Here my Screenshots about Tests on a Dummyload with my Hermes Board with the last pre19
Search found 6 matches
- Wed Mar 25, 2020 8:34 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
- Replies: 124
- Views: 159158
- Tue Mar 24, 2020 9:32 am
- Forum: Protocol 2 Firmware (all radios)
- Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
- Replies: 124
- Views: 159158
Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
v10.8_pre18 has no Harmonics and no Noise, checked it with my Spectrumanalyser . Pure Signal 2-Tone: it works , when turn on the PS-A IMD3 will be better ,but in the Ampview looks totally broken. 2-TONE pre18.PNG Phone: if i turn on PS-A Correcting and Feedback comes fine (green Blinking ) but IMD3...
- Tue Mar 24, 2020 8:07 am
- Forum: Protocol 2 Firmware (all radios)
- Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
- Replies: 124
- Views: 159158
Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
Hi Rick, in pre9 PS works not , only sometimes. 50:50. with my Screenshot of pre9 i would only say that there are no Harmonics and no Noise . About PS: I can't test PS with pre15 for a long time because my power amplifier drops out because of the harmonics, and I use a very narrow band antenna (symm...
- Mon Mar 23, 2020 8:04 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
- Replies: 124
- Views: 159158
Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
Hi All, Because of SWR problems and narrowband antenna I measured Hermes/ANAN10. I have measured harmonics, these are available since v10.8_pre13. I have measured them with the spectrum analyzer, because of the harmonics there are SWR problems and maybe problems with PureSignal . Hermes Tune PRE15.p...
- Fri Nov 08, 2019 5:55 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: Hermes (Anan10/100) Problem with PureSignal
- Replies: 7
- Views: 8786
Re: Hermes (Anan10/100) Problem with PureSignal
To All, Anan 100 Protocol 2(FW10.7) PureSignal manually work around that seems to be working for me. See video https://youtu.be/zx8Gfu_cjxA Jorge KD4JM Hello Jorge :) yes that's right, if it works and you make a SingleCalibration it works. However, if you do QSY (Band or Frequency) a new SingleCali...
- Wed Nov 06, 2019 6:06 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: Hermes (Anan10/100) Problem with PureSignal
- Replies: 7
- Views: 8786
Hermes (Anan10/100) Problem with PureSignal
Hello , I use the Hermes SDR (FW10.7) with Thetis 2.6.9a1. I found some bugs there that were also present in 2.6.8. I found the following bugs: -PureSignal stops : Feedback and correction (green) disappear, all parameters are set as in PowerSDR 3.4.9( worked great there) . Feedback and Correcting ar...