Search found 17 matches

by artcomm
Sat Sep 26, 2020 12:45 pm
Forum: Thetis
Topic: Seq Errors Explained
Replies: 52
Views: 135742

Re: Seq Errors Explained

If the Seq errors are not causing artifacts in the TX audio and FT8 and we're tired of seeing the reported code errors, what I did here is go into Setup/Appearance/RX Display, and on the top right side under Cursor/Peak Readout select Background drop down arrow and choose the Gray color. It put's an...
by artcomm
Sun Aug 30, 2020 5:00 pm
Forum: Thetis
Topic: Seq Errors Explained
Replies: 52
Views: 135742

Re: Seq Errors Explained

No more posting log errors.. Is there a fix now? Any new Thetis updates? we should know about. Feel like Abandon-Ware Soft & Firm ??????
by artcomm
Thu Jul 23, 2020 3:11 pm
Forum: Thetis
Topic: Band switched while in TX
Replies: 8
Views: 5113

Re: Band switched while in TX

I heard Richie is tied up on the SunSDR project. Which is a money make for him so I dont blame him one bit. Im so grateful for everything he did for us this last year or more. I was really looking forward to the meter update he was planning so we could see all the multi meters at one time. Not sure...
by artcomm
Sun Jul 19, 2020 1:01 pm
Forum: Thetis
Topic: Band switched while in TX
Replies: 8
Views: 5113

Re: Band switched while in TX

I'm using the same version of Thetis, after reading your post I tried switching bands while TX'ing into a dummy load and yes that happen here as well. Not a good situation with an extreme mismatch or power output to a low input drive style solid state Amp depending on the Drive setting last set on a...
by artcomm
Thu Jan 09, 2020 3:27 am
Forum: Thetis
Topic: 2.6.9
Replies: 597
Views: 359173

Re: 2.6.9

Thank you.. Got it
by artcomm
Wed Jan 08, 2020 3:57 am
Forum: Thetis
Topic: 2.6.9
Replies: 597
Views: 359173

Re: 2.6.9

Hello Gents, hoping someone here can direct me to the pro2 ver2.0-pre8 Firmware maybe a URL? or email to me n4qnt@twc.com

Thank you,
Art
by artcomm
Wed Nov 27, 2019 3:49 pm
Forum: Thetis
Topic: 2.6.9
Replies: 597
Views: 359173

Re: 2.6.9

DCC2 s0=0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 9 9 5 2 0 0 0 0 0 0 0 11/27 10:46:11:467 s1=0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 9 9 5 0 0 0 0 0 0 0 0 11/27 10:46:11:467 s2=0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 9 9 0 0 0 0 0 0 0 0 0 11/27 10...
by artcomm
Fri Nov 22, 2019 3:13 am
Forum: Thetis
Topic: 2.6.9
Replies: 597
Views: 359173

Re: 2.6.9

https://github.com/w5wc/Thetis/releases/tag/v2.6.9

The best Thetis yet .. Thank you and keep up the great work... solid as a rock here with 2.0 pre_2
by artcomm
Wed Sep 11, 2019 3:28 pm
Forum: Thetis
Topic: 2.6.8
Replies: 557
Views: 314662

Re: 2.6.8

I noticed when doing a clean install, the program is asking for the latest version of .net frameworks... https://dotnet.microsoft.com/download/dotnet-framework, after that it worked like a charm... Also found a glitch when you go into Setup / Appearance and check the LED box, VFO A and B goes haywir...
by artcomm
Mon Jun 10, 2019 7:36 pm
Forum: Thetis
Topic: Seq Errors Explained
Replies: 52
Views: 135742

Re: Seq Errors Explained

Hi Scott, thank you for your insight with my questions.. Seem's like after flashing the latest Pro2 v2.0 (Pre-2) firmware and complete uninstall of Thetis via Rev-uninstall and also after clean install and reset the database to start from scratch, the last two day's have been Joy. Not one Error Code...
by artcomm
Fri Jun 07, 2019 5:22 pm
Forum: Thetis
Topic: Seq Errors Explained
Replies: 52
Views: 135742

Re: Seq Errors Explained

Exactly Scott, the rub is... I don’t hear the white noise pops when using the other software.. Only happens with Thetis.. Is this something that is being addressed? I read some post with other users with Thetis and Sequence Errors =8 =40 and white noise when the errors appear...

Thank you
Art
by artcomm
Fri Jun 07, 2019 4:14 pm
Forum: Thetis
Topic: Seq Errors Explained
Replies: 52
Views: 135742

Re: Seq Errors Explained

Hello Scott, thank you for your fast response. Very interesting about a potential heat problem, my room is usually cool at 72 with the AC on all time. When using Mrx PSDR or the Console V3 after shuffling firmware's for testing of course we don’t see Seq Error reporting, but I never get that white n...
by artcomm
Fri Jun 07, 2019 2:22 pm
Forum: Thetis
Topic: Seq Errors Explained
Replies: 52
Views: 135742

Re: Seq Errors Explained

Hello Scott, lately with Thetis 2.6.7 w/pro2 v1.9 the only Seq errors I experience is =8 & =40 on receive and notice white noise pop's from my headphone or speakers when the errors start flashing... I'll power down the 7K MII non-pc, reboot the PC and 5 to 10 mins it's starts again.. Any thought...
by artcomm
Wed Apr 24, 2019 1:58 am
Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
Topic: Anan 7000DLE Mk-II PA output.
Replies: 10
Views: 10674

Re: Anan 7000DLE Mk-II PA output.

I just sent an email to Anan support about this subject and very eagar to hear thier reply... --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------...
by artcomm
Fri Mar 22, 2019 4:02 pm
Forum: Thetis
Topic: Thetis with NEW 7000 MKII
Replies: 1
Views: 2772

Thetis with NEW 7000 MKII

Looking for some feedback.. Any info using the latest Thetis version with Pro2 1.6 and Pure Signal with Amplifier not working.. The radio was shipped with Pro1- 2.4 which works fine with mRX OPSDR 3.4.9 and Pure Signal with Coupler and Amp 1200 watts.. But a no goes with Pro2 and Thetis.. Was told b...
by artcomm
Sat Jan 19, 2019 6:33 am
Forum: Thetis
Topic: PureSignal 2.0 unreliable with Thetis v2.6.0
Replies: 9
Views: 8365

Re: PureSignal 2.0 unreliable with Thetis v2.6.0

Tried Pro-2 (1.6.rbf) tonight with Thetis 2.6.2 and seems very stable now with Pure Single :D Worked every time... Wondering if they might add when TX with Panafall to control the Waterfall High and Low levels ????

Thank you,
Art C. N4QNT
by artcomm
Fri Jan 18, 2019 3:17 pm
Forum: Thetis
Topic: PureSignal 2.0 unreliable with Thetis v2.6.0
Replies: 9
Views: 8365

Re: PureSignal 2.0 unreliable with Thetis v2.6.0

Same issue here with latest 7000dle, using latest P1-Firm and latest psdr PS is stable as it can be, no pure signal issues. I’m using an intel gig ethernet PCIe directly to rig, do a clean write with latest P2-Firm and latest downloadable Thietis, build a scratch database and PS is unstable.. 60 wat...

Go to advanced search