Search found 9 matches

by vk3amp
Fri Mar 17, 2023 9:56 pm
Forum: Thetis
Topic: Thetis v2.9.0.8 - meters and then some more
Replies: 158
Views: 45759

Re: Thetis v2.9.0.8 - meters and then some more

Hi All, Love the customisable Meters!! Although I think I found a bug with puresignal. If I transmit in CW and change back to SSB puresignal no longer functions. I have to re start thetis for it to work. I am using an Anan10 with protocol 2. A friend of mine using the Anan 7000dle has reported that ...
by vk3amp
Wed Jul 06, 2022 10:13 pm
Forum: Thetis
Topic: Seq errors after PC upgrade
Replies: 9
Views: 1813

Re: Seq errors after PC upgrade

The motherboard is a Gigabyte Z690 Aorus Elite which has a Realtek® 2.5GbE LAN chip (2.5 Gbps / 1 Gbps / 100 Mbps).

I have both the PC and the radio going into a Cisco gigabit switch.
by vk3amp
Wed Jul 06, 2022 9:20 pm
Forum: Thetis
Topic: Seq errors after PC upgrade
Replies: 9
Views: 1813

Re: Seq errors after PC upgrade

It's was a complete upgrade.
CPU, motherboard and ram.
I am running windows 11.

The Old system was an i7-6700.

I'm suspecting it may have something to do with the onboard network card.
by vk3amp
Wed Jul 06, 2022 3:08 pm
Forum: Thetis
Topic: Seq errors after PC upgrade
Replies: 9
Views: 1813

Seq errors after PC upgrade

I have been using thetis 2.9.0.6 for a few months now and has been working well. Today I upgraded my PC to the latest generation. I7-12700. After the install I turned on my new PC but unfortunately I was unable to connect to the radio. It seems when I click the power button it connects to the radio ...
by vk3amp
Mon Aug 16, 2021 5:16 am
Forum: Protocol 2 Firmware (all radios)
Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
Replies: 124
Views: 151671

Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic

This is just an update to my earlier post, after much fussing about, I have figured out the issue with no predistorion correction. Initially, I assumed the problem was within the software or firmware. So ended up testing the same setup with a different amplifier and it worked. After this test, I hoo...
by vk3amp
Wed Aug 04, 2021 1:49 pm
Forum: Protocol 2 Firmware (all radios)
Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
Replies: 124
Views: 151671

Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic

My setup. Anan 10. 10.8pre20 Thetis 2.8.11 21f 1.5kw ldmos amplifier. -55db coupler. İ seem to be having an issue getting pure signal to work with this setup. Turning on or off pre distortion only makes a marginal improvement to the Imd please see the photos. One thing I did notice is that there are...
by vk3amp
Sat Mar 28, 2020 11:47 pm
Forum: Protocol 2 Firmware (all radios)
Topic: 14-bit Hermes (10E and 100B) Protocol 2 Firmware Topic
Replies: 17
Views: 22428

Re: P2 version 10.3 released for 14-bit Hermes (10E and 100B)

Hi Rick, I've tested the new firmware this morning. The ADC 2 warning has stopped flashing. Everything seems to be working normal. Did some tests with PS. PS is now functional up to 192khz. When i change it to 384khz it still seems to be working but the panadapter seems to slow down also the tx band...
by vk3amp
Sat Mar 28, 2020 10:26 am
Forum: Protocol 2 Firmware (all radios)
Topic: 14-bit Hermes (10E and 100B) Protocol 2 Firmware Topic
Replies: 17
Views: 22428

Re: P2 version 10.3 released for 14-bit Hermes (10E and 100B)

İ can confirm that ADC 2 is flashing continuously.


Regards Onder
by vk3amp
Mon May 20, 2019 9:28 am
Forum: Protocol 2 Firmware (all radios)
Topic: 14-bit Hermes (10E and 100B) Protocol 2 Firmware Topic
Replies: 17
Views: 22428

Re: P2 version 10.3 released for 14-bit Hermes (10E and 100B)

Hi all, I have installed the latest version of the protocol 2 firmware for my ANAN10e, using the latest Thetis 2.6.7. Everything seems to work perfectly except for Pure signal. When I activate PS it seems to make the firmware crash after a little while, which needs the radio power cycled to recover....

Go to advanced search