Thank you for your help...

73's Rob

Radio Connector This connector is used to interface to all radios except Icom. You can use the same cable you would normally connect between the radio and a computer except when using the band data outputs from Yaesu and K3 radios. It is preferred that you use the RS-232 data from the radio and not ...

I Take there is no voltage port on the db-9 on the back of the 8000

Hi Scott

found this information on the bandmaster3 for Data


pin 1 BAND data A

pin 2 Band Data From Radio

pin 3 Band Data from Radio

pin 4 Band Data D

pin 5 Ground Screen

pin 6 Band Data B

pin 7 5v For CTS

pin 8 Band Data C

pin 9 icom voltage

Hopefully this will be helpful scot

Wonder if you can help me , I am new to Anan radio , just purchased 8000 , What I like to know is I have a band decoder switch which selects my different antennas at my station. The protocol is bcd. I take it the dB-9 on the back of the Anan will do that. What I want to know is the pin out on the An...