,
I ordered the 2N7002K transistor and will change it one of these days.
I don't understand how it could have been damaged!
Thanks a lot for your help.
73
Patrick
F4EGA

Hi Scott,
With a TS-590 I have 12.3V in RX and 0V in TX, when I switch to the ANAN I have 3.45V in RX and the same in TX, the RCA cable disconnected from the ANAN I have 12.3V.
73
Patrick
F4EGA

HI all, I have been using an ANAN 200D and an ACOM 1000 amplifier for over a year without any problem, this afternoon the amplifier no longer switched to TX. I tested the RCA PTT OUT jack on the ANAN with a continuity tester and got nothing at all when in PTT. Do you have an idea? I tested the ampli...