DH1KLM wrote:It is not possible to change the pictures without compiling the whole thing.

One day my friend, one day!

Thanks!

Perry

So, after searching for a while here this morning, I cant find the answers im looking for. The Grey line/Spotting map... Does anyone know i that will ever be completed? I have never been able to get the spots to show on the map like it says it should. Also, VOACAP has never worked. It just says &quo...

Already replaced it with another one. I have to test a few others as well. I also changed the non working timeservers in DX/SWL Spotter. It's not really important, but it annoyed me that the function didn't work. new1.png spot.PNG Where was the map photo, in which directory? I wouldnt mind changing...

Thanks for this post! I had come here just to look for info on where to find the .csv file as well. If only the DX spots would show on the map, like it says it does and like the KE9NS software for the flex does. Looks like the same map and everything.

Perry

I love making skins. I have 4 guys using skins ive made for them. Thanks to Rob for all the button packs and stuff!

Thanks for the update! 64 bit Thetis reduced CPU% usage from 3% to 1% (Thetis only usage) at 192k sampling rate. Impressive. System usage peaks out at 4% with 11 tabs of Chrome, Logger32, Telnet and VSPE running. Observation: Switching between RX1 sample rates was seamless with previous version 32b...

Thanks for the update! 64 bit Thetis reduced CPU% usage from 3% to 1% (Thetis only usage) at 192k sampling rate. Impressive. System usage peaks out at 4% with 11 tabs of Chrome, Logger32, Telnet and VSPE running. Observation: Switching between RX1 sample rates was seamless with previous version 32b...

Thanks for the update! 64 bit Thetis reduced CPU% usage from 3% to 1% (Thetis only usage) at 192k sampling rate. Impressive. System usage peaks out at 4% with 11 tabs of Chrome, Logger32, Telnet and VSPE running. Observation: Switching between RX1 sample rates was seamless with previous version 32b...

Where do I find the 64 bit/32 bit versions? I only see one MSI file? Am I blind?

Perry

LarryW wrote:Sorry---- I am using Thetis v2.7.0 (3/1/20) with the 7000 mkll.

Regards,
Larry

Me too, 2.7.0(A3) and a 200D. I know a couple gentleman running 2.6.9 still and have no issues. Who knows, it is what it is lol.

LarryW wrote:Mine does the same thing here too, it's really annoying! For some reason I had the first memory set to 10 meters (must have been playing around)---now every time I click on the memory tab the radio changes to that 10 meter frequency.

Larry N7ZDR

What software version are you running?

Hi Enzo, Scott covered this pretty well already, but a couple of weeks ago I started playing around with some of the un-docked panels available with the collapsed mode "Andromeda" interface and really liked it. With the limited real estate of my little 22" monitor I can't fit everyth...

So, ive been noticing this for quite some time now, but I don't use the memories much so It wasn't a big deal. However, i'm getting back into SSB more so switching TX profiles and not having the drive levels save per TX profile, but per band, is becoming an issue for me. When I switch modes and TX p...

just under 10 here, every single time. PowerSDR 3.4.9 took about 15 seconds. 200d, P2 1.9, 2.7.0a3, Dell i7 4770, SSD, Nvidia 1050ti, 16gb, dual 27" 1440p monitors. I did however notice that it was getting longer to boot. Maybe up to 12-13 seconds. But it was time for a fresh install after 7 mo...

I heard Richie is tied up on the SunSDR project. Which is a money make for him so I dont blame him one bit. Im so grateful for everything he did for us this last year or more. I was really looking forward to the meter update he was planning so we could see all the multi meters at one time.

Gary, Network Watchdog was checked! Will uncheck and let it run for a couple hours to see what happens. FYI- I only tested the transmit for a short time after making the changes per Mark's post. No transmit dropouts where noted at that time BUT the screen/radio still freezes after about 1 hour. May...

Hey, good for you for warming up the soldering iron Perry! Glad you fixed it! That Q effect on AM/SAM when narrowing the filter by sliding one edge in the panadapter has always been there, going back to the Flex version of PowerSDR. I believe it happens because you are bringing the very sharp/steep...

Oh and Rob, that FET fixed my 200d. Thanks for the schematics and pics you sent. You were a life saver.

Perry

The only person I have spoken with on the air who has actually built an AM stereo transmitter that he uses on 75 meters is Jerry - WA2FNQ. I believe he used the Magnovox system to generate the signal. Unfortunately, the biggest stumbling block seems to be the lack of receivers that can detect AM st...

Not sure where to post this, so admins, love where neccessary and i apologize. I'll start off with the rig. 200d, FW ver. 1.9, Thetis 2.7.0a3. Anyway, last night I had a power blink, off and quick on, it caused the astron power supply that powers the rig, to make a weird hum the second it went off a...

Never mind, now that I selected "Snap-Click Tune", its back to the way it was. Sorry!

Perry

One more thing. On the last version I used, 2.6.9c3, and every version before, when you would left click on the pan adapter, it would automatically select the closest frequency to the "Tune Step" you have selected. For instance, if you have your tune step set for 1khz, and you click on the...

Works now Rob!! Thanks!

Perry

Just installed 2.7.0 a3, using a 200d, p2 1.9 firmware. All seems to work except the keyboard shortcuts and space bar MOX. I cant get any of the keyboard shortcuts to do anything. I know W2SDR was having the same issue and posted about here about a week ago I believe. Anyone else besides us having t...

Just loaded 1.9 onto my 200D as of last night, and its working hi hi fine business OM lol. Pure Signal is working and hanging in there just fine, no glitches or bugs to report as of yet, 5 hours of operation. Will update if I have any issues...


Perry

The grid is part of the actual photo used for the map

Perry

2.6.9 is officially released, with installer: https://github.com/TAPR/OpenHPSDR-Thetis/releases We can continue to use this topic to record bugs and such. Richie is taking a little hiatus in order to do some unimportant things like earn a living and stuff like that. He'll let us know when he's re-e...

Scott, Nothing bumped in the audio rack. Why would I be able to modulate the radio through the line in when it is optioned for mic input? When I switch between mic and line there is no difference. There is a lot of gain in the line input for some reason. Something in the radio or the software has c...

There is a problem with Pure Signal enable when its status is saved in a transit profile. For example, when I go from a profile that has Pure Signal enabled to a profile that it’s not enabled and then return to the “enabled” profile, Pure Signal does not work until I turn the button off and then on...

Also, on that note, I just want to say that I think we all very, very much appreciate your work style, Richie. It takes a brave and rugged individual to develop features in a way that encourages free, open and public discourse on that work, including the constant bombardment of feature requests. I ...