Search found 48 matches
Re: 2.6.8
Dear Richie i'm noticing since update D some problems with PSA. is not working all the time. even if all other setting are unchanged.. Can you be more specific? can you reproduce the issue? does it happen in 'c' versions. Does it happen in 2.6.7? What radio are you using? etc etc Regarding PS-a issu...
Re: 2.6.8
i'm noticing since update D some problems with PSA. is not working all the time. even if all other setting are unchanged.. My opinion for future updates: 1) when use split i think need also be seen on the panadapter . it is noticeable only when trasmitting only if activated the multi rx function. 2)...
Re: 2.6.8
Hi Richie great work. now Thetis become more interesting. The Ctune implementation will be super. if possible for me will be nice also re-organize position of band/filter and other button in better way. there is a lot of un-used space, and when RX2 is activated , become really difficult to understan...
- Wed Aug 07, 2019 3:28 pm
- Forum: PowerSDR mRX
- Topic: ANAN-8000DLE - permanent ADC overload
- Replies: 26
- Views: 26605
Re: ANAN-8000DLE - permanent ADC overload
Already have P2.
reinstalled also the databases. the only think that is different the S-ATT change accordingly to the power used and increase/decrease this value increasing the power in order to don't have the ADC1 overloading coming up
I remember this changing in value also with powersdr and p1.
reinstalled also the databases. the only think that is different the S-ATT change accordingly to the power used and increase/decrease this value increasing the power in order to don't have the ADC1 overloading coming up
I remember this changing in value also with powersdr and p1.
- Wed Aug 07, 2019 5:38 am
- Forum: PowerSDR mRX
- Topic: ANAN-8000DLE - permanent ADC overload
- Replies: 26
- Views: 26605
Re: ANAN-8000DLE - permanent ADC overload
untill now i was using anan 7000 only in low power 10/15 to drive the pa and i have always set the PA Gain in order to don't have more then 50w as max drive. so i never notice this problem. today i needed 100w and was testing the dummy load for 100w peak. so i notice the overdrive adc1 advice. Testi...
- Sun Aug 04, 2019 3:34 am
- Forum: Digital Mode, Rig Control & Logging Software
- Topic: ANAN 7000/8000 - CAT interfaces and SO2R capability?
- Replies: 8
- Views: 9063
Re: ANAN 7000/8000 - CAT interfaces and SO2R capability?
Hi scott i'm trying to TX on RX1 and receive on another band/other antenna on RX2. antennas are set on the 2 different adc and have both ALex on i made some changing also in setup>rx2 to flag or not flag Auto mute/blank on TX but always the same. i go in tx on rx1/vfoA the rx is not receiveng any no...
- Fri Aug 02, 2019 6:42 am
- Forum: Digital Mode, Rig Control & Logging Software
- Topic: Thethis / cw /logging software
- Replies: 5
- Views: 6491
Re: Thethis / cw /logging software
Hi Scott yes you are right is same in all the software. i was still thinking that need only 1 com for the transmission. Now i have created 2 pairs of com 1 for the PTT and 1 for DSP > CW > all is working fine now missing only DDTUL and cwskimmer....if you can check other post and help me there will ...
- Thu Aug 01, 2019 8:03 pm
- Forum: Digital Mode, Rig Control & Logging Software
- Topic: Windows 10 1903 update breaks VSPE
- Replies: 4
- Views: 5863
Re: Windows 10 1903 update breaks VSPE
same problem if you Virtual audio Cable software by i have to reinstall and restart the engine....this is the explenation by the software developer The problem is that upgrading Windows from a release to release is a very complicated procedure. Instead of replacing only particular components on Wind...
- Thu Aug 01, 2019 7:57 pm
- Forum: Digital Mode, Rig Control & Logging Software
- Topic: Thethis / cw /logging software
- Replies: 5
- Views: 6491
Re: Thethis / cw /logging software
What logging software are you using? n1mm,dxlog,n3fjp, qartest, mixwin What virtual serial port software are you using? VSPE How are you keying the radio for CW from the logging software? giving a cat to the PTT control in cat setting. like this is working for fldigi and wsjt and for ssb DVK operat...
- Thu Aug 01, 2019 9:21 am
- Forum: PureSignal Operations (PowerSDR & Thetis)
- Topic: Anan 7000dle and pure signal setting
- Replies: 12
- Views: 13349
Re: Anan 7000dle and pure signal setting
I have done few considerations and tests following previous suggestions 1) i have recalibrated the max power to 20w as 100 level in Thetis scale.Then reduced to 80 level to have 15W as maximum power Consideration: this will let lose linearity to the PA stage? is correct? or the correct way is to use...
- Thu Aug 01, 2019 8:28 am
- Forum: PC's & Homebrew Hardware
- Topic: New PC for Anan Suggestion
- Replies: 10
- Views: 12050
Re: New PC for Anan Suggestion
Updated the PC with this fantastic Intel NUC and all is perfect. Pc is fast , can use chrome and other app all together without heavy usage of the cpu / pc Again for my issue the second lan was not a problem. problem was the CPU / vga card / mb speed @ Gary yes you can use 1 Ethernet card or 2. with...
- Thu Aug 01, 2019 8:11 am
- Forum: Digital Mode, Rig Control & Logging Software
- Topic: Thethis / cw /logging software
- Replies: 5
- Views: 6491
Thethis / cw /logging software
I'm trying to transmit in cw using a logging software. i have no problem for SSB transmissions. But in CW the maximum i get is to go in tx and generate signals BUT no power from the 7000dle. i have tried all the possible settings and logging softwares software , always the same. if i use paddle or i...
- Thu Aug 01, 2019 8:07 am
- Forum: Digital Mode, Rig Control & Logging Software
- Topic: cw skimmer and Thetis
- Replies: 4
- Views: 6256
Re: cw skimmer and Thetis
Was already trying with old version of DDUTIL cannot find at all the LEGACY hardware. i'm using P2 and Thesis only. may be was working with P1 only but don't want go back to try. Also have problem on audio side. there is always a FIX signal (LINE) on the centered frequency. the real center freq is s...
- Mon Jul 29, 2019 12:19 pm
- Forum: PureSignal Operations (PowerSDR & Thetis)
- Topic: Anan 7000dle and pure signal setting
- Replies: 12
- Views: 13349
Re: Anan 7000dle and pure signal setting
the expert 1,3k i'm using need little more then 10w to gave max power. that is 1300w/1400w. so the driving power in normal condition is correct. i remove the att and bypass cable and i use the software PS-A as in the beginning and have this results that i think are correct software ps-a.jpg with thi...
- Sun Jul 28, 2019 2:41 am
- Forum: Digital Mode, Rig Control & Logging Software
- Topic: cw skimmer and Thetis
- Replies: 4
- Views: 6256
Re: cw skimmer and Thetis
followed hat info but also other.
Nothing
First problems is Theys don't trasmit the LO Fre infor to cw skimmer.
Vac are correctly configured.
second also DDutl cannot connect by Cat to Thetis and so cannot use that way.
Nothing
First problems is Theys don't trasmit the LO Fre infor to cw skimmer.
Vac are correctly configured.
second also DDutl cannot connect by Cat to Thetis and so cannot use that way.
- Sat Jul 27, 2019 4:24 am
- Forum: PureSignal Operations (PowerSDR & Thetis)
- Topic: Anan 7000dle and pure signal setting
- Replies: 12
- Views: 13349
Re: Anan 7000dle and pure signal setting
now i have all hardware set.
Xtronic XDC-4so
-20dbpad from Forward port to bypass port
TX with 10w
out 1200w
ATT now goes on 10
but wave form i think is still not correct
Xtronic XDC-4so
-20dbpad from Forward port to bypass port
TX with 10w
out 1200w
ATT now goes on 10
but wave form i think is still not correct
- Fri Jul 26, 2019 11:23 am
- Forum: Digital Mode, Rig Control & Logging Software
- Topic: cw skimmer and Thetis
- Replies: 4
- Views: 6256
cw skimmer and Thetis
I'm trying to let Thetis work with Cw skimmer. i have all setting VPSE-CAT-Thetis-cw skimmer correctly. Vpse as pair com 11-12 thetis cat 11-9600-8-1 Cwskimmer/Omnirig cat 12-9600-8-1 but nothig On my log if i use the direct cat settign is working if i use omnirig no. so means there is a problem wit...
- Thu Jul 25, 2019 6:17 am
- Forum: Macro & MIDI Controller Software, Hardware & Scripts
- Topic: numark mixtrack edge
- Replies: 1
- Views: 4897
- Thu Jul 25, 2019 2:06 am
- Forum: PC's & Homebrew Hardware
- Topic: New PC for Anan Suggestion
- Replies: 10
- Views: 12050
Re: New PC for Anan Suggestion
I add a VGA card and i see some improvement on a simple desktop pc. So with a good designed one will have no problem for sure. On laptop unfortunately cannot improve in anyway. Unless change it. With other sdr i use i didn't care about pc performance because never had this issue. Thanks I really don...
- Fri Jul 19, 2019 7:00 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: 7000 and 8000 Protocol 2 users: what say you?
- Replies: 41
- Views: 42854
Re: 7000 and 8000 Protocol 2 users: what say you?
anda 7000dle P2 ver 2. Thetis 2.6.7 Was using/setting this week and getting no big problems. Since yesterday i'm using with CAT connection and N1mm, but Thetis get randomly crashes When restart all settings are there, just don't keep the drive power selected before the crash. even if have saved the ...
- Fri Jul 19, 2019 11:19 am
- Forum: PC's & Homebrew Hardware
- Topic: New PC for Anan Suggestion
- Replies: 10
- Views: 12050
Re: New PC for Anan Suggestion
Hello i have tryend already all the possible metods to avoid background processes ,even before anan. this is Thesis on stadby mode. is more then 30%... task manager.jpg my CPu is I-7600U , but i found out that U versions are slower and for laptop to extend battery life. this one has only 2 cores. i ...
- Fri Jul 19, 2019 10:42 am
- Forum: PureSignal Operations (PowerSDR & Thetis)
- Topic: Anan 7000dle and pure signal setting
- Replies: 12
- Views: 13349
Anan 7000dle and pure signal setting
Hello trying to set anan 7000dle with expert 1,3k and Xtronic XDC-1 i'm setting the xpert at low-mid level for now that shuld have 600 to 800kw outut power. with input power of 5w. With 10w in will give more then 1kw. but for the moment i don't have an attenuator pad. so will not try for the moment ...
- Thu Jul 18, 2019 6:08 pm
- Forum: Digital Mode, Rig Control & Logging Software
- Topic: N1MM SO2V and 7000dle
- Replies: 4
- Views: 6304
Re: N1MM SO2V and 7000dle
Hi Rafael unfortunately did't have the time to try or reply before. i have also found the solution and let it work now. but for my experience the solution is different then your suggestion. 1) you are right in on RX2 and MultirRx to be activated 2) no need a second antenna. it depends only how you r...
- Thu Jul 18, 2019 8:53 am
- Forum: PC's & Homebrew Hardware
- Topic: New PC for Anan Suggestion
- Replies: 10
- Views: 12050
New PC for Anan Suggestion
Hello i'm using my laptop with I7-7600U-12gb ram-ssd at moment, with medium low result. i'm not having audio glitches problems but still the cpu is stressed at 30% constantly and if i open browser (chrome) and log or other software then all the system is super slow. having 2 LAn is not helping anywa...
- Wed Jul 17, 2019 2:47 am
- Forum: Digital Mode, Rig Control & Logging Software
- Topic: ANAN 7000/8000 - CAT interfaces and SO2R capability?
- Replies: 8
- Views: 9063
Re: ANAN 7000/8000 - CAT interfaces and SO2R capability?
with new Firmware P2 and Thetis will be possible have SO2R?
or still need be waiting future developments? if still not , have any idea of development time for this ?
thanks
Andy
or still need be waiting future developments? if still not , have any idea of development time for this ?
thanks
Andy
- Tue Jul 16, 2019 5:25 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: 7000 and 8000 Protocol 2 users: what say you?
- Replies: 41
- Views: 42854
Re: 7000 and 8000 Protocol 2 users: what say you?
you are right in Thesis : DDC2 is old Rx1 DDC3 is old Rx2 ADC0 is old ADC1 ADC1 is old ADC2 found out where change Ant 1/2/3 for rx and tx (sorry) But when Diversity is enabled DDC0 have to be set to ADC0 in order to see Ant1/2/3 on DDC2(old Rx1) DDC1 havo be to set to ADC1 in order to see DDC3(old ...
- Tue Jul 16, 2019 11:00 am
- Forum: Protocol 2 Firmware (all radios)
- Topic: 7000 and 8000 Protocol 2 users: what say you?
- Replies: 41
- Views: 42854
Re: 7000 and 8000 Protocol 2 users: what say you?
New test with P2 2.0 and 1.8 firmware and get the same results 1) antenna can be changed only using the DDC2 button. the DDC1 button is not working at all. 2) cannot have antenna 1 and 2 connected on same time , means cannot use the 2 different ADCs 3) Diversity when actived has not noise any more b...
- Mon Jul 15, 2019 2:01 am
- Forum: Protocol 2 Firmware (all radios)
- Topic: 7000 and 8000 Protocol 2 users: what say you?
- Replies: 41
- Views: 42854
Re: 7000 and 8000 Protocol 2 users: what say you?
Installed P2 v1.9 and thesis 2.6.7 on anan 7000dle First bad news: 1) only Antenna 1 is working. all others are unusable. 2) Diversity is unusable. on ant 1 have high noise . ant 2 is not working as before explained i don't see Alex button, but i think there was already an explanation/discussion for...
- Sun Jul 14, 2019 9:23 am
- Forum: Apache Labs Radios: Buy/Sell/Trade
- Topic: Anan 7000dle
- Replies: 0
- Views: 4680
Anan 7000dle
Selling anan 7000 dle
preferable Eu shipment
Selling at 2700Euro included shipment
preferable Eu shipment
Selling at 2700Euro included shipment
- Tue Apr 09, 2019 1:59 pm
- Forum: PC's & Homebrew Hardware
- Topic: anan 7000 and pc issue
- Replies: 5
- Views: 9741
Re: anan 7000 and pc issue
pls check my reply below OK, two more questions: 1. Did you adjust network metrics on both NICs as per Rob's instructions? YES DONE CORRECTLY 2. Did you set the two NICs to different subnets? Just as an example, your main NIC would be on 192.168.1.1 (probably using DHCP from your router) and your r...