Search found 26 matches

by M1AQO
Thu Dec 19, 2019 8:22 am
Forum: Microphones, Speakers & Audio Hardware
Topic: Hermes Mic Input
Replies: 4
Views: 5126

Re: Hermes Mic Input

Scott,

I've changed the Jumper and all appears to be well. :P

I'm assuming that no Bias was causing an inpedance mismatch and causing the noise on the mic.

Thanks again.

Glenn M1AQO
by M1AQO
Wed Dec 18, 2019 9:41 am
Forum: Microphones, Speakers & Audio Hardware
Topic: Hermes Mic Input
Replies: 4
Views: 5126

Re: Hermes Mic Input

Scott, Correct on all points. It will be interesting to see the result when the Bias is connected. It would appear in my current setup that there is an impedance mismatch due to no Bias powering the FET in the element. It also explains why there is only two shorting clips in the radio, because you s...
by M1AQO
Tue Dec 17, 2019 2:49 pm
Forum: Microphones, Speakers & Audio Hardware
Topic: Hermes Mic Input
Replies: 4
Views: 5126

Hermes Mic Input

Hi, I'm just looking for some help with the Anan 10 front mic input. I'm using a PC Electret mic wired: Ground: Sleeve Mic: Tip & Ring The mic is working fine with the radio, apart from* Ive checked the jumpers in the radio: Jumper 4 (Mic) is connected to terminals 2 & 3 for "tip" ...
by M1AQO
Mon Dec 02, 2019 10:25 am
Forum: Amplifiers & Tuners
Topic: Anan 10 Amp Keying (Hermes I/O Pinout)
Replies: 2
Views: 6324

Anan 10 Amp Keying (Hermes I/O Pinout)

Hi, I just wanted to ask for confirmation of the pins for Amp Keying on the Hermes board Anan 10 (26 Pin I/O) Looking at the schematic it shows pin 1 for PTT out and pin 2 for ground. When converting to an IDC connector according to the Anan 200 manual this flips to pin 26 and 25 respectively. There...
by M1AQO
Tue Oct 15, 2019 7:16 pm
Forum: Apache Labs News
Topic: Introducing the ANAN-8000DLE MKII
Replies: 101
Views: 108215

Re: Introducing the ANAN-8000DLE MKII

Strange.

Why announce something then remove the link

You would have thought they would have updated us
with the status.

Oh well.
by M1AQO
Tue Oct 15, 2019 4:08 pm
Forum: Apache Labs News
Topic: Introducing the ANAN-8000DLE MKII
Replies: 101
Views: 108215

Re: Introducing the ANAN-8000DLE MKII

Hi,

Is there any update on delivery times. I also believe that the PA is 500w from what I’ve heard.

Is anybody aware of this ?

That would maybe explain the higher voltage supply required.

Thanks

Glenn
by M1AQO
Sat Oct 05, 2019 9:53 am
Forum: Thetis
Topic: Protocol 2 for Anan 10
Replies: 2
Views: 3262

Re: Protocol 2 for Anan 10

Thanks Scott
by M1AQO
Fri Oct 04, 2019 2:35 pm
Forum: Thetis
Topic: Protocol 2 for Anan 10
Replies: 2
Views: 3262

Protocol 2 for Anan 10

Hi, I would like to try Thetis therfore need to download Protocol 2 FW for the Anan 10. Can somebody provide the link for the version I should be using please. Also what is the latest version of Protocol 1 ? This radio has been purchased second hand and I would like to download both the latest versi...
by M1AQO
Fri Sep 27, 2019 4:48 pm
Forum: PowerSDR mRX
Topic: SWR Meter Option and Panadapter Display
Replies: 2
Views: 4052

Re: SWR Meter Option and Panadapter Display

Perfect Walter, Thanks !!
by M1AQO
Fri Sep 27, 2019 2:50 pm
Forum: PowerSDR mRX
Topic: SWR Meter Option and Panadapter Display
Replies: 2
Views: 4052

SWR Meter Option and Panadapter Display

Using Power SDR MRX v3.49 1, Is there an option to display the SWR in the display window on Tune. It displays the SWR when in SSB and transmitting, but I want to use the SWR meter to tune my Doublet whilst using the tune option. 2, Is there also a way to remove the centre line displayed on the Panad...
by M1AQO
Fri Sep 20, 2019 3:24 pm
Forum: Apache Labs Radios: Buy/Sell/Trade
Topic: Anan 10e Wanted EU
Replies: 0
Views: 4496

Anan 10e Wanted EU

Hi,

Looking for an Anan10e.

A boxed, clean, unmodified Radio required.

Thanks

Glenn M1AQO
by M1AQO
Mon Aug 26, 2019 5:43 pm
Forum: Microphones, Speakers & Audio Hardware
Topic: Background noise when PTT keyed.
Replies: 19
Views: 16186

Re: Background noise when PTT keyed.

Not forgetting this is the I7 version, if there is a difference.
by M1AQO
Mon Aug 26, 2019 5:41 pm
Forum: Microphones, Speakers & Audio Hardware
Topic: Background noise when PTT keyed.
Replies: 19
Views: 16186

Re: Background noise when PTT keyed.

Does anybody know how much voltage is applied for
the microphone when the Bias is selected?

Thanks

Glenn M1 AQO
by M1AQO
Mon Aug 19, 2019 4:22 pm
Forum: PowerSDR mRX
Topic: User notes 3.49
Replies: 2
Views: 3831

User notes 3.49

Hi,

New to Anan.

Is there a new version of the PowerSDRmrx user
notes ? I’m using 3.49.

I can only find a download with updates from 2012 / 13.

Thanks

Glenn
M1AQO
by M1AQO
Mon Aug 12, 2019 5:35 pm
Forum: Microphones, Speakers & Audio Hardware
Topic: Background noise when PTT keyed.
Replies: 19
Views: 16186

Re: Background noise when PTT keyed.

To save rambling through the post, Anan 7000dle MKII users using mic in (front or rear on radio). If you TX and don’t speak do you hear noise through the monitor and see it on the panadapter ? I am experiencing this noise with and without the mic plugged in with the mic level set. Thanks Glenn P.S. ...
by M1AQO
Mon Aug 12, 2019 1:43 pm
Forum: Microphones, Speakers & Audio Hardware
Topic: Background noise when PTT keyed.
Replies: 19
Views: 16186

Re: Background noise when PTT keyed.

Hi Scott, Thank you for the quick response. If I reduce the Mic gain slider to -10db (minimum setting) the noise disappears on the panadapter with a mic gain reference on the meter of -80db. This is with no mic plugged in. If I do the same procedure with mic plugged in the noise does reduce but is s...
by M1AQO
Mon Aug 12, 2019 1:09 pm
Forum: Microphones, Speakers & Audio Hardware
Topic: Background noise when PTT keyed.
Replies: 19
Views: 16186

Re: Background noise when PTT keyed.

Hi Scott, I've looked at the information but can't figure out the audio path for the USB / Headset routes in relation to the codec. I've taken your suggestion and set up a USB Headset and the noise isn't present when the microphone is keyed, so clearly there is a problem with the front and rear mic ...
by M1AQO
Thu Aug 08, 2019 12:21 pm
Forum: Microphones, Speakers & Audio Hardware
Topic: Background noise when PTT keyed.
Replies: 19
Views: 16186

Re: Background noise when PTT keyed.

Thanks Scott !
by M1AQO
Thu Aug 08, 2019 6:08 am
Forum: Microphones, Speakers & Audio Hardware
Topic: Background noise when PTT keyed.
Replies: 19
Views: 16186

Re: Background noise when PTT keyed.

Hi Scott, Thanks.

I will pick up a USB head set and give it a go.

Once question,

Does the line in or USB connection not enter the CODEC via these routes ?

I thought the digital process started here after the microphone.

Thanks

Glenn
by M1AQO
Wed Aug 07, 2019 4:42 pm
Forum: Microphones, Speakers & Audio Hardware
Topic: Background noise when PTT keyed.
Replies: 19
Views: 16186

Re: Background noise when PTT keyed.

Hi,

Thanks for the advice.

I don’t have a USB headset but I do have a USB
microphone, so I assume I can use VAC2 to test because VAC1is being used for the receive audio.

My 7000 had the built in I7 processor so
I assume I will use the USB on the back of the radio?

Thanks

Glenn
by M1AQO
Wed Aug 07, 2019 7:16 am
Forum: Microphones, Speakers & Audio Hardware
Topic: Background noise when PTT keyed.
Replies: 19
Views: 16186

Re: Background noise when PTT keyed.

I’ve done further testing and the noise isn’t present on TX. When I turn the mic gain down irrespective if there is a mic plugged in or not, the noise disappears. The noise is present through the monitor function and is shown on the panadapter when TX keyed and mic gain is turned up, with or without...
by M1AQO
Wed Aug 07, 2019 4:40 am
Forum: Microphones, Speakers & Audio Hardware
Topic: Background noise when PTT keyed.
Replies: 19
Views: 16186

Re: Background noise when PTT keyed.

It terminates to a trs plug.

Thanks

Glenn
by M1AQO
Tue Aug 06, 2019 11:04 pm
Forum: Microphones, Speakers & Audio Hardware
Topic: Background noise when PTT keyed.
Replies: 19
Views: 16186

Background noise when PTT keyed.

Hi, I’m a new user of a 7000dle MKii. I’m trying to set up the TX audio using the rear mic input with a standard PC Condenser Mic. I have set the Mic to tip, Bias to on and PTT to off utilising the space bar to key up. With the monitor on mic unplugged and the PTT keyed without speaking there is -44...
by M1AQO
Thu Apr 04, 2019 4:22 pm
Forum: Diversity Operations (PowerSDR & Thetis)
Topic: Anan 10E Diversity Receive.
Replies: 2
Views: 7360

Re: Anan 10E Diversity Receive.

Thanks
by M1AQO
Thu Apr 04, 2019 1:36 pm
Forum: Diversity Operations (PowerSDR & Thetis)
Topic: Anan 10E Diversity Receive.
Replies: 2
Views: 7360

Anan 10E Diversity Receive.

Hi
Can anybody tell me if the Anan10e is
capable of Diversity Receive.
Regards
Glenn M1AQO

Go to advanced search