Search found 38 matches

by w4cm
Mon May 11, 2020 7:51 pm
Forum: Thetis
Topic: Display problems
Replies: 8
Views: 670

Re: Display problems

try Thetis v2.7.0 (3/1/20) MWOLGE (a3)
by w4cm
Mon May 11, 2020 5:53 pm
Forum: Thetis
Topic: Display problems
Replies: 8
Views: 670

Re: Display problems

"IF".....you have the box checked in the tab as stated above, make sure you do not have the adjustment of the gain in the slider above or below the viewing area of the spectrum.
What is the number of the gain slider on the slider ?
Is the line a color you can see ?
by w4cm
Sat May 02, 2020 1:38 pm
Forum: SDR Console
Topic: Drive level issues
Replies: 3
Views: 1327

Re: Drive level issues

You need to set gain controls in SDR Console.
Transmit tab, options, audio in, gains, drive slider.
Set for each band.
by w4cm
Thu Feb 13, 2020 7:53 pm
Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
Topic: How do I update firmware on black 7kMKII with no Bootloader Switch on rear panel?
Replies: 11
Views: 2850

Re: How do I update firmware on black 7kMKII with no Bootloader Switch on rear panel?

My manual this is on page 55: Download the HPSDRBootloader installer for Windows HERE. Install the HPSDRBootloader software. Connect the radio to your computer network using an ethernet cable. Place the radio into bootloader mode using the slide switch on the bottom panel. Power the radio ON. Having...
by w4cm
Tue Feb 11, 2020 5:04 pm
Forum: Protocol 2 Firmware (all radios)
Topic: New 7000/8000 Orion MKII Protocol 2 Firmware Topic
Replies: 95
Views: 20007

Re: New 7000/8000 Orion MKII Protocol 2 Firmware Topic

hello, i connect externa ptt on back ptt in jack. I enabled PTT ON ìn setup PTT is ok on lsb, usb, fm, am, digu, digl but no in CW PTT seems disabled it's correct or is a bug??? FW 2.0b - Thetis 2.6.9 - anan 7000 Do you not hear a relay engage ? It will not transmit a carrier with the ptt only
by w4cm
Sun Jan 12, 2020 6:58 pm
Forum: Thetis
Topic: 2.6.9
Replies: 600
Views: 95345

Re: 2.6.9

Just some thoughts on the new option. If the new timer was expanded into a full id'er option the other functions could be : Keys radio and plays audio recorded file or cw id file. Detects radio keyed and wait for un-key to play id Option to sync with clock and id on the tens. This would sync all use...
by w4cm
Fri Dec 13, 2019 8:35 pm
Forum: Thetis
Topic: 2.6.9
Replies: 600
Views: 95345

Re: 2.6.9

PS working great with b3_1 on 7000DLE. My short wish list would be the ability to choose a different color for SPOT stations than being the same color as grid text color. Implement on main display Rx/Xmtr meter for VFO A / Rx 1 and additional functional meter for VFO B/ Rx2 that works with function ...
by w4cm
Thu Dec 12, 2019 3:29 pm
Forum: Thetis
Topic: 2.6.9
Replies: 600
Views: 95345

Re: 2.6.9

UPDATE Hi all, Please try : https://www.dropbox.com/s/150bv7vdxfjsnn7/Thetis_1905_111219_269_b3.zip?dl=0 This version includes a work in progress historic meter data. It can be enabled in setup>display>general in the multimeter group. Colour/alpha is set in appearance> meter. Readings are currently...
by w4cm
Fri Nov 08, 2019 5:23 pm
Forum: PowerSDR mRX
Topic: Record playback feature
Replies: 13
Views: 5166

Re: Record playback feature

An old issue has started again, no audio playback from recorded message in transmit. I see the presence of audio when in playback mode via the up and down levels on the VOX bar but the transmitter shows no output When I try playback on transmit I have tried keying MOX first then play and visa versa...
by w4cm
Fri Nov 08, 2019 1:52 am
Forum: PowerSDR mRX
Topic: Record playback feature
Replies: 13
Views: 5166

Re: Record playback feature

An old issue has started again, no audio playback from recorded message in transmit. I see the presence of audio when in playback mode via the up and down levels on the VOX bar but the transmitter shows no output When I try playback on transmit I have tried keying MOX first then play and visa versa ...
by w4cm
Thu Nov 07, 2019 12:51 pm
Forum: PowerSDR mRX
Topic: Record playback feature
Replies: 13
Views: 5166

Re: Record playback feature

Mark one or more of the following Checkboxes for your prefered method of TX activation: Setup/Audio/VAC1/Checkbox "Allow PTT to override/bypass VAC for Phone" Setup/Audio/VAC1/Checkbox "Allow MOX to override/bypass VAC for Phone" Setup/Audio/VAC1/Checkbox "Allow SPACE to ov...
by w4cm
Sat Nov 02, 2019 8:46 pm
Forum: Thetis
Topic: 2.6.8
Replies: 565
Views: 83887

Re: 2.6.8

UPDATE Hi, small update here : https://www.dropbox.com/s/3zet1lfmv1pel3u/Thetis_1735_021119_e2.zip?dl=0 Richie. (11/1/19) e2 ⋅ fix: mouse wheel over vfo when vfo highlighted in blue(selected) deselects and enables mouse wheel vfo changing ⋅ fix: z-order on vfoahover panel moved ...
by w4cm
Wed Oct 16, 2019 8:59 pm
Forum: PC's & Homebrew Hardware
Topic: GPU Questions
Replies: 14
Views: 7554

Re: GPU Questions

What about the question about the video card ?
Thanks
by w4cm
Wed Oct 16, 2019 4:52 pm
Forum: PC's & Homebrew Hardware
Topic: GPU Questions
Replies: 14
Views: 7554

Re: GPU Questions

Wonder if I could get some help on choosing a 4k monitor/video card ? I am wanting to take advantage of the Thetis and the DirectX engine. My I5 Dell computer per Dell has a HDMI port on the PC is only a 1.2 which is why it can only support up to FHD resolution. (Intel HD graphic 4600 installed) To ...
by w4cm
Fri Oct 04, 2019 3:27 pm
Forum: Thetis
Topic: 2.6.8
Replies: 565
Views: 83887

Re: 2.6.8

GREAT.....
Thanks for all the hard work and time you have invested.

Cecil
by w4cm
Fri Oct 04, 2019 2:52 pm
Forum: Thetis
Topic: 2.6.8
Replies: 565
Views: 83887

Re: 2.6.8

OK thanks
by w4cm
Fri Oct 04, 2019 2:48 pm
Forum: Thetis
Topic: 2.6.8
Replies: 565
Views: 83887

Re: 2.6.8

in Thetis c3 if i use Spotting option and activate Rx1 and Rx2 on different bands will it show spots on both receivers ?
Thx


W4Cm
Cecil
by w4cm
Wed Sep 11, 2019 10:59 am
Forum: Thetis
Topic: 2.6.8
Replies: 565
Views: 83887

Re: 2.6.8

Where did you find the file ?
W4CM
by w4cm
Sun Aug 18, 2019 10:31 pm
Forum: Thetis
Topic: Level Cal adjustment for 7000DLE
Replies: 7
Views: 2504

Re: Level Cal adjustment for 7000DLE

Been following the noise measurement discussion on emails. Trying to get the -134dBm level but I think I hit the Cal level start without a ref and changed the setup. I tried a previous saved database and got closer.
How do I start all over and erase the present Thetis 2.6.7 download ?
by w4cm
Sun Aug 18, 2019 8:11 pm
Forum: Thetis
Topic: Level Cal adjustment for 7000DLE
Replies: 7
Views: 2504

Level Cal adjustment for 7000DLE

Can someone explain the setup under calibration tab for the Level Cal ?
Is there a auto setup using start button ?
Does this set the base noise level of the receiver when terminated ?
If not how do you use the Level Cal to check the 7000DLE ?
Thanks
Cecil/W4CM
by w4cm
Mon May 13, 2019 1:59 pm
Forum: PowerSDR mRX
Topic: Record playback feature
Replies: 13
Views: 5166

Re: Record playback feature

Having issue with playback/ record feature. Will record but not playback on-air. Using onscreen red dot for record and green arrow for playback. 7000DLE and Thetis 2.6.7 installed. Also when I playback recorded audio the panadapter signal shows a double sideband signal. I key the radio then hit play...
by w4cm
Wed Mar 13, 2019 1:50 am
Forum: PowerSDR mRX
Topic: Calibration Tab 7000DLE
Replies: 4
Views: 2013

Re: Calibration Tab 7000DLE

Thanks...

Maybe someone has some other input on the level calibration.
by w4cm
Tue Mar 12, 2019 11:40 pm
Forum: PowerSDR mRX
Topic: Calibration Tab 7000DLE
Replies: 4
Views: 2013

Calibration Tab 7000DLE

In the Setup.... Calibration tab....Where do I find step by step instructions on the use of the freq. Cal and Level Cal. adjustments ?

Cecil/ W4CM
by w4cm
Tue Feb 19, 2019 2:44 am
Forum: SDR Console
Topic: SDR Console 10-23-2017 64-bit Release with ANAN-200D
Replies: 6
Views: 7791

Re: SDR Console 10-23-2017 64-bit Release with ANAN-200D

How can you listen to two receivers at the same time on SDR Console ?
Are there separate volume controls ?

Cecil, W4CM
by w4cm
Tue Feb 19, 2019 2:41 am
Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
Topic: Remote Antenna Switch
Replies: 4
Views: 2456

Re: Remote Antenna Switch

Anyone using the 4o3a 8 x 1 antenna switch ?
by w4cm
Sat Feb 16, 2019 9:47 pm
Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
Topic: Remote Antenna Switch
Replies: 4
Views: 2456

Remote Antenna Switch

Can anyone share the manufacture of a high power remote antenna switch you are using and how you are interfacing ?
I am using a Anan 7000DLE.
73
Cecil, W4CM
by w4cm
Fri Feb 08, 2019 12:45 pm
Forum: SDR Console
Topic: SDR Console 10-23-2017 64-bit Release with ANAN-200D
Replies: 6
Views: 7791

Multiple receivers audio

How can you listen to two receivers at the same time ?
Are there separate volume controls ?

Cecil, W4CM
by w4cm
Wed Jan 30, 2019 3:27 pm
Forum: SDR Console
Topic: New Protocol
Replies: 6
Views: 6190

Re: New Protocol

Rob thanks. I did find the update and it does run MUCH smoother.
by w4cm
Wed Jan 30, 2019 3:06 am
Forum: SDR Console
Topic: New Protocol
Replies: 6
Views: 6190

Re: New Protocol

I have a Anan 7000. I am using v3.0.3, Sept. 11,2018 release. Is this the one I should use ?
Having crash issues. Also can not figure out how to use VOX. Can not get the mike to work on line in. Drive adjustment goes over 100 watts.
Thanks,

Cecil, W4CM

Go to advanced search