Just curious what version of windows are you running and do you see glitching on the DC spike at 0KHz?
If it does, It sounds like a very similar problem I had when my PC automaticity upgraded to Win 10 Ver2004
I had to roll back to Win 10 Ver1909 to fix it
Regards
Bill
Search found 21 matches
- Mon Nov 23, 2020 8:26 pm
- Forum: Thetis
- Topic: Glitches in TUNE signal viewed with Duplex on
- Replies: 25
- Views: 13143
- Thu Oct 22, 2020 7:57 pm
- Forum: Thetis
- Topic: No Mic #Thetis
- Replies: 5
- Views: 3043
Re: No Mic #Thetis
How do you key up the radio, Is the CM500 plugged into the front of the PC or the mic and headphone sockets on the radio? If you use the mic and headphones on the front of the radio and you key up from the radio, check the Allow PTT to override/bypass VAC for phone box. I had the same problem when p...
- Sat Oct 10, 2020 5:45 am
- Forum: Thetis
- Topic: Thetis 2.8.11 Released!
- Replies: 232
- Views: 237921
Re: Thetis 2.8.7 Released!
Happy to report all working fine on my 100D Grey face unit.
The easy choice would be to quietly drop support for the older hardware..... But not with this team!
Well done all involved in this project, It just shows when you have a dedicated team of committed
people what can be achieved.
Best 73
Bill
The easy choice would be to quietly drop support for the older hardware..... But not with this team!
Well done all involved in this project, It just shows when you have a dedicated team of committed
people what can be achieved.
Best 73
Bill
- Thu Oct 08, 2020 1:18 pm
- Forum: Sales, Delivery, Warranty & Repair Discussions
- Topic: Purchase direct
- Replies: 8
- Views: 9487
Re: Purchase direct
Thanks Guys.
Just for info Apache labs responded
"Amateur Radio equipment is duty free import into the UK, you will have to pay VAT on import"
Just for info Apache labs responded
"Amateur Radio equipment is duty free import into the UK, you will have to pay VAT on import"
- Tue Sep 29, 2020 7:28 am
- Forum: Sales, Delivery, Warranty & Repair Discussions
- Topic: Purchase direct
- Replies: 8
- Views: 9487
Purchase direct
Anyone from the UK bought direct from the factory and
did you get charged import duty & VAT on top of the purchase price?
About to order the ANAN-7000DLE MKII
73 Bill
did you get charged import duty & VAT on top of the purchase price?
About to order the ANAN-7000DLE MKII
73 Bill
- Sat Sep 26, 2020 8:04 am
- Forum: PowerSDR mRX
- Topic: Windows10 2004 Update busted my radio
- Replies: 13
- Views: 8319
Windows10 2004 Update busted my radio
I thought it was just me until I saw this thread https://apache-labs.com/community/viewtopic.php?f=8&p=12108#p12108 My PC Is a i7-4790K with 16GB Ram and a 240SSD After my PC installed the Windows 10 2004 Update it was impossible to use my Anan 100D without audio stream jitters. looking at the D...
- Sat Sep 26, 2020 7:28 am
- Forum: SDR Console
- Topic: Windows10 2004 Update broke SDR Console TX audio
- Replies: 1
- Views: 10011
Re: Windows10 2004 Update broke SDR Console TX audio
Exact same thing here. but just as bad on receive I am using a different client. PowerSDR OpenHPSDR mRX PS V3.4.9 Anan 100D V6 Firmware If I tune to 9KHz I can "see" the jitter on the DC Spike at 0KHz on Receive Tried a fresh install of 2004 and the same thing The only way I could fix it w...
- Sat Aug 01, 2020 3:51 am
- Forum: Microphones, Speakers & Audio Hardware
- Topic: 100D with Icom SM20
- Replies: 11
- Views: 6863
Re: 100D with Icom SM20
Hi Scott and Laurence. I heard back from the Ebay seller and although he says the patch lead works 100% with all Icom Microphones, he cant guarantee it will work correctly. "Hi. I do have schematic and in my opinion it will work however since I've never tried with 2-3Vdc I can NOT guarantee ful...
- Fri Jul 31, 2020 2:07 pm
- Forum: Microphones, Speakers & Audio Hardware
- Topic: 100D with Icom SM20
- Replies: 11
- Views: 6863
Re: 100D with Icom SM20
No joy with the resistor...no audio whatsoever.
Have messaged the Ebay seller for more info on the patch lead.
Thanks
Bill
Have messaged the Ebay seller for more info on the patch lead.
Thanks
Bill
- Fri Jul 31, 2020 1:42 pm
- Forum: Microphones, Speakers & Audio Hardware
- Topic: 100D with Icom SM20
- Replies: 11
- Views: 6863
Re: 100D with Icom SM20
Thanks for the suggestion Laurence.
I will try a 47k resistor in series with Pin 2 and tip and report back
Bill
I will try a 47k resistor in series with Pin 2 and tip and report back
Bill
- Fri Jul 31, 2020 12:59 pm
- Forum: Microphones, Speakers & Audio Hardware
- Topic: 100D with Icom SM20
- Replies: 11
- Views: 6863
Re: 100D with Icom SM20
I appreciate the help guys, the microphone is working fine with my Icom 775, always had good reports. Measured the voltage from the Anan mic socket and its 2.33 volts without anything connected, Is this enough to power the SM20? There is a seller on Ebay with a made up lead https://tinyurl.com/yxolp...
- Fri Jul 31, 2020 5:48 am
- Forum: Microphones, Speakers & Audio Hardware
- Topic: 100D with Icom SM20
- Replies: 11
- Views: 6863
Re: 100D with Icom SM20
Good question Scott
Have tries several combinations and this is the last attempt
Got lots of noise and slight audio with this
TIP to pin 2 and connected to 47uf cap, other end of cap connected to pin 1
RING N/C
SLEEVE to pin 7
Thanks
Bill
![Wink ;)](./images/smilies/icon_e_wink.gif)
Have tries several combinations and this is the last attempt
Got lots of noise and slight audio with this
TIP to pin 2 and connected to 47uf cap, other end of cap connected to pin 1
RING N/C
SLEEVE to pin 7
Thanks
Bill
- Thu Jul 30, 2020 1:04 pm
- Forum: Microphones, Speakers & Audio Hardware
- Topic: 100D with Icom SM20
- Replies: 11
- Views: 6863
100D with Icom SM20
Hello, I need some help trying to get this combination working please. My radio is set up to supply bias voltage to the existing mic I use. I have made a 3.5 mm jack to 8 pin round male patch lead up for the SM20 but when I connect It no audio output from the mic . My Anan front mic socket is config...
- Wed May 30, 2018 8:48 am
- Forum: PowerSDR mRX
- Topic: Microphone input
- Replies: 3
- Views: 4218
Re: Microphone input
Hi Tony,
Fantastic! Its working, It was the 3rd option...Allow Mox
Was getting RF feedback through powered speakers when using primary but don't when set to VAC as audio routed through HDMI on my monitor
Thanks a million
Bill
Fantastic! Its working, It was the 3rd option...Allow Mox
Was getting RF feedback through powered speakers when using primary but don't when set to VAC as audio routed through HDMI on my monitor
Thanks a million
Bill
- Wed May 30, 2018 8:22 am
- Forum: PowerSDR mRX
- Topic: Microphone input
- Replies: 3
- Views: 4218
Microphone input
Hi, I am using the Anan 10 with OpenHPSDR 3.4.9 Is it possible to use the Microphone input on the front of the Anan 10 when I have the VAC1 connection enabled in the software. I notice the Headphone socket is still active in VAC mode but the Mic input is disabled. Could I have missed a setting in th...
- Fri Apr 06, 2018 9:02 am
- Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
- Topic: Identifying Model 10 Or 10E
- Replies: 6
- Views: 6215
Re: Identifying Model 10 Or 10E
Thanks Scott,
That's great news for me.
Have a good weekend
73
Bill
That's great news for me.
Have a good weekend
73
Bill
- Thu Apr 05, 2018 3:20 pm
- Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
- Topic: Identifying Model 10 Or 10E
- Replies: 6
- Views: 6215
Re: Identifying Model 10 Or 10E
Hi Scott, I have found this in the link
https://github.com/TAPR/OpenHPSDR-Firmw ... 20versions
Hermes_V3.1. Is this relevant?
Sorry for the newbie questions....Please be gentle with me![Laughing :lol:](./images/smilies/icon_lol.gif)
https://github.com/TAPR/OpenHPSDR-Firmw ... 20versions
Hermes_V3.1. Is this relevant?
Sorry for the newbie questions....Please be gentle with me
![Laughing :lol:](./images/smilies/icon_lol.gif)
- Thu Apr 05, 2018 2:39 pm
- Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
- Topic: Identifying Model 10 Or 10E
- Replies: 6
- Views: 6215
Re: Identifying Model 10 Or 10E
My Firmware is reported to be ANAN 3.1 in PowerSDR v3.4.9 No complete firmware history found in the link you kindly posted I am guessing I have an ANAN 10 as the latest firmware in the 10 & 100 thread is is v3.2b Whereas the firmware in the the 10E & 100B thread is v1.5 Best regards http://i...
- Thu Apr 05, 2018 2:01 pm
- Forum: All Other Clients
- Topic: CuSDR64 v0.3.3.0 (Feb 2017 Release)
- Replies: 22
- Views: 44177
Re: CuSDR64 v0.3.3.0 (Feb 2017 Release)
Hi Rob,
Thanks for the quick reply, seems a shame as the program looks great.
Best wishes
Bill
G6SVN
Thanks for the quick reply, seems a shame as the program looks great.
Best wishes
Bill
G6SVN
- Thu Apr 05, 2018 9:40 am
- Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
- Topic: Identifying Model 10 Or 10E
- Replies: 6
- Views: 6215
Identifying Model 10 Or 10E
Hello, I have just purchased an ANAN 10 or it might be a 10E, I cant tell from the outside and I am reluctant to remove the case to check inside. Is there a way to interrogate the unit to determine what the model number is? I have installed PowerSDR V 3.4.9 and choosing the ANAN 10 in setup allows l...
- Thu Apr 05, 2018 9:31 am
- Forum: All Other Clients
- Topic: CuSDR64 v0.3.3.0 (Feb 2017 Release)
- Replies: 22
- Views: 44177
Re: CuSDR64 v0.3.3.0 (Feb 2017 Release)
Hello,
I am looking for a link to download the current version of CuSDR 32 or 64 bit
Seems all the links are all 404 dead links. I have googled and no joy
Can anyone point me to a working link?
All the best 73
Bill
G6SVN
I am looking for a link to download the current version of CuSDR 32 or 64 bit
Seems all the links are all 404 dead links. I have googled and no joy
Can anyone point me to a working link?
All the best 73
Bill
G6SVN