Search found 22 matches

by kd4jm
Fri Mar 27, 2020 12:46 am
Forum: Protocol 2 Firmware (all radios)
Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
Replies: 109
Views: 16815

Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic

Hi Rick,

Just wanted to let you know the pre-20 is working like a champ, I’ve tried it on 160 thru 10 meter with 192 and 384 sample rate with no issue at all, using PS with my Anan 100 gray face and running Thetis 2.7.0 a2.

Again congrats!!

Jorge kd4jm
by kd4jm
Wed Mar 25, 2020 2:30 pm
Forum: Protocol 2 Firmware (all radios)
Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
Replies: 109
Views: 16815

Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic

Hi Rick,

After doing more testing on Pre18 I found out that from 160 thru 40 meter PS it's working great on two tone and ssb,
On 20 thru 10 meter I'm still getting in/out on PS.

Thank you so much!

Anan 100 gray face: Thetis 2.7.0 A2

Jorge KD4JM
by kd4jm
Tue Mar 24, 2020 9:37 pm
Forum: Protocol 2 Firmware (all radios)
Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
Replies: 109
Views: 16815

Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic

Hi Rick & everyone,

So far my Anan 100 pre18 is runnig ok on SSB and 2 tone test, I will continue testing some more tonight.

Jorge...

Anan 100 2tone PS on_LI.jpg
Anan 100 2tone PS on_LI.jpg (2.04 MiB) Viewed 2511 times


Anan 100 2tone PS off.jpg
Anan 100 2tone PS off.jpg (1.98 MiB) Viewed 2511 times


Anan 100 SSB PS on_LI.jpg
Anan 100 SSB PS on_LI.jpg (1.91 MiB) Viewed 2511 times


Anan 100 SSB PS off_LI.jpg
Anan 100 SSB PS off_LI.jpg (1.93 MiB) Viewed 2511 times
by kd4jm
Tue Mar 24, 2020 3:19 pm
Forum: Protocol 2 Firmware (all radios)
Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
Replies: 109
Views: 16815

Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic

kd4jm wrote:Hi Rick,

I just tested pre18 firmware and so far is working like a champ. Here’s my video below congrats!!

https://photos.app.goo.gl/QzctXTsMVzKUBN1G6

Thanks to the rest of the group, I don’t think this could’ve been possible without everyone feedback.

Jorge KD4JM


My rig Anan 100
by kd4jm
Tue Mar 24, 2020 12:32 pm
Forum: Protocol 2 Firmware (all radios)
Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
Replies: 109
Views: 16815

Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic

Hi Rick,

I just tested pre18 firmware and so far is working like a champ. Here’s my video below congrats!!

https://photos.app.goo.gl/QzctXTsMVzKUBN1G6

Thanks to the rest of the group, I don’t think this could’ve been possible without everyone feedback.

Jorge KD4JM
by kd4jm
Sun Mar 22, 2020 11:22 pm
Forum: Protocol 2 Firmware (all radios)
Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
Replies: 109
Views: 16815

Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic

Hi Rick,

When the radio warms up the correction stop working, but the feedback continues to work hot or cold.
It never did that before. so I think you are heading in the right direction.
Thanks for the update, you are almost there.

Jorge
by kd4jm
Thu Mar 19, 2020 1:17 pm
Forum: Protocol 2 Firmware (all radios)
Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
Replies: 109
Views: 16815

Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic

Hi Rick,

Just wanted to say I agree with Andy 100% and I really appreciate everthing you do for trying to get to the botom of this issue.

Thanks....

Jorge
by kd4jm
Wed Mar 18, 2020 1:33 am
Forum: Protocol 2 Firmware (all radios)
Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
Replies: 109
Views: 16815

Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic

Hi Rick,

I tied pre14 with the amp on and also on bypass(cross talk) with 192/384 sample rate
but I'm still getting some in/out PS and also now SEQ errors.

Thanks for the update.

Jorge
Anan 100 Thetis 2.7.0 (a2)
by kd4jm
Sat Mar 14, 2020 1:12 pm
Forum: Protocol 2 Firmware (all radios)
Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
Replies: 109
Views: 16815

Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic

Hi Rick,

My results are the same as Andy on both pre13 verison.

73,

Jorge
by kd4jm
Sat Mar 14, 2020 2:25 am
Forum: Protocol 2 Firmware (all radios)
Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
Replies: 109
Views: 16815

Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic

Rick,

Should I delete my database before I try pre13 100T ?

Jorge
by kd4jm
Sat Mar 14, 2020 1:27 am
Forum: Protocol 2 Firmware (all radios)
Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
Replies: 109
Views: 16815

Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic

Hi Rick,

Here is a video on how my Anan 100 PS with pre12 is working for me, if I switch to portocol 1 it work every time.

https://photos.google.com/photo/AF1QipM ... f9wDuyqXo3

73,
Jorge kd4jm
by kd4jm
Fri Mar 13, 2020 2:44 am
Forum: Protocol 2 Firmware (all radios)
Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
Replies: 109
Views: 16815

Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic

Hey Andy and ALL, I should have described my setup more accurately. My ANAN-10 has been modified via K19 so that it doesn't ground and the signal from the SWR network same as the ANAN-200/7000 Tx signal is fed back for PS running 'barefoot'. Never-the-less, I am able to reproduce your problem with ...
by kd4jm
Tue Mar 10, 2020 11:34 pm
Forum: Protocol 2 Firmware (all radios)
Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
Replies: 109
Views: 16815

Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic

Tnx guys for your testing a great feedback. pre9 works flawlessly on my ANAN-10. I can't make PS misbehave! This next test image I added a reset to the rx0 & rx1 fifos on a transition of PTT with the thought that rx0 & rx1 may get out of sync on PTT transitions. Purely experimental, but loo...
by kd4jm
Tue Mar 10, 2020 2:27 am
Forum: Protocol 2 Firmware (all radios)
Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
Replies: 109
Views: 16815

Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic

This firmware image changes the DAC clock to 45 degrees of the ADC. The last image changed from 90 degrees to zero, and seemed to make a difference towards PS being more stable. Just getting some data points, tnx for trying and reporting back! https://www.dropbox.com/s/oxylrph2ggi4yks/Hermes_Protoc...
by kd4jm
Mon Mar 09, 2020 1:05 am
Forum: Protocol 2 Firmware (all radios)
Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
Replies: 109
Views: 16815

Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic

Hi Jorge, Tnx for giving it a try. Here's another one to try. This time I've changed the clock feeding the DAC. It's no longer 90 degrees out of phase with the ADC clock. Still working for me but I do notice that PS is locked in better: https://www.dropbox.com/s/082gk2ov37egglj/Hermes_Protocol_2_v1...
by kd4jm
Sun Mar 08, 2020 4:25 pm
Forum: Protocol 2 Firmware (all radios)
Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
Replies: 109
Views: 16815

Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic

I've been experimenting with timings (mostly ethernet phy) trying to get PS more stable on all bands. This one is working pretty well from 160-6 mtrs on my ANAN-10. Please give it a try and report back when you have a chance: https://www.dropbox.com/s/1ea2d62xlye4f1k/Hermes_Protocol_2_v10.8_pre6.rb...
by kd4jm
Tue Feb 11, 2020 11:27 pm
Forum: Protocol 2 Firmware (all radios)
Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
Replies: 109
Views: 16815

Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic

DH1KLM wrote:Thanks for the new Version.
For me the firmware in Thetis 2.6.9 and 2.7.0 is correctly reported as 10.8.
No further tests have been carried out so far.



Hi Sigi,
Have you tested to see if your pure signal is working correctly with this new version 10.8, thanks.

Jorge kd4jm
by kd4jm
Tue Feb 11, 2020 1:11 pm
Forum: Protocol 2 Firmware (all radios)
Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
Replies: 109
Views: 16815

Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic

Hi Jorge, Could you try this updated FW. It fixes the FW version and has some timing changes for PS: https://www.dropbox.com/s/5ssofoegz0qcov6/Hermes_Protocol_2_v10.8_pre5.rbf?dl=0 Tnx -Rick / N1GP Hi Rick, The FW is now showing up correctly, PS is working much better but we still have some in and ...
by kd4jm
Mon Feb 10, 2020 6:18 pm
Forum: Protocol 2 Firmware (all radios)
Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
Replies: 109
Views: 16815

Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic

This is for the 16-bit Hermes platforms only, which are the ANAN-10 and ANAN-100. This is NOT for the 14-bit Hermes platforms (10E, 100B). UPDATE 10.8_pre4 10 Feb 2020 Additional bug fixes including transverter operation, PTT fixes and timing adjustments. Metis_Hermes_Protocol_2_v10.8_pre4.rbf Prev...
by kd4jm
Fri Nov 08, 2019 9:59 pm
Forum: Protocol 2 Firmware (all radios)
Topic: Hermes (Anan10/100) Problem with PureSignal
Replies: 7
Views: 3021

Re: Hermes (Anan10/100) Problem with PureSignal

Hi Daniel,

Yes, if you change band or power you need to redo the process again, hopefully we will get a updated firmware soon.

73's

Jorge KD4JM
by kd4jm
Fri Nov 08, 2019 12:03 am
Forum: Protocol 2 Firmware (all radios)
Topic: Hermes (Anan10/100) Problem with PureSignal
Replies: 7
Views: 3021

Re: Hermes (Anan10/100) Problem with PureSignal

To All,

Anan 100 Protocol 2(FW10.7) PureSignal manually work around that seems to be working for me.

See video

https://youtu.be/zx8Gfu_cjxA

Jorge KD4JM
by kd4jm
Fri Oct 25, 2019 1:06 am
Forum: Thetis
Topic: 2.6.8
Replies: 565
Views: 92361

Re: 2.6.8

I’m running Anan 100 on v 2.6.8 with FW 10.7 having problems getting PS to work all the time, it works great on protocol 1 any suggestions.

thanks,

Jorge kd4jm

Go to advanced search