I've been running this on P2 2.8.11 for several months. All of a sudden when I use diversity, with RX1+RX2 and my second RX antenna just for this, I'm getting broadcast inference from the below 160 on all bands. I have carrier plus audio distortion every 10KC. Is this a hardware issue? I've deleted...

If you don"t have the id program do you use any other application where the input to the audio changes from mike to VAC to transmit audio automatically using switching of the audio input from mike to VAC ?

Does anyone have the RoMac id'er working on SDR Console ?

Cecil/W4CM

try Thetis v2.7.0 (3/1/20) MWOLGE (a3)

"IF".....you have the box checked in the tab as stated above, make sure you do not have the adjustment of the gain in the slider above or below the viewing area of the spectrum.
What is the number of the gain slider on the slider ?
Is the line a color you can see ?

You need to set gain controls in SDR Console.
Transmit tab, options, audio in, gains, drive slider.
Set for each band.

My manual this is on page 55: Download the HPSDRBootloader installer for Windows HERE. Install the HPSDRBootloader software. Connect the radio to your computer network using an ethernet cable. Place the radio into bootloader mode using the slide switch on the bottom panel. Power the radio ON. Having...

Check page 55 of the operating manual

hello, i connect externa ptt on back ptt in jack. I enabled PTT ON ìn setup PTT is ok on lsb, usb, fm, am, digu, digl but no in CW PTT seems disabled it's correct or is a bug??? FW 2.0b - Thetis 2.6.9 - anan 7000 Do you not hear a relay engage ? It will not transmit a carrier with the ptt only

Just some thoughts on the new option. If the new timer was expanded into a full id'er option the other functions could be : Keys radio and plays audio recorded file or cw id file. Detects radio keyed and wait for un-key to play id Option to sync with clock and id on the tens. This would sync all use...

PS working great with b3_1 on 7000DLE. My short wish list would be the ability to choose a different color for SPOT stations than being the same color as grid text color. Implement on main display Rx/Xmtr meter for VFO A / Rx 1 and additional functional meter for VFO B/ Rx2 that works with function ...

UPDATE Hi all, Please try : https://www.dropbox.com/s/150bv7vdxfjsnn7/Thetis_1905_111219_269_b3.zip?dl=0 This version includes a work in progress historic meter data. It can be enabled in setup>display>general in the multimeter group. Colour/alpha is set in appearance> meter. Readings are currently...

An old issue has started again, no audio playback from recorded message in transmit. I see the presence of audio when in playback mode via the up and down levels on the VOX bar but the transmitter shows no output When I try playback on transmit I have tried keying MOX first then play and visa versa...

An old issue has started again, no audio playback from recorded message in transmit. I see the presence of audio when in playback mode via the up and down levels on the VOX bar but the transmitter shows no output When I try playback on transmit I have tried keying MOX first then play and visa versa ...

Mark one or more of the following Checkboxes for your prefered method of TX activation: Setup/Audio/VAC1/Checkbox "Allow PTT to override/bypass VAC for Phone" Setup/Audio/VAC1/Checkbox "Allow MOX to override/bypass VAC for Phone" Setup/Audio/VAC1/Checkbox "Allow SPACE to ov...

UPDATE Hi, small update here : https://www.dropbox.com/s/3zet1lfmv1pel3u/Thetis_1735_021119_e2.zip?dl=0 Richie. (11/1/19) e2 ⋅ fix: mouse wheel over vfo when vfo highlighted in blue(selected) deselects and enables mouse wheel vfo changing ⋅ fix: z-order on vfoahover panel moved ...

What about the question about the video card ?
Thanks

Wonder if I could get some help on choosing a 4k monitor/video card ? I am wanting to take advantage of the Thetis and the DirectX engine. My I5 Dell computer per Dell has a HDMI port on the PC is only a 1.2 which is why it can only support up to FHD resolution. (Intel HD graphic 4600 installed) To ...

GREAT.....
Thanks for all the hard work and time you have invested.

Cecil

OK thanks

in Thetis c3 if i use Spotting option and activate Rx1 and Rx2 on different bands will it show spots on both receivers ?
Thx


W4Cm
Cecil

Where did you find the file ?
W4CM

Been following the noise measurement discussion on emails. Trying to get the -134dBm level but I think I hit the Cal level start without a ref and changed the setup. I tried a previous saved database and got closer.
How do I start all over and erase the present Thetis 2.6.7 download ?

Can someone explain the setup under calibration tab for the Level Cal ?
Is there a auto setup using start button ?
Does this set the base noise level of the receiver when terminated ?
If not how do you use the Level Cal to check the 7000DLE ?
Thanks
Cecil/W4CM

Having issue with playback/ record feature. Will record but not playback on-air. Using onscreen red dot for record and green arrow for playback. 7000DLE and Thetis 2.6.7 installed. Also when I playback recorded audio the panadapter signal shows a double sideband signal. I key the radio then hit play...

Thanks...

Maybe someone has some other input on the level calibration.

In the Setup.... Calibration tab....Where do I find step by step instructions on the use of the freq. Cal and Level Cal. adjustments ?

Cecil/ W4CM

How can you listen to two receivers at the same time on SDR Console ?
Are there separate volume controls ?

Cecil, W4CM

Anyone using the 4o3a 8 x 1 antenna switch ?

Can anyone share the manufacture of a high power remote antenna switch you are using and how you are interfacing ?
I am using a Anan 7000DLE.
73
Cecil, W4CM