Pure signal correcting, not stable. Back with the version Angelia_Protocol_2_v11.7_7-15-18.rbf
The only one that works 95% with my device and those of my friends.
No version 12 is working yet
Search found 20 matches
- Fri Feb 14, 2020 7:42 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: New 100D Angelia Protocol 2 Firmware Topic
- Replies: 63
- Views: 66809
Re: 2.6.9
I have a little problem with Pure Signal since version 2.6.9_C1. I use about 15 seconds and the Pure Signal no longer works. The PS-A button is still working, but the two green Correcting and Feedback boxes turn black. Tried several times always the same problem. Version 2.6.9_B6 and previous versio...
Re: 2.6.9
With the Thetis_2330_201219_269_b6.zip version the display is ok, but with the Thetis_v2.6.9-b6_Setup_24Dec19.msi version
the display is missing. Is it the same version?
Michel
the display is missing. Is it the same version?
Michel
Re: 2.6.9
YES!!
mic gain works and TX gain Wave menu also
you are the best. now the beer ...
mic gain works and TX gain Wave menu also
you are the best. now the beer ...
Re: 2.6.9
I also have the same non functional mic gain problem since version 2.6.9 B2 and up and TX Gain (dB) Wave menu still does not work with the latest 2.6.9b5-3
Michel
Michel
Re: 2.6.9
Hmmm ...
with the new box no change from -70dB to + 70dB, only affects the VAC
test with old database and reset
Michel
with the new box no change from -70dB to + 70dB, only affects the VAC
test with old database and reset
Michel
Re: 2.6.9
Works with VAC only
Michel
Michel
Re: 2.6.9
I have not used VAC. Always in direct connection, and worked with all previous versions
but works using VAC
Michel
but works using VAC
Michel
Re: 2.6.9
Hi Richie
TX Gain (dB) in Wave menu no longer works with version 2.6.9 b5_2
Michel
TX Gain (dB) in Wave menu no longer works with version 2.6.9 b5_2
Michel
Re: 2.6.9
trick
For recording, with output level identical to the input, RX1AF: must be 100. In this way no need to adjust TX gain (Wave Menu) and the AGC Gain can also reduce the recording level ...
Michel
For recording, with output level identical to the input, RX1AF: must be 100. In this way no need to adjust TX gain (Wave Menu) and the AGC Gain can also reduce the recording level ...
Michel
Re: 2.6.9
yes, you have to tx before, and hit play
Michel
Michel
Re: 2.6.9
I made a recording by trying the following functions successfully during the recording. RX1 AF = ok NB = ok NR = ok NR2 = ok ANF = ok AGC Gain = ok all these functions work well and the playback (in TX) is the same, do not see anything abnormal. In recording mode, you have an AF frequency. If you pl...
Re: 2.6.9
UPDATE Hi all, Please try : https://www.dropbox.com/s/sjzmbx14w0oyys1/Thetis_0640_131219_269_b3_1.zip?dl=0 This is a pre b4 release, as some of the items are still work in progress. Hopefully will fix the issue Michel is having with PS attenuation. 73 for now, Richie. (11/19/19) b3_1 -add: vsync op...
Re: 2.6.9
[/quote]Have you tried going back to a Thetis version before 2.6.9_b1 recently? In other words, now that it does not work for you, if you go back now does it work for you again? It may not be a Thetis problem. This behavior is more indicative of a firmware problem or a problem with excess current th...
Re: 2.6.9
Here is my problem with the Auto-Attenuate (PS-A) since version Thetis_2.6.9_B1, 2.6.9_B2, 2.6.9_B3. Note that with the previous versions everything worked correctly. Test with old database or new and same problem Drive 15 or low value ok (Fig. 1), but when I increase the drive (Fig .2) the Auto-Att...
Re: 2.6.9
Hi Richie I fixed the problem for my (OC control) with several comparison of new database. The OC control only works if VFO A is on a band 160, 80, 60, 40 etc ... but VFO B must also be between the following frequencies even if not in use 0.200mhz to 29.700mhz 50.000mhz to 54.00mhz or 144-148mhz Wit...
Re: 2.6.9
Hi everyone I noticed a problem with the (OC control) I use the output for my band select amplifier I delete the database.xml before installation with version 2.6.7 works well to Thetis_2.6.8_30Sept19_c2 since version Thetis_2.6.8_1Nov19_d6 no more (OC control) without using an older database. also ...
- Mon May 06, 2019 10:18 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: Angelia (ANAN-100D) Protocol 2 test pilots: please check in
- Replies: 44
- Views: 43293
Re: Angelia (ANAN-100D) Protocol 2 test pilots: please check in
Thetis v2.6.7 v12.1pre2 RX SEQ=>2,8 diversity ok TX SEQ=>2, 10 Correcting does not work correctly ------------------------------------ v12.1pre2_5550 RX OK NO SEQ TX OK NO SEQ Diversity OK NO SEQ PS NO SEQ Correcting does not work correctly same problem as v12.1pre2 Feedback green OK but correcting ...
- Tue Apr 30, 2019 7:53 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: Angelia (ANAN-100D) Protocol 2 test pilots: please check in
- Replies: 44
- Views: 43293
Re: Angelia (ANAN-100D) Protocol 2 test pilots: please check in
Thetis v2.6.6 and HPSDRProgrammer_web_v0.2.7 v pre1_5070 RX ok no SEQ=> RX + Diversity SEQ=>2 Diversity non fontional TX ok no SEQ=> TX + PS SEQ=> 2 + feedback level, no correcting ------------------------------------------------- v pre1_5171 some missing communication in RX & TX RX SEQ=>8 41 40...
- Wed Apr 24, 2019 5:39 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: Angelia (ANAN-100D) Protocol 2 test pilots: please check in
- Replies: 44
- Views: 43293
Re: Angelia (ANAN-100D) Protocol 2 test pilots: please check in
(Thetis V2.66) -From Protocol 1 V 5.9, using HPSDRProgrammer_V2_nopcap 2.0 Firmware V 11.7 OK -Using HPSDRProgrammer Web to Firmware V 11.8 no power on, and unable to reuse HPSDRProgrammer Web. (see attachments) -using HPSDRBootloader to V 11.9 no RX, no TX Seq=>40 -using HPSDRBootloader to Angelia_...