Search found 48 matches

by ik7ytt
Mon Nov 04, 2019 11:35 am
Forum: Thetis
Topic: 2.6.8
Replies: 565
Views: 33113

Re: 2.6.8

Dear Richie i'm noticing since update D some problems with PSA. is not working all the time. even if all other setting are unchanged.. Can you be more specific? can you reproduce the issue? does it happen in 'c' versions. Does it happen in 2.6.7? What radio are you using? etc etc Regarding PS-a issu...
by ik7ytt
Sun Nov 03, 2019 11:03 pm
Forum: Thetis
Topic: 2.6.8
Replies: 565
Views: 33113

Re: 2.6.8

i'm noticing since update D some problems with PSA. is not working all the time. even if all other setting are unchanged.. My opinion for future updates: 1) when use split i think need also be seen on the panadapter . it is noticeable only when trasmitting only if activated the multi rx function. 2)...
by ik7ytt
Sun Sep 22, 2019 11:09 pm
Forum: Thetis
Topic: 2.6.8
Replies: 565
Views: 33113

Re: 2.6.8

Hi Richie great work. now Thetis become more interesting. The Ctune implementation will be super. if possible for me will be nice also re-organize position of band/filter and other button in better way. there is a lot of un-used space, and when RX2 is activated , become really difficult to understan...
by ik7ytt
Wed Aug 07, 2019 3:28 pm
Forum: PowerSDR mRX
Topic: ANAN-8000DLE - permanent ADC overload
Replies: 26
Views: 6713

Re: ANAN-8000DLE - permanent ADC overload

Already have P2.

reinstalled also the databases. the only think that is different the S-ATT change accordingly to the power used and increase/decrease this value increasing the power in order to don't have the ADC1 overloading coming up

I remember this changing in value also with powersdr and p1.
by ik7ytt
Wed Aug 07, 2019 5:38 am
Forum: PowerSDR mRX
Topic: ANAN-8000DLE - permanent ADC overload
Replies: 26
Views: 6713

Re: ANAN-8000DLE - permanent ADC overload

untill now i was using anan 7000 only in low power 10/15 to drive the pa and i have always set the PA Gain in order to don't have more then 50w as max drive. so i never notice this problem. today i needed 100w and was testing the dummy load for 100w peak. so i notice the overdrive adc1 advice. Testi...
by ik7ytt
Sun Aug 04, 2019 3:34 am
Forum: Digital Mode, Rig Control & Logging Software
Topic: ANAN 7000/8000 - CAT interfaces and SO2R capability?
Replies: 6
Views: 1456

Re: ANAN 7000/8000 - CAT interfaces and SO2R capability?

Hi scott i'm trying to TX on RX1 and receive on another band/other antenna on RX2. antennas are set on the 2 different adc and have both ALex on i made some changing also in setup>rx2 to flag or not flag Auto mute/blank on TX but always the same. i go in tx on rx1/vfoA the rx is not receiveng any no...
by ik7ytt
Fri Aug 02, 2019 6:42 am
Forum: Digital Mode, Rig Control & Logging Software
Topic: Thethis / cw /logging software
Replies: 5
Views: 780

Re: Thethis / cw /logging software

Hi Scott yes you are right is same in all the software. i was still thinking that need only 1 com for the transmission. Now i have created 2 pairs of com 1 for the PTT and 1 for DSP > CW > all is working fine now missing only DDTUL and cwskimmer....if you can check other post and help me there will ...
by ik7ytt
Thu Aug 01, 2019 8:03 pm
Forum: Digital Mode, Rig Control & Logging Software
Topic: Windows 10 1903 update breaks VSPE
Replies: 4
Views: 728

Re: Windows 10 1903 update breaks VSPE

same problem if you Virtual audio Cable software by i have to reinstall and restart the engine....this is the explenation by the software developer The problem is that upgrading Windows from a release to release is a very complicated procedure. Instead of replacing only particular components on Wind...
by ik7ytt
Thu Aug 01, 2019 7:57 pm
Forum: Digital Mode, Rig Control & Logging Software
Topic: Thethis / cw /logging software
Replies: 5
Views: 780

Re: Thethis / cw /logging software

What logging software are you using? n1mm,dxlog,n3fjp, qartest, mixwin What virtual serial port software are you using? VSPE How are you keying the radio for CW from the logging software? giving a cat to the PTT control in cat setting. like this is working for fldigi and wsjt and for ssb DVK operat...
by ik7ytt
Thu Aug 01, 2019 9:21 am
Forum: PureSignal Operations
Topic: Anan 7000dle and pure signal setting
Replies: 12
Views: 2434

Re: Anan 7000dle and pure signal setting

I have done few considerations and tests following previous suggestions 1) i have recalibrated the max power to 20w as 100 level in Thetis scale.Then reduced to 80 level to have 15W as maximum power Consideration: this will let lose linearity to the PA stage? is correct? or the correct way is to use...
by ik7ytt
Thu Aug 01, 2019 8:28 am
Forum: PC's & Homebrew Hardware
Topic: New PC for Anan Suggestion
Replies: 10
Views: 2243

Re: New PC for Anan Suggestion

Updated the PC with this fantastic Intel NUC and all is perfect. Pc is fast , can use chrome and other app all together without heavy usage of the cpu / pc Again for my issue the second lan was not a problem. problem was the CPU / vga card / mb speed @ Gary yes you can use 1 Ethernet card or 2. with...
by ik7ytt
Thu Aug 01, 2019 8:11 am
Forum: Digital Mode, Rig Control & Logging Software
Topic: Thethis / cw /logging software
Replies: 5
Views: 780

Thethis / cw /logging software

I'm trying to transmit in cw using a logging software. i have no problem for SSB transmissions. But in CW the maximum i get is to go in tx and generate signals BUT no power from the 7000dle. i have tried all the possible settings and logging softwares software , always the same. if i use paddle or i...
by ik7ytt
Thu Aug 01, 2019 8:07 am
Forum: Digital Mode, Rig Control & Logging Software
Topic: cw skimmer and Thetis
Replies: 4
Views: 720

Re: cw skimmer and Thetis

Was already trying with old version of DDUTIL cannot find at all the LEGACY hardware. i'm using P2 and Thesis only. may be was working with P1 only but don't want go back to try. Also have problem on audio side. there is always a FIX signal (LINE) on the centered frequency. the real center freq is s...
by ik7ytt
Mon Jul 29, 2019 12:19 pm
Forum: PureSignal Operations
Topic: Anan 7000dle and pure signal setting
Replies: 12
Views: 2434

Re: Anan 7000dle and pure signal setting

the expert 1,3k i'm using need little more then 10w to gave max power. that is 1300w/1400w. so the driving power in normal condition is correct. i remove the att and bypass cable and i use the software PS-A as in the beginning and have this results that i think are correct software ps-a.jpg with thi...
by ik7ytt
Sun Jul 28, 2019 2:41 am
Forum: Digital Mode, Rig Control & Logging Software
Topic: cw skimmer and Thetis
Replies: 4
Views: 720

Re: cw skimmer and Thetis

followed hat info but also other.
Nothing

First problems is Theys don't trasmit the LO Fre infor to cw skimmer.
Vac are correctly configured.

second also DDutl cannot connect by Cat to Thetis and so cannot use that way.
by ik7ytt
Sat Jul 27, 2019 4:24 am
Forum: PureSignal Operations
Topic: Anan 7000dle and pure signal setting
Replies: 12
Views: 2434

Re: Anan 7000dle and pure signal setting

now i have all hardware set.

Xtronic XDC-4so
-20dbpad from Forward port to bypass port

TX with 10w
out 1200w

ATT now goes on 10

but wave form i think is still not correct

test 5in-1300w.jpg
test 5in-1300w.jpg (49.2 KiB) Viewed 2282 times
by ik7ytt
Fri Jul 26, 2019 11:23 am
Forum: Digital Mode, Rig Control & Logging Software
Topic: cw skimmer and Thetis
Replies: 4
Views: 720

cw skimmer and Thetis

I'm trying to let Thetis work with Cw skimmer. i have all setting VPSE-CAT-Thetis-cw skimmer correctly. Vpse as pair com 11-12 thetis cat 11-9600-8-1 Cwskimmer/Omnirig cat 12-9600-8-1 but nothig On my log if i use the direct cat settign is working if i use omnirig no. so means there is a problem wit...
by ik7ytt
Thu Jul 25, 2019 6:17 am
Forum: MIDI Controllers
Topic: numark mixtrack edge
Replies: 1
Views: 688

numark mixtrack edge

This one should work too?

https://www.numark.com/product/mixtrack-edge

right?
by ik7ytt
Thu Jul 25, 2019 2:06 am
Forum: PC's & Homebrew Hardware
Topic: New PC for Anan Suggestion
Replies: 10
Views: 2243

Re: New PC for Anan Suggestion

I add a VGA card and i see some improvement on a simple desktop pc. So with a good designed one will have no problem for sure. On laptop unfortunately cannot improve in anyway. Unless change it. With other sdr i use i didn't care about pc performance because never had this issue. Thanks I really don...
by ik7ytt
Fri Jul 19, 2019 7:00 pm
Forum: Protocol 2 (all radios)
Topic: 7000 and 8000 Protocol 2 users: what say you?
Replies: 41
Views: 7091

Re: 7000 and 8000 Protocol 2 users: what say you?

anda 7000dle P2 ver 2. Thetis 2.6.7 Was using/setting this week and getting no big problems. Since yesterday i'm using with CAT connection and N1mm, but Thetis get randomly crashes When restart all settings are there, just don't keep the drive power selected before the crash. even if have saved the ...
by ik7ytt
Fri Jul 19, 2019 11:19 am
Forum: PC's & Homebrew Hardware
Topic: New PC for Anan Suggestion
Replies: 10
Views: 2243

Re: New PC for Anan Suggestion

Hello i have tryend already all the possible metods to avoid background processes ,even before anan. this is Thesis on stadby mode. is more then 30%... task manager.jpg my CPu is I-7600U , but i found out that U versions are slower and for laptop to extend battery life. this one has only 2 cores. i ...
by ik7ytt
Fri Jul 19, 2019 10:42 am
Forum: PureSignal Operations
Topic: Anan 7000dle and pure signal setting
Replies: 12
Views: 2434

Anan 7000dle and pure signal setting

Hello trying to set anan 7000dle with expert 1,3k and Xtronic XDC-1 i'm setting the xpert at low-mid level for now that shuld have 600 to 800kw outut power. with input power of 5w. With 10w in will give more then 1kw. but for the moment i don't have an attenuator pad. so will not try for the moment ...
by ik7ytt
Thu Jul 18, 2019 6:08 pm
Forum: Digital Mode, Rig Control & Logging Software
Topic: N1MM SO2V and 7000dle
Replies: 4
Views: 1236

Re: N1MM SO2V and 7000dle

Hi Rafael unfortunately did't have the time to try or reply before. i have also found the solution and let it work now. but for my experience the solution is different then your suggestion. 1) you are right in on RX2 and MultirRx to be activated 2) no need a second antenna. it depends only how you r...
by ik7ytt
Thu Jul 18, 2019 8:53 am
Forum: PC's & Homebrew Hardware
Topic: New PC for Anan Suggestion
Replies: 10
Views: 2243

New PC for Anan Suggestion

Hello i'm using my laptop with I7-7600U-12gb ram-ssd at moment, with medium low result. i'm not having audio glitches problems but still the cpu is stressed at 30% constantly and if i open browser (chrome) and log or other software then all the system is super slow. having 2 LAn is not helping anywa...
by ik7ytt
Wed Jul 17, 2019 2:47 am
Forum: Digital Mode, Rig Control & Logging Software
Topic: ANAN 7000/8000 - CAT interfaces and SO2R capability?
Replies: 6
Views: 1456

Re: ANAN 7000/8000 - CAT interfaces and SO2R capability?

with new Firmware P2 and Thetis will be possible have SO2R?

or still need be waiting future developments? if still not , have any idea of development time for this ?

thanks
Andy
by ik7ytt
Tue Jul 16, 2019 5:25 pm
Forum: Protocol 2 (all radios)
Topic: 7000 and 8000 Protocol 2 users: what say you?
Replies: 41
Views: 7091

Re: 7000 and 8000 Protocol 2 users: what say you?

you are right in Thesis : DDC2 is old Rx1 DDC3 is old Rx2 ADC0 is old ADC1 ADC1 is old ADC2 found out where change Ant 1/2/3 for rx and tx (sorry) But when Diversity is enabled DDC0 have to be set to ADC0 in order to see Ant1/2/3 on DDC2(old Rx1) DDC1 havo be to set to ADC1 in order to see DDC3(old ...
by ik7ytt
Tue Jul 16, 2019 11:00 am
Forum: Protocol 2 (all radios)
Topic: 7000 and 8000 Protocol 2 users: what say you?
Replies: 41
Views: 7091

Re: 7000 and 8000 Protocol 2 users: what say you?

New test with P2 2.0 and 1.8 firmware and get the same results 1) antenna can be changed only using the DDC2 button. the DDC1 button is not working at all. 2) cannot have antenna 1 and 2 connected on same time , means cannot use the 2 different ADCs 3) Diversity when actived has not noise any more b...
by ik7ytt
Mon Jul 15, 2019 2:01 am
Forum: Protocol 2 (all radios)
Topic: 7000 and 8000 Protocol 2 users: what say you?
Replies: 41
Views: 7091

Re: 7000 and 8000 Protocol 2 users: what say you?

Installed P2 v1.9 and thesis 2.6.7 on anan 7000dle First bad news: 1) only Antenna 1 is working. all others are unusable. 2) Diversity is unusable. on ant 1 have high noise . ant 2 is not working as before explained i don't see Alex button, but i think there was already an explanation/discussion for...
by ik7ytt
Sun Jul 14, 2019 9:23 am
Forum: Apache Labs Radios: Buy/Sell/Trade
Topic: Anan 7000dle
Replies: 0
Views: 1064

Anan 7000dle

Selling anan 7000 dle bought in jannuary 2019 from ham radio outlet.

Selling at 2500$ Ww delivery included.
by ik7ytt
Tue Apr 09, 2019 1:59 pm
Forum: PC's & Homebrew Hardware
Topic: anan 7000 and pc issue
Replies: 5
Views: 2701

Re: anan 7000 and pc issue

pls check my reply below OK, two more questions: 1. Did you adjust network metrics on both NICs as per Rob's instructions? YES DONE CORRECTLY 2. Did you set the two NICs to different subnets? Just as an example, your main NIC would be on 192.168.1.1 (probably using DHCP from your router) and your r...

Go to advanced search