Those settings are saved in your transmit profile. Unless you save the profile after making adjustments they will revert to previous settings next time you turn off/on the radio or change transmit profiles.
73
David
A92GE
Search found 14 matches
- Sat Aug 27, 2022 4:43 am
- Forum: Thetis
- Topic: Ring Buffer and PortAudio latency numbers changing
- Replies: 2
- Views: 774
- Tue Mar 08, 2022 7:05 am
- Forum: Thetis
- Topic: Thetis v2.8.11 - UPDATES and current issues
- Replies: 1752
- Views: 880812
Re: Thetis v2.8.11 - UPDATES and current issues
Sorry, I missed a page or so of the discussion - you move too fast! I am up to speed now, thanks.
David
A92GE
David
A92GE
- Tue Mar 08, 2022 5:59 am
- Forum: Thetis
- Topic: Thetis v2.8.11 - UPDATES and current issues
- Replies: 1752
- Views: 880812
Re: Thetis v2.8.11 - UPDATES and current issues
Release 21k8 was fine, but yesterday I upgraded to the latest rc4 and the AGC tracking feature no longer works. Now when tracking is engaged instead of the AGC sitting 20dB above the noise line, it now just sits exactly on the noise line without the 20dB offset. Am I missing a setting somewhere? 73 ...
- Sun Aug 30, 2020 8:19 am
- Forum: Transverters
- Topic: Transverters
- Replies: 2
- Views: 5605
Transverters
I have just tried to interface my Anan200D (rev24 PA) with a transverter but I am receiving HF signals and transverter signals at the same time. I have searched the internet for a solution but cannot find anything. I am using Protocol 1 ver 5.0. with OpenHPSDR .RX ver 3.4.9. I am using Protocol 1 be...
- Fri Feb 08, 2019 1:32 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: 200D Protocol 2 users: what say you?
- Replies: 87
- Views: 69089
Re: 200D Protocol 2 users: what say you?
As a follow up to my previous posts regarding the failure of my Anan to run Protocol 2, I have now tried to connect the radio through a 1000Mbps switch rather than a direct connection to my computer. Sadly I have still been unsuccessful. The computer connects to the switch at I000Mbps speed as repor...
- Thu Jan 03, 2019 4:43 am
- Forum: Protocol 2 Firmware (all radios)
- Topic: 200D Protocol 2 users: what say you?
- Replies: 87
- Views: 69089
Re: 200D Protocol 2 users: what say you?
HI Rick, Thank you for your interest in my problem. Firstly when trying the 1GB Protocol 2 v1.4 I can confirm that after loading the software the light adjacent to the power button is pulsing as normal. There is just no communications with Thetis. The issue appears to be that the radio remains in 10...
- Wed Jan 02, 2019 2:23 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: 200D Protocol 2 users: what say you?
- Replies: 87
- Views: 69089
Re: 200D Protocol 2 users: what say you?
Thank you for your help guys. I can confirm that the firmware is downloaded correctly - correct size etc. I can confirm that the network adapter is 1GB compatible (works at 1GB if plugged into my router). When Protocol 2 has been loaded my network adapter will not auto negotiate 1 GB with the radio....
- Tue Jan 01, 2019 11:17 am
- Forum: Protocol 2 Firmware (all radios)
- Topic: 200D Protocol 2 users: what say you?
- Replies: 87
- Views: 69089
Re: 200D Protocol 2 users: what say you?
I have tried both Bootloader and Programmer. With the radio set up with Protocol 1 and fixed IP address, HPSDRProgrammer (Ver 2.0.4.10) will find the radio and I am able to program with new protocol (Today Orion_NP_ v1.4). It will go through the sequence of erasing device, programming device (both s...
- Mon Dec 31, 2018 3:11 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: 200D Protocol 2 users: what say you?
- Replies: 87
- Views: 69089
Re: 200D Protocol 2 users: what say you?
WU2O
Sorry for the belated reply as I was travelling for Christmas. So also a Merry Christmas and a happy New Year to you and anyone reading this.
I am using static addressing: computer is set at 192.168.0.1 and radio at 192.168.0.2.
73
David
A92GE
Sorry for the belated reply as I was travelling for Christmas. So also a Merry Christmas and a happy New Year to you and anyone reading this.
I am using static addressing: computer is set at 192.168.0.1 and radio at 192.168.0.2.
73
David
A92GE
- Mon Dec 10, 2018 7:22 am
- Forum: Protocol 2 Firmware (all radios)
- Topic: 200D Protocol 2 users: what say you?
- Replies: 87
- Views: 69089
Re: 200D Protocol 2 users: what say you?
As with all other versions of this protocol I can load the firmware but the radio is not recognised upon reboot. The radio is connected directly to the network port using a high quality cable but will not connect. The network adapter in Windows shows as disconnected. Have tried setting the network i...
- Wed Nov 14, 2018 3:43 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: New Protocol Update
- Replies: 17
- Views: 16332
Re: New Protocol Update
Interesting and slightly acrimonious discussion, but for one that cannot get Protocol 2 to work in any form on my 200D, I wonder if "fuse" problems are the only issue? I also can only use ver 5.0 of Protocol 1; the others break Pure Signal for me.
73 David
73 David
- Mon Nov 12, 2018 3:04 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: New Protocol Update
- Replies: 17
- Views: 16332
Re: New Protocol Update
Thought I would bump this. Any news on progress?
73
David
73
David
- Sat Oct 06, 2018 7:14 am
- Forum: Orion Firmware (200D)
- Topic: Flashing ANAN 200 D with New Protocol
- Replies: 6
- Views: 14929
Re: Flashing ANAN 200 D with New Protocol
Thanks. I guess I am unlucky. The rbf files that I am installing are the correct size (1856Kb for v1.1) and take about the same time to upload as the version 1 protocol. So I am going with your (b) response - will not work with my radio.
73
David
73
David
- Fri Oct 05, 2018 9:24 am
- Forum: Orion Firmware (200D)
- Topic: Flashing ANAN 200 D with New Protocol
- Replies: 6
- Views: 14929
Re: Flashing ANAN 200 D with New Protocol
I wondered if you made any progress? I tried many times (using various releases) to install the Protocol 2 firmware. It has loaded successfully but never worked. I also have a direct Ethernet connection to computer with high quality CAT6 cable. The only notes I can find all assume that it is an erro...