Search found 184 matches
- Fri Feb 09, 2024 12:56 am
- Forum: Protocol 2 Firmware (all radios)
- Topic: Firmware fix for RF appearing on RX only ports
- Replies: 75
- Views: 6650
Re: Firmware fix for RF appearing on RX only ports
Your welcome.
- Thu Feb 08, 2024 5:46 am
- Forum: Protocol 2 Firmware (all radios)
- Topic: Firmware fix for RF appearing on RX only ports
- Replies: 75
- Views: 6650
Re: Firmware fix for RF appearing on RX only ports
[i] Updated my 200D to the P2 firmware 1.9.20B and using Thetis v2.10.3.6dev2. Runs PureSignal OK and seems fine on RX. HOWEVER, I noted a TX problem on 15, 12, 10, 6m where the TX signal (monitored on DUP) had many small spurs over a wide spectrum (~350kHz). This caused my linear amp to trip out d...
- Fri Feb 02, 2024 9:25 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: Firmware fix for RF appearing on RX only ports
- Replies: 75
- Views: 6650
Re: Firmware fix for RF appearing on RX only ports
laurencebarker wrote:We should point out that Christoph has updated piHPSDR to use the new firmware too.
It would seem this thread relates to ANAN and Orion hardware running Thetis and not Saturn hardware running piHPSDR software.
Might be relevant for the piHPSDR forum thread?
- Thu Feb 01, 2024 10:36 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: Firmware fix for RF appearing on RX only ports
- Replies: 75
- Views: 6650
Re: Firmware fix for RF appearing on RX only ports
Thanks for the combination Thetis + firmware fix for the RF appearing on RX only ports. With P2 firmware v1.9.20B installed in my 200D and running Thetis v2.10.3.6 Dev 2 there is no longer a detectable RF pulse during CW on ports marked "Do not TX". I have been running the firmware and th...
- Sat Jan 06, 2024 10:51 pm
- Forum: Apache Labs News
- Topic: ANAN-G2 Shipping Update
- Replies: 260
- Views: 3051934
Re: ARE YOU STILL ALIVE Abhi?
Good evening Abhi, What's going on, don't you receive or do you answer my messages? I still have no news from the Nuc that you told me to have sent me in mid-November. My Anan 7000 will not work for Christmas. I wish you a happy holiday season. Sincerely Yves F6EPT > Yves, It's a common line AL use...
- Sat Jan 06, 2024 1:26 am
- Forum: Thetis
- Topic: Split function
- Replies: 5
- Views: 930
Re: Split function
W9BHI wrote:Richie,
I noticed that the Split function does not work in the 11 meter mode. It works on all other bands.
Is this something that could be fixed in the future?
Thanks.
Tested into a dummy load and split works fine on 11m band on my setup. Running Thetis 2.10.3.5 u2 and Thetis 2.10.3.6 dev.
- Sun Dec 31, 2023 5:13 am
- Forum: Thetis
- Topic: Thetis v2.10.3.5 final release
- Replies: 97
- Views: 153903
Re: Thetis v2.10.3.5 final release
Is there any chance of an option to dock the meter container/s with the main Thetis window when the containers are outside Thetis please? Not sure if it is a setting I have not ticked, but when moving thetis on screen or minimizing thetis to the taskbar, the meters are left behind on their own. I pr...
- Sat Dec 30, 2023 10:24 pm
- Forum: Thetis
- Topic: CAT problem
- Replies: 23
- Views: 2335
Re: CAT problem
Thanks Richie for the short video explaining the server connection setup in Thetis. I've not used TCP before, however have been running VSPE (paid version) for some time.
Scott, I read your post, you linked to here for addition information, very interesting.
Scott, I read your post, you linked to here for addition information, very interesting.
- Fri Dec 29, 2023 11:04 pm
- Forum: Sales, Delivery, Warranty & Repair Discussions
- Topic: Poor warranty service Australia
- Replies: 6
- Views: 3247
Re: Poor warranty service Australia
Well, I thought it would be too good to be true, and it was. 4-5 weeks have long passed and once again my messages are not being replied to. Back to the frustrating waiting game. Garry VK4KE Nor has Tony from Apache Labs fulfilled the replacement of your faulty Andromeda with the G2 as indicated. T...
- Sun Dec 24, 2023 11:46 am
- Forum: Thetis
- Topic: Thetis v2.10.3.5 final release
- Replies: 97
- Views: 153903
Re: Thetis v2.10.3.5 final release
Thetis v2.10.3.5 final release is out over on github here : https://github.com/ramdor/Thetis/releases Cheers for all the testing during the pre-release stages. Have a good Christmas folks. Cheers. Overview video : https://youtu.be/aTvEznU2fY8?si=I9vJ1bnUVAPN0lEO Yes thanks for all the hard effort t...
- Fri Dec 22, 2023 1:15 am
- Forum: Thetis
- Topic: Thetis v2.10.3.5 final release
- Replies: 97
- Views: 153903
Re: Thetis v2.10.3.5 Pre-Release
Installed pre release 5 and noticed that if you hold the mouse over CM indicator logo the pop up info message flashes on/off. Anyone else seeing this ? CAT TCP enabled message next to it works ok. I think I am replicating this issue correctly. This issue occurs when you have the taskbar of Thetis c...
- Sat Dec 16, 2023 3:50 am
- Forum: Thetis
- Topic: Thetis v2.10.3.5 final release
- Replies: 97
- Views: 153903
Re: Thetis v2.10.3.5 Pre-Release
When using panafall and I try to expand the waterfall all the way up Thetis exits. Also happened once when scrolling the frequency bar on top of spectrum display. Radio is 7000del mkIII Firmware 2.1.12 Running W11 7800xt video card latest amd drivers. Video below. https://youtu.be/cuChn1B5Rno I am ...
- Mon Nov 20, 2023 2:31 am
- Forum: piHPSDR
- Topic: piHPSDR on Windows
- Replies: 5
- Views: 4755
Re: piHPSDR on Windows
Sorry for *bumping* and old thread. I've been playing with this mod config and it works easy. Does anyone (who has either developed this or uses it) know how to make piHPSDR (this version setup) window bigger for larger screens?
- Mon Nov 13, 2023 12:27 pm
- Forum: piHPSDR
- Topic: piHPSDR - DL1YCF running on a PC
- Replies: 7
- Views: 3799
Re: piHPSDR - DL1YCF running on a PC
Same issue with Linux Mint.
- Mon Nov 13, 2023 1:09 am
- Forum: piHPSDR
- Topic: piHPSDR - DL1YCF running on a PC
- Replies: 7
- Views: 3799
Re: piHPSDR - DL1YCF running on a PC
AndrewK wrote:Phil, piHPSDR v2.3 on a Mint 21.2 PC with 7000 & P2 audio is good.
Andrew
Thanks Andrew for your response. I'll give Mint 21.2 a run and see how it goes.
- Sun Nov 12, 2023 2:42 am
- Forum: piHPSDR
- Topic: piHPSDR - DL1YCF running on a PC
- Replies: 7
- Views: 3799
Re: piHPSDR - DL1YCF running on a PC
w-u-2-o wrote:Does it work OK with Protocol 2 and Thetis?
Works perfectly with Thetis versions and P2.
- Sun Nov 12, 2023 12:29 am
- Forum: piHPSDR
- Topic: piHPSDR - DL1YCF running on a PC
- Replies: 7
- Views: 3799
piHPSDR - DL1YCF running on a PC
Hi all, I'm still working through how to use Linux and piHPSDR so some of my terminology might be a little off. I've setup a PC laptop (i7, 12Gb ram, 500gb SSD, dedicated graphics - GeForce GTX, touch screen etc) running Debian 11 Bullseye with Raspberry Pi desktop (so it all looks like the G2 with ...
- Thu Nov 09, 2023 11:50 pm
- Forum: Thetis
- Topic: Thetis v2.10.3.3 released
- Replies: 103
- Views: 52065
Re: Thetis v2.10.3.3 released
[/quote] this will be fixed in 2.10.3.4 [/quote]
Can I ask when 2.10.3.4 will drop? I'm just building a new PC with Win11 Enterprise 23H2 and will wait for 2.10.3.4 to come down if its not too far away.
Can I ask when 2.10.3.4 will drop? I'm just building a new PC with Win11 Enterprise 23H2 and will wait for 2.10.3.4 to come down if its not too far away.
- Fri Nov 03, 2023 10:30 pm
- Forum: Apache Labs News
- Topic: ANAN-G2 Shipping Update
- Replies: 260
- Views: 3051934
Re: ANAN-G2 Shipping Update
I suggest any one (in VK at least) looking to purchase a new G2 should consider the following experience of one owner dealing with Apache Labs warranty standards and service. This could extend further than just VK.
viewtopic.php?f=43&t=4873
viewtopic.php?f=43&t=4873
- Fri Nov 03, 2023 10:23 pm
- Forum: G2 Operating System & Applications
- Topic: New G2 with display and problems
- Replies: 31
- Views: 23886
Re: New G2 with display and problems
Laurence, I know that this is more a volunteer project than an industrial product like Kenwood TRXs.. BUT for 4000 bucks I would expect some kind of mod kit from the "factory" like the fan mod ANAN7000. 73 Volker DL4ZBG Yes for more than 4,000USD you'd expect far better service that's not...
- Fri Nov 03, 2023 10:10 pm
- Forum: G2 Operating System & Applications
- Topic: New G2 with display and problems
- Replies: 31
- Views: 23886
Re: New G2 with display and problems
The only thing missing from this is the timeframe for when you will get those cables?
Maybe take a look at this post and decide for yourself.
viewtopic.php?f=43&t=4873
Don't hold your breath waiting for those cables, you might be waiting a long time.
Maybe take a look at this post and decide for yourself.
viewtopic.php?f=43&t=4873
Don't hold your breath waiting for those cables, you might be waiting a long time.
- Fri Nov 03, 2023 6:11 am
- Forum: Thetis
- Topic: Thetis v2.10.3.3 released
- Replies: 103
- Views: 52065
Re: Thetis v2.10.3 released
ramdor wrote:UPDATED to V2.10.3.3
https://github.com/ramdor/Thetis/releases/tag/v2.10.3.3
v2.10.3.3 Change Log
- [fix] resolved DLL load issue for Win7 and other OS's that don't have SetThreadDescription()
God damn machine, I can't keep up...
- Fri Nov 03, 2023 4:32 am
- Forum: Sales, Delivery, Warranty & Repair Discussions
- Topic: Poor warranty service Australia
- Replies: 6
- Views: 3247
Re: Warranty service Australia
What an absolute disgrace and clearly you are being lied to about the status of your product and return.
Clearly an incompetent business, as we've seen with the release of the G2 and poor-quality control. Buyers in Australia should be wary of this.
Clearly an incompetent business, as we've seen with the release of the G2 and poor-quality control. Buyers in Australia should be wary of this.
- Fri Nov 03, 2023 2:21 am
- Forum: Thetis
- Topic: Thetis v2.10.3.3 released
- Replies: 103
- Views: 52065
Re: Thetis v2.10.3 released
Not enough testing/testers. I only just got 2.10.3 setup and running late last night... not much of a chance to test, but all good, I got 2.10.3.2 now and installing. Ver 2.10.3 had some nice feature inclusions. I watched the short video on those and agree with moving the CFC audio graph thing into...
- Fri Nov 03, 2023 2:12 am
- Forum: Apache Labs News
- Topic: ANAN-G2 Shipping Update
- Replies: 260
- Views: 3051934
Re: ANAN-G2 Shipping Update
Hi all, Just a quick update to let you know that we are about 3-4 weeks away from shipping out the first batch of the G2-1Ks, if you have received this email your order will ship in this batch! It has taken slightly longer than anticipated to get all the modules ready, some sub-assemblies such as t...
- Thu Nov 02, 2023 8:24 am
- Forum: Thetis
- Topic: CPU Volts and Amp meters not working - Thetis 2.10.2.2
- Replies: 8
- Views: 1881
Re: CPU Volts and Amp meters not working - Thetis 2.10.2.2
Thanks for the replies guys. I'm guessing you are all running an Andromeda not a 7000DLE Mk2/3? Its a brand new full install, not over the top of an existing version of Thetis, database at default settings or once configured for the Andromeda makes no difference. The CPU/Systems/Thetis percentage j...
- Wed Nov 01, 2023 8:57 pm
- Forum: Thetis
- Topic: CPU Volts and Amp meters not working - Thetis 2.10.2.2
- Replies: 8
- Views: 1881
Re: CPU Volts and Amp meters not working - Thetis 2.10.2.2
Thanks for the replies guys. I'm guessing you are all running an Andromeda not a 7000DLE Mk2/3? Its a brand new full install, not over the top of an existing version of Thetis, database at default settings or once configured for the Andromeda makes no difference. The CPU/Systems/Thetis percentage ju...
- Sat Oct 28, 2023 9:53 pm
- Forum: Thetis
- Topic: CPU Volts and Amp meters not working - Thetis 2.10.2.2
- Replies: 8
- Views: 1881
CPU Volts and Amp meters not working - Thetis 2.10.2.2
Hi all, Upgraded the Thetis version on the Andromeda last night (from Thetis version 2.9.0.31) to Richie's latest v2.10.2.2. Complete new (fresh) Database build on 2.10.2.2 CPU is value on the info bar at the bottom is stuck at 100% (system or Thetis), Volts show something close to 14v and AMPS say ...
- Fri Oct 27, 2023 12:36 pm
- Forum: Apache Labs News
- Topic: ANAN-G2 Shipping Update
- Replies: 260
- Views: 3051934
Re: ANAN-G2 Shipping Update
Hello, An update was provided via email by Abhi on 28/08/2023, this went to everyone with a preorder: Dear Valued ANAN-G2 Customer, please know that our primary commitment is to deliver a product that meets our highest standards of performance, reliability, and innovation. Warm regards, Abhi Clearl...
- Sun Oct 22, 2023 4:26 am
- Forum: Apache Labs News
- Topic: ANAN-G2 Shipping Update
- Replies: 260
- Views: 3051934
Re: ANAN-G2 Shipping Update
What email are you trying to contact us on please? thanks I feel for amikosun and others on the poor communication and the AI generated ChatGPT responses from AL. How many do you have? Why not with reply with a name of the "administrator"? I know one "owner" who put his Andromed...