Search found 44 matches

by Dave30019
Thu Feb 01, 2024 3:34 pm
Forum: Digital Mode, Rig Control & Logging Software
Topic: Log4OM not receiving CW mode info
Replies: 3
Views: 1048

Re: Log4OM not receiving CW mode info

Problem solved. Thanks for the info Scott, the issue was in Thetis. I stared to poke around the Network/TCI screen and Enabled 'CWL/CWU becomes CW (out). CW is now showing up in Log4om when going into CW mode on Thetis. Thanks for your help, it got me think about how the data was transferred to Log4...
by Dave30019
Wed Jan 31, 2024 9:30 pm
Forum: Digital Mode, Rig Control & Logging Software
Topic: Log4OM not receiving CW mode info
Replies: 3
Views: 1048

Log4OM not receiving CW mode info

I was working the 'WWA' event this past week and I noticed my logging S/W was not changing to CW mode. It would change to USB, LSB, AM, FM, FT8 and FT4 but not CW. I've recently started using CMaudio with a Behringer UMC202HD and ASIO driver. I also know that I no longer have cw sidetone. Could this...
by Dave30019
Sun Dec 24, 2023 8:53 pm
Forum: Digital ("Virtual") Audio
Topic: cmASIO feature in Thetis
Replies: 232
Views: 78415

Re: cmASIO feature in Thetis 2.10.3.5 pre 3

Thanks Scott,

For the explanation, guess I'll just use my 7300 for cw. I only chase dxpeditions for cw contacts anyway. Arthritis is too bad to use a key anymore.

Dave
k4em
by Dave30019
Sun Dec 24, 2023 8:02 pm
Forum: Digital ("Virtual") Audio
Topic: cmASIO feature in Thetis
Replies: 232
Views: 78415

Re: cmASIO feature in Thetis 2.10.3.5 pre 3

No side tone in CW using CWX & 'SEMI' after Thetis and cmASIO upgrade. I do have sidetone if CW is set to QSK and also pressing TUN but not in SEMI mode. I upgraded to final release 2.10.3.5 and tested SSB & digital modes, all ok. I'm using a Behringer UMC202-HD. I then configured cmASIO per...
by Dave30019
Mon Aug 07, 2023 4:07 pm
Forum: G2 Operating System & Applications
Topic: New G2 Points of Interest etc
Replies: 13
Views: 1803

Re: New G2 Points of Interest etc

These work very well for supplying phantom power to a mic. There are other brands available as well.
https://www.amazon.com/Nady-SMPS-1X-1-C ... B000XUUXB8

Dave
k4em
by Dave30019
Sun May 28, 2023 9:40 am
Forum: PC's & Homebrew Hardware
Topic: New PC build with LED lighting?
Replies: 1
Views: 2119

New PC build with LED lighting?

I've noticed the new PC cases, parts, etc all seem to have LED lighting. Has anyone noticed any birdies or other issues using the LED lighting? I'm building a new PC and the case has fans with LED's, not sure if I should go with the LEDs connected. The dimms, and cpu fan do not have LEDs just the 3 ...
by Dave30019
Mon Apr 18, 2022 12:36 pm
Forum: Thetis
Topic: Thetis v2.9.0 - Updates and Issues
Replies: 431
Views: 109098

Re: Thetis v2.9.0 - Updates and Issues

TCI is now working with RFKit amp & Thetis.

The Best just got Better.

Thanks Ritchie,
Dave
k4em
by Dave30019
Thu Apr 07, 2022 1:45 pm
Forum: Amplifiers & Tuners
Topic: TCI with RF Kits RF2K amplifier
Replies: 61
Views: 41597

Re: TCI with RF Kits RF2K amplifier

I switched off the amp and the Client count dropped to ZERO, took almost 2 min.

When I had EESDR3 up, TCI enabled, LOG enable. I tried several scenarios to get some info to show up in the log, it remained empty.

Dave
k4em
by Dave30019
Thu Apr 07, 2022 1:16 pm
Forum: Amplifiers & Tuners
Topic: TCI with RF Kits RF2K amplifier
Replies: 61
Views: 41597

Re: TCI with RF Kits RF2K amplifier

Ernst,

Also, toggling 'enable' causing the amp to revert to UNIV and the message 'no TCI available' displays. Toggling 'enable' it goes back to TCI. All looks OK to me.

Dave
k4em
by Dave30019
Thu Apr 07, 2022 1:13 pm
Forum: Amplifiers & Tuners
Topic: TCI with RF Kits RF2K amplifier
Replies: 61
Views: 41597

Re: TCI with RF Kits RF2K amplifier

Ernst,

I downloaded the EESDR s/w and setup per your instructions and it worked. My RF2K-S amp is now showing TCI, nothing showed up in log.

Dave
k4em
by Dave30019
Wed Apr 06, 2022 4:24 pm
Forum: Amplifiers & Tuners
Topic: TCI with RF Kits RF2K amplifier
Replies: 61
Views: 41597

Re: TCI with RF Kits RF2K amplifier

I have both Thetis & RF2K-S amp set to my PC ip and port is 50001. It is configured like Ernest's example picture's. When cycling thru the CAT setup screen I never get TCI to appear in upper right hand corner of amp as shown in Ernest's amp front panel picture. The message is always 'no TCI avai...
by Dave30019
Wed Apr 06, 2022 2:16 pm
Forum: Amplifiers & Tuners
Topic: TCI with RF Kits RF2K amplifier
Replies: 61
Views: 41597

Re: TCI with RF Kits RF2K amplifier

I guess I should have said that UNIV seems to be the default selection. TCI is always shown as 'No TCI available' on amp front panel. I thought the log data was promising as it did shows commands being sent from Thetis. But, when I change the status in the AMP to TCI, Thetis reacted to this by sendi...
by Dave30019
Wed Apr 06, 2022 11:03 am
Forum: Amplifiers & Tuners
Topic: TCI with RF Kits RF2K amplifier
Replies: 61
Views: 41597

Re: TCI working & not working

Ramdor, Yes I was using 127.0.0.1, I changed it to my PC ip address. Still did not work. I did not start my logging program or JTDX, both off while testing. I started in Admin mode, clicked on 'Firewall' setting. I rebooted just to make sure all started fresh, did not work. In the rfkit amp there is...
by Dave30019
Tue Apr 05, 2022 4:36 pm
Forum: Amplifiers & Tuners
Topic: TCI with RF Kits RF2K amplifier
Replies: 61
Views: 41597

Re: TCI working & not working

On your RF2K amplifier is the common DC terminal tied to the chassis?

I have no idea, maybe they would know on the RFKit forum.

Dave
k4em
by Dave30019
Tue Apr 05, 2022 1:13 pm
Forum: Amplifiers & Tuners
Topic: TCI with RF Kits RF2K amplifier
Replies: 61
Views: 41597

TCI with RF Kits RF2K amplifier

This is just an FYI post, I'm not complaining just passing along some info. Just installed 2.9.0.3 and all seems to be fine. I configured TCI with Log4OM & JTDX, the CAT I/F is working. I turned on TCI logging and both Log4om & JTDX are sending/receiving commands. The problem is my RF2K-S am...
by Dave30019
Thu Mar 31, 2022 2:06 pm
Forum: Digital Mode, Rig Control & Logging Software
Topic: TCI & F/H mode in JTDX not working.
Replies: 22
Views: 6489

Re: TCI & F/H mode in JTDX not working.

I'm using JTDX ver 2.2.159; Thetis ver. 21k9. I'm using audio VAC, I understand that TCI audio is not implemented in Thetis yet. JTDX & Thetis runs fine in regular mode just not F/H mode when TCI is configured. Thanks for the info. Dave k4em Edit: Sorry, I switched back to Virtual serial port ca...
by Dave30019
Thu Mar 31, 2022 12:44 pm
Forum: Digital Mode, Rig Control & Logging Software
Topic: TCI & F/H mode in JTDX not working.
Replies: 22
Views: 6489

TCI & F/H mode in JTDX not working.

I implemented TCI in Thetis (21k9) and successfully setup Log4OM & JTDX and have been running fine for 2 weeks. Yesterday I tried F/H mode for the first time and it did not work. I switched back to VAC and it worked fine in F/H mode. Setup with TCI; in F/H it goes into transmit for about 1 sec a...
by Dave30019
Fri Mar 18, 2022 11:39 am
Forum: Digital Mode, Rig Control & Logging Software
Topic: TCI - Transceiver Control Interface: is it the future?
Replies: 16
Views: 5375

Re: TCI - Transceiver Control Interface: is it the future?

Does the TCI implemented in Thetis have PTT control. I know it has CAT but is there PTT control too.

Dave
k4em
by Dave30019
Sun Feb 20, 2022 12:11 pm
Forum: Digital Mode, Rig Control & Logging Software
Topic: TCI - Transceiver Control Interface: is it the future?
Replies: 16
Views: 5375

Re: TCI - Transceiver Control Interface: is it the future?

I'd like to see the full TCI implemented into Thetis; Audio & CAT. I use a RF2K-S amp which has TCI client, Log4OM & JTDX all have TCI capability. I am waiting for TCI in Thetis. I'm not really interested in trying the experimental version's being used right now. I'll patiently wait for the ...
by Dave30019
Wed Oct 20, 2021 6:18 pm
Forum: Thetis
Topic: ADC1 overload when monitoring on ANAN 7000 DLE MKII
Replies: 29
Views: 9087

Re: ADC1 overload when monitoring on ANAN 7000 DLE MKII

This brings a question to mind. What are all the defaults supposed to be after an install. On my install both were off.

Dave
k4em
by Dave30019
Mon Aug 16, 2021 5:15 pm
Forum: Protocol 2 Firmware (all radios)
Topic: OLD 7000/8000 Orion MKII Protocol 2 Firmware Topic
Replies: 185
Views: 149383

Re: New 7000/8000 Orion MKII Protocol 2 Firmware Topic

Scot, My bad, when you announced 'UPDATE FW 2.8.18 14 AUG 2021' and further down it said, Thetis build 2.8.11 21f will show the full firmware version number , etc. I thought the new FW included 21f. Which means I misunderstood. I suppose i'll be ok to leave it as is, the rig seems to be running fine...
by Dave30019
Mon Aug 16, 2021 5:07 pm
Forum: Protocol 2 Firmware (all radios)
Topic: OLD 7000/8000 Orion MKII Protocol 2 Firmware Topic
Replies: 185
Views: 149383

Re: New 7000/8000 Orion MKII Protocol 2 Firmware Topic

Scott,
No I did not install 21f, just the 2.1.18 FW which went smoothly.

Dave
k4em
by Dave30019
Mon Aug 16, 2021 3:35 pm
Forum: Protocol 2 Firmware (all radios)
Topic: OLD 7000/8000 Orion MKII Protocol 2 Firmware Topic
Replies: 185
Views: 149383

Re: New 7000/8000 Orion MKII Protocol 2 Firmware Topic

OK, I updated the FW to 2.1.18 on my 7K DLE MKII, Setup/General/HW now shows ver 2.1. I see no new buttons or changes. I also changed my Skin & buttons to Clarity N from W1AEX site. Does FW 2.1.18 include the 21f changes? Is there a Change Notice document that lists all the changes to 2.1.18? Da...
by Dave30019
Sat Dec 05, 2020 1:32 pm
Forum: Digital Mode, Rig Control & Logging Software
Topic: FT8, now have birdies on Xmit
Replies: 1
Views: 1935

FT8, now have birdies on Xmit

I powered off the SDR 2 weeks ago and I used my IC7300 for a couple of weeks. I powered the 7K DLE MKII back on and started up FT8. I immediately noticed the birdies (marked in RED) on my signal. The Green dot is my normal looking signal. I have never had these before on FT8 using PowerSDR, Thetis a...
by Dave30019
Fri Oct 30, 2020 6:58 pm
Forum: Keys, Keyers, Paddles & Bugs
Topic: CW setup in Thetis 2.8.11?
Replies: 6
Views: 6540

Re: CW setup in Thetis 2.8.11?

Rob, I'm using the K2GX 'World Time' skin. I installed this in late March about 2 weeks after I received the radio and installed Thetis. I don't recall installing any separate buttons or sliders. I just noticed in your example on your page, the K2GX 'World Time' skin says 'PowerSDR' at the top, is t...
by Dave30019
Thu Oct 29, 2020 10:39 pm
Forum: Keys, Keyers, Paddles & Bugs
Topic: CW setup in Thetis 2.8.11?
Replies: 6
Views: 6540

Re: CW setup in Thetis 2.8.11?

Hi Scott,

7K DLE MKII, firmware latest I could find 2.0b & 2.8.11 64 bit Thetis.

Dave
by Dave30019
Wed Oct 28, 2020 2:13 pm
Forum: Keys, Keyers, Paddles & Bugs
Topic: CW setup in Thetis 2.8.11?
Replies: 6
Views: 6540

CW setup in Thetis 2.8.11?

Can someone provide some screen shots of a transmitted cw signal or video? I have my 7K DLE mkII setup for semi-CW, I just want to see what a clean signal should look like. Also, some cw settings examples, how do you have your rig set? I followed the ver 1.1 manual and all seems to work. Also should...
by Dave30019
Sun Oct 11, 2020 9:45 am
Forum: Thetis
Topic: VAC resampler instability at startup
Replies: 22
Views: 9118

Re: VAC resampler instability at startup

With Thetis 2.7(a3) I also would get startup re-sampler errors (overflows/underflows). To correct these, I un-check 'Buffer latency'/IN/manual, they would reset to zero and I re-checked 'Buffer Latency'/manual. This may last an hour or a couple of hours but they always came back. I updated yesterday...
by Dave30019
Sat Oct 10, 2020 11:01 am
Forum: Thetis
Topic: Thetis 2.8.11 Released!
Replies: 232
Views: 231832

Re: Thetis 2.8.7 Released!

Can I import my latest database from my 2.7(a3) version. Or do I have to reconfigure from scratch with the 64 bit version? I successfully installed 2.8.7 so I want to proceed cautiously. Dave k4em EDIT: I found some screen shots I had saved on a USB stick, so I just re-entered my settings and it see...
by Dave30019
Tue Aug 25, 2020 11:15 am
Forum: Thetis
Topic: 2.7.0
Replies: 190
Views: 117577

Re: 2.7.0

Where is the latest firmware for Thetis 2.7a3? Is there a list of fixes the different firmware versions address?

Dave
k4em

Go to advanced search