Search found 9 matches
- Fri Mar 17, 2023 9:56 pm
- Forum: Thetis
- Topic: Thetis v2.9.0.8 - meters and then some more
- Replies: 158
- Views: 51858
Re: Thetis v2.9.0.8 - meters and then some more
Hi All, Love the customisable Meters!! Although I think I found a bug with puresignal. If I transmit in CW and change back to SSB puresignal no longer functions. I have to re start thetis for it to work. I am using an Anan10 with protocol 2. A friend of mine using the Anan 7000dle has reported that ...
- Wed Jul 06, 2022 10:13 pm
- Forum: Thetis
- Topic: Seq errors after PC upgrade
- Replies: 9
- Views: 1951
Re: Seq errors after PC upgrade
The motherboard is a Gigabyte Z690 Aorus Elite which has a Realtek® 2.5GbE LAN chip (2.5 Gbps / 1 Gbps / 100 Mbps).
I have both the PC and the radio going into a Cisco gigabit switch.
I have both the PC and the radio going into a Cisco gigabit switch.
- Wed Jul 06, 2022 9:20 pm
- Forum: Thetis
- Topic: Seq errors after PC upgrade
- Replies: 9
- Views: 1951
Re: Seq errors after PC upgrade
It's was a complete upgrade.
CPU, motherboard and ram.
I am running windows 11.
The Old system was an i7-6700.
I'm suspecting it may have something to do with the onboard network card.
CPU, motherboard and ram.
I am running windows 11.
The Old system was an i7-6700.
I'm suspecting it may have something to do with the onboard network card.
- Wed Jul 06, 2022 3:08 pm
- Forum: Thetis
- Topic: Seq errors after PC upgrade
- Replies: 9
- Views: 1951
Seq errors after PC upgrade
I have been using thetis 2.9.0.6 for a few months now and has been working well. Today I upgraded my PC to the latest generation. I7-12700. After the install I turned on my new PC but unfortunately I was unable to connect to the radio. It seems when I click the power button it connects to the radio ...
- Mon Aug 16, 2021 5:16 am
- Forum: Protocol 2 Firmware (all radios)
- Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
- Replies: 124
- Views: 172491
Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
This is just an update to my earlier post, after much fussing about, I have figured out the issue with no predistorion correction. Initially, I assumed the problem was within the software or firmware. So ended up testing the same setup with a different amplifier and it worked. After this test, I hoo...
- Wed Aug 04, 2021 1:49 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
- Replies: 124
- Views: 172491
Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
My setup. Anan 10. 10.8pre20 Thetis 2.8.11 21f 1.5kw ldmos amplifier. -55db coupler. İ seem to be having an issue getting pure signal to work with this setup. Turning on or off pre distortion only makes a marginal improvement to the Imd please see the photos. One thing I did notice is that there are...
- Sat Mar 28, 2020 11:47 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: 14-bit Hermes (10E and 100B) Protocol 2 Firmware Topic
- Replies: 17
- Views: 27324
Re: P2 version 10.3 released for 14-bit Hermes (10E and 100B)
Hi Rick, I've tested the new firmware this morning. The ADC 2 warning has stopped flashing. Everything seems to be working normal. Did some tests with PS. PS is now functional up to 192khz. When i change it to 384khz it still seems to be working but the panadapter seems to slow down also the tx band...
- Sat Mar 28, 2020 10:26 am
- Forum: Protocol 2 Firmware (all radios)
- Topic: 14-bit Hermes (10E and 100B) Protocol 2 Firmware Topic
- Replies: 17
- Views: 27324
Re: P2 version 10.3 released for 14-bit Hermes (10E and 100B)
İ can confirm that ADC 2 is flashing continuously.
Regards Onder
Regards Onder
- Mon May 20, 2019 9:28 am
- Forum: Protocol 2 Firmware (all radios)
- Topic: 14-bit Hermes (10E and 100B) Protocol 2 Firmware Topic
- Replies: 17
- Views: 27324
Re: P2 version 10.3 released for 14-bit Hermes (10E and 100B)
Hi all, I have installed the latest version of the protocol 2 firmware for my ANAN10e, using the latest Thetis 2.6.7. Everything seems to work perfectly except for Pure signal. When I activate PS it seems to make the firmware crash after a little while, which needs the radio power cycled to recover....