Search found 16 matches

by ron4094
Mon Nov 02, 2020 1:11 am
Forum: Diversity Operations (PowerSDR & Thetis)
Topic: Diversity Suddenly Stopped Working
Replies: 2
Views: 330

Re: Diversity Suddenly Stopped Working

Of course I tried turning the radio off and on and reloading the software but what I didn't try was to re-boot the computer which I just did. Diversity is now working. Thanks.

Ron
WB2RON
by ron4094
Sun Nov 01, 2020 9:14 pm
Forum: Diversity Operations (PowerSDR & Thetis)
Topic: Diversity Suddenly Stopped Working
Replies: 2
Views: 330

Diversity Suddenly Stopped Working

Diversity suddenly stopped working on my 7000dle mk2. When I engage it the receiver goes silent and the panadapter freezes. I am using version 2.8.11 of Thetis but I also tried it on version 2.6.9 with the same result. RX2 still works fine by itself but not with diversity. If I turn on diversity wit...
by ron4094
Fri Sep 25, 2020 4:42 pm
Forum: Thetis
Topic: CFC Stays On with Over-the-Air Record Playback
Replies: 3
Views: 427

CFC Stays On with Over-the-Air Record Playback

I noticed that when playing back a recording over the air, the TX EQ is disabled during playback as it should be but that the CFC is still enabled which then alters the over-the-air playback of the recording. You have to manually uncheck the CFC boxes to correct this. I am using Thetis V2.7.0. Perha...
by ron4094
Sat Sep 12, 2020 11:32 pm
Forum: Forum Problems, Help & Suggestions
Topic: User Name Change
Replies: 1
Views: 324

User Name Change

I would like to change my username to my call letters, WB2RON. Is this possible?
by ron4094
Tue Jun 16, 2020 11:37 pm
Forum: Thetis
Topic: Wave File Options Menu Missing
Replies: 11
Views: 1754

Re: Wave File Options Menu Missing

I just upgraded to 2.7.0 a3 and the options menu is there. Thanks everyone.

Ron
WB2RON
by ron4094
Tue Jun 09, 2020 5:27 pm
Forum: Thetis
Topic: Noise Bump on 60M Ch 2
Replies: 2
Views: 588

Re: Noise Bump on 60M Ch 2

You're correct. With the antenna connected on 60 meters the bump is barely noticable above the noise floor. I just think that it's strange that spurs were not cleaned up prior to final design release. Anyway, this is certainly not an operating issue for me.

Ron
WB2RON
by ron4094
Mon Jun 08, 2020 8:40 pm
Forum: Thetis
Topic: Noise Bump on 60M Ch 2
Replies: 2
Views: 588

Noise Bump on 60M Ch 2

I switched over to 60 meters for the first time on my Anan 7000 dle mk2 and noticed what appears to be a rather substantial noise bump on Ch 2. It appears to be FMing slightly and is also visible without my antenna connected. The attached image was taken with my dummy load connected.

Ron
WB2RON
by ron4094
Mon Jun 08, 2020 1:35 am
Forum: Thetis
Topic: Wave File Options Menu Missing
Replies: 11
Views: 1754

Re: Wave File Options Menu Missing

Thanks Joe. I'll check it out again when I finally upgrade to 2.7.0. Meanwhile, I still use it as is. I record a file then listen to the transmit playback of the file using the monitor function while transmitting into my dummy load. To listen at different bandwidths, I simply change my transmit band...
by ron4094
Sat Jun 06, 2020 5:44 pm
Forum: Thetis
Topic: Wave File Options Menu Missing
Replies: 11
Views: 1754

Re: Wave File Options Menu Missing

Scale was set to 100%. If I set it to 150% everything on the screen is overblown but I still don't get the Options Menu in Wave File Recorder. I also tried maximizing the Wave Files Control window an saw no difference. By the way, I see the following note in the Thetis User Manual: Options for wavef...
by ron4094
Sat Jun 06, 2020 1:12 pm
Forum: Thetis
Topic: Wave File Options Menu Missing
Replies: 11
Views: 1754

Re: Wave File Options Menu Missing

Here is the snapshot.

Ron
WB2RON
by ron4094
Fri Jun 05, 2020 6:57 pm
Forum: Thetis
Topic: Wave File Options Menu Missing
Replies: 11
Views: 1754

Wave File Options Menu Missing

I recently installed Thetis V2.6.9 with Protocol 2 v1.9 with Windows 7 and it appears to be working properly. However, the options menu is missing from the wave file recorder. PowerSDR mrx did have the options menu. Any ideas?

Ron
WB2RON
by ron4094
Thu Jun 04, 2020 2:33 pm
Forum: Thetis
Topic: Fatal Error After Database Import
Replies: 6
Views: 1069

Re: Fatal Error After Database Import

Thanks everyone. Thetis is now operating properly after correcting the imported database. I have now gone through a complete calibration of transmit power levels, receive calibration level (-73dbm) and on -the-air checks and have found no issues at this time. I have also imported my transmit profile...
by ron4094
Wed Jun 03, 2020 8:13 pm
Forum: Thetis
Topic: Fatal Error After Database Import
Replies: 6
Views: 1069

Re: Fatal Error After Database Import

I just noticed that there is an archive database folder in the Thetis directory. I replaced database.xml with this file and I no longer get the fatal error. I will now check out the radio and see if there are any other issues.

Thanks,
Ron
WB2RON
by ron4094
Wed Jun 03, 2020 7:59 pm
Forum: Thetis
Topic: Fatal Error After Database Import
Replies: 6
Views: 1069

Re: Fatal Error After Database Import

Since this was a new install, the database that was in the Thetis folder is the default database, not the one that I imported but I still get the same fatal error message. I suspect that it may work if I do a clean install where the computer goes through the optimization routine but I don't know how...
by ron4094
Wed Jun 03, 2020 6:47 pm
Forum: Thetis
Topic: Fatal Error After Database Import
Replies: 6
Views: 1069

Fatal Error After Database Import

Today I installed the latest versions of Thetis and Protocol V2 into my Anan 7000dle mk2 with no issues. The radio appeared to be working properly. I then imported my saved database from Open HPSDR and then got a Fatal Error message. At this point I deleted Thetis and reinstalled it and still got th...
by ron4094
Sun May 24, 2020 2:49 pm
Forum: Thetis
Topic: AM stereo?
Replies: 13
Views: 2745

Re: AM stereo?

Rob, You mentioned that the Q effect on AM/SAM has always been there going back to the Flex version of PowerSDR. During the 12 years that I used my Flex 1000 I never noticed any change in audio quality when narrowing one edge of the panadapter on AM. I used many versions of Power SDR over the years ...

Go to advanced search