Search found 6 matches

by DL7GT_Daniel
Wed Mar 25, 2020 8:34 pm
Forum: Protocol 2 Firmware (all radios)
Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
Replies: 124
Views: 151257

Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic

Here my Screenshots about Tests on a Dummyload with my Hermes Board with the last pre19

2-Tone ohne PS.PNG
2-Tone ohne PS.PNG (556.25 KiB) Viewed 30473 times


2-TONE mit PS.PNG
2-TONE mit PS.PNG (569.93 KiB) Viewed 30473 times


ssb ohne PS.PNG
ssb ohne PS.PNG (698.37 KiB) Viewed 30473 times


SSB mit PS.PNG
SSB mit PS.PNG (652.86 KiB) Viewed 30473 times
by DL7GT_Daniel
Tue Mar 24, 2020 9:32 am
Forum: Protocol 2 Firmware (all radios)
Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
Replies: 124
Views: 151257

Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic

v10.8_pre18 has no Harmonics and no Noise, checked it with my Spectrumanalyser . Pure Signal 2-Tone: it works , when turn on the PS-A IMD3 will be better ,but in the Ampview looks totally broken. 2-TONE pre18.PNG Phone: if i turn on PS-A Correcting and Feedback comes fine (green Blinking ) but IMD3...
by DL7GT_Daniel
Tue Mar 24, 2020 8:07 am
Forum: Protocol 2 Firmware (all radios)
Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
Replies: 124
Views: 151257

Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic

Hi Rick, in pre9 PS works not , only sometimes. 50:50. with my Screenshot of pre9 i would only say that there are no Harmonics and no Noise . About PS: I can't test PS with pre15 for a long time because my power amplifier drops out because of the harmonics, and I use a very narrow band antenna (symm...
by DL7GT_Daniel
Mon Mar 23, 2020 8:04 pm
Forum: Protocol 2 Firmware (all radios)
Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
Replies: 124
Views: 151257

Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic

Hi All, Because of SWR problems and narrowband antenna I measured Hermes/ANAN10. I have measured harmonics, these are available since v10.8_pre13. I have measured them with the spectrum analyzer, because of the harmonics there are SWR problems and maybe problems with PureSignal . Hermes Tune PRE15.p...
by DL7GT_Daniel
Fri Nov 08, 2019 5:55 pm
Forum: Protocol 2 Firmware (all radios)
Topic: Hermes (Anan10/100) Problem with PureSignal
Replies: 7
Views: 8650

Re: Hermes (Anan10/100) Problem with PureSignal

To All, Anan 100 Protocol 2(FW10.7) PureSignal manually work around that seems to be working for me. See video https://youtu.be/zx8Gfu_cjxA Jorge KD4JM Hello Jorge :) yes that's right, if it works and you make a SingleCalibration it works. However, if you do QSY (Band or Frequency) a new SingleCali...
by DL7GT_Daniel
Wed Nov 06, 2019 6:06 pm
Forum: Protocol 2 Firmware (all radios)
Topic: Hermes (Anan10/100) Problem with PureSignal
Replies: 7
Views: 8650

Hermes (Anan10/100) Problem with PureSignal

Hello , I use the Hermes SDR (FW10.7) with Thetis 2.6.9a1. I found some bugs there that were also present in 2.6.8. I found the following bugs: -PureSignal stops : Feedback and correction (green) disappear, all parameters are set as in PowerSDR 3.4.9( worked great there) . Feedback and Correcting ar...

Go to advanced search