Search found 21 matches

by laserbill
Mon Nov 23, 2020 8:26 pm
Forum: Thetis
Topic: Glitches in TUNE signal viewed with Duplex on
Replies: 25
Views: 4907

Re: Glitches in TUNE signal viewed with Duplex on

Just curious what version of windows are you running and do you see glitching on the DC spike at 0KHz?
If it does, It sounds like a very similar problem I had when my PC automaticity upgraded to Win 10 Ver2004
I had to roll back to Win 10 Ver1909 to fix it

Regards
Bill
by laserbill
Thu Oct 22, 2020 7:57 pm
Forum: Thetis
Topic: No Mic #Thetis
Replies: 5
Views: 552

Re: No Mic #Thetis

How do you key up the radio, Is the CM500 plugged into the front of the PC or the mic and headphone sockets on the radio? If you use the mic and headphones on the front of the radio and you key up from the radio, check the Allow PTT to override/bypass VAC for phone box. I had the same problem when p...
by laserbill
Sat Oct 10, 2020 5:45 am
Forum: Thetis
Topic: Thetis 2.8.11 Released!
Replies: 221
Views: 21651

Re: Thetis 2.8.7 Released!

Happy to report all working fine on my 100D Grey face unit.
The easy choice would be to quietly drop support for the older hardware..... But not with this team!
Well done all involved in this project, It just shows when you have a dedicated team of committed
people what can be achieved.
Best 73
Bill
by laserbill
Thu Oct 08, 2020 1:18 pm
Forum: Forum Problems, Help & Suggestions
Topic: Purchase direct
Replies: 3
Views: 692

Re: Purchase direct

Thanks Guys.
Just for info Apache labs responded
"Amateur Radio equipment is duty free import into the UK, you will have to pay VAT on import"
by laserbill
Tue Sep 29, 2020 7:28 am
Forum: Forum Problems, Help & Suggestions
Topic: Purchase direct
Replies: 3
Views: 692

Purchase direct

Anyone from the UK bought direct from the factory and
did you get charged import duty & VAT on top of the purchase price?
About to order the ANAN-7000DLE MKII

73 Bill
by laserbill
Sat Sep 26, 2020 8:04 am
Forum: PowerSDR mRX
Topic: Windows10 2004 Update busted my radio
Replies: 14
Views: 1382

Windows10 2004 Update busted my radio

I thought it was just me until I saw this thread https://apache-labs.com/community/viewtopic.php?f=8&p=12108#p12108 My PC Is a i7-4790K with 16GB Ram and a 240SSD After my PC installed the Windows 10 2004 Update it was impossible to use my Anan 100D without audio stream jitters. looking at the D...
by laserbill
Sat Sep 26, 2020 7:28 am
Forum: SDR Console
Topic: Windows10 2004 Update broke SDR Console TX audio
Replies: 1
Views: 1534

Re: Windows10 2004 Update broke SDR Console TX audio

Exact same thing here. but just as bad on receive I am using a different client. PowerSDR OpenHPSDR mRX PS V3.4.9 Anan 100D V6 Firmware If I tune to 9KHz I can "see" the jitter on the DC Spike at 0KHz on Receive Tried a fresh install of 2004 and the same thing The only way I could fix it w...
by laserbill
Sat Aug 01, 2020 3:51 am
Forum: Microphones, Speakers & Audio Hardware
Topic: 100D with Icom SM20
Replies: 11
Views: 1475

Re: 100D with Icom SM20

Hi Scott and Laurence. I heard back from the Ebay seller and although he says the patch lead works 100% with all Icom Microphones, he cant guarantee it will work correctly. "Hi. I do have schematic and in my opinion it will work however since I've never tried with 2-3Vdc I can NOT guarantee ful...
by laserbill
Fri Jul 31, 2020 2:07 pm
Forum: Microphones, Speakers & Audio Hardware
Topic: 100D with Icom SM20
Replies: 11
Views: 1475

Re: 100D with Icom SM20

No joy with the resistor...no audio whatsoever.
Have messaged the Ebay seller for more info on the patch lead.
Thanks
Bill
by laserbill
Fri Jul 31, 2020 1:42 pm
Forum: Microphones, Speakers & Audio Hardware
Topic: 100D with Icom SM20
Replies: 11
Views: 1475

Re: 100D with Icom SM20

Thanks for the suggestion Laurence.
I will try a 47k resistor in series with Pin 2 and tip and report back
Bill
by laserbill
Fri Jul 31, 2020 12:59 pm
Forum: Microphones, Speakers & Audio Hardware
Topic: 100D with Icom SM20
Replies: 11
Views: 1475

Re: 100D with Icom SM20

I appreciate the help guys, the microphone is working fine with my Icom 775, always had good reports. Measured the voltage from the Anan mic socket and its 2.33 volts without anything connected, Is this enough to power the SM20? There is a seller on Ebay with a made up lead https://tinyurl.com/yxolp...
by laserbill
Fri Jul 31, 2020 5:48 am
Forum: Microphones, Speakers & Audio Hardware
Topic: 100D with Icom SM20
Replies: 11
Views: 1475

Re: 100D with Icom SM20

Good question Scott ;)
Have tries several combinations and this is the last attempt
Got lots of noise and slight audio with this

TIP to pin 2 and connected to 47uf cap, other end of cap connected to pin 1
RING N/C
SLEEVE to pin 7

Thanks
Bill
by laserbill
Thu Jul 30, 2020 1:04 pm
Forum: Microphones, Speakers & Audio Hardware
Topic: 100D with Icom SM20
Replies: 11
Views: 1475

100D with Icom SM20

Hello, I need some help trying to get this combination working please. My radio is set up to supply bias voltage to the existing mic I use. I have made a 3.5 mm jack to 8 pin round male patch lead up for the SM20 but when I connect It no audio output from the mic . My Anan front mic socket is config...
by laserbill
Wed May 30, 2018 8:48 am
Forum: PowerSDR mRX
Topic: Microphone input
Replies: 3
Views: 1970

Re: Microphone input

Hi Tony,
Fantastic! Its working, It was the 3rd option...Allow Mox
Was getting RF feedback through powered speakers when using primary but don't when set to VAC as audio routed through HDMI on my monitor
Thanks a million
Bill
by laserbill
Wed May 30, 2018 8:22 am
Forum: PowerSDR mRX
Topic: Microphone input
Replies: 3
Views: 1970

Microphone input

Hi, I am using the Anan 10 with OpenHPSDR 3.4.9 Is it possible to use the Microphone input on the front of the Anan 10 when I have the VAC1 connection enabled in the software. I notice the Headphone socket is still active in VAC mode but the Mic input is disabled. Could I have missed a setting in th...
by laserbill
Fri Apr 06, 2018 9:02 am
Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
Topic: Identifying Model 10 Or 10E
Replies: 6
Views: 3136

Re: Identifying Model 10 Or 10E

Thanks Scott,
That's great news for me.
Have a good weekend
73
Bill
by laserbill
Thu Apr 05, 2018 3:20 pm
Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
Topic: Identifying Model 10 Or 10E
Replies: 6
Views: 3136

Re: Identifying Model 10 Or 10E

Hi Scott, I have found this in the link
https://github.com/TAPR/OpenHPSDR-Firmw ... 20versions
Hermes_V3.1. Is this relevant?
Sorry for the newbie questions....Please be gentle with me :lol:
by laserbill
Thu Apr 05, 2018 2:39 pm
Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
Topic: Identifying Model 10 Or 10E
Replies: 6
Views: 3136

Re: Identifying Model 10 Or 10E

My Firmware is reported to be ANAN 3.1 in PowerSDR v3.4.9 No complete firmware history found in the link you kindly posted I am guessing I have an ANAN 10 as the latest firmware in the 10 & 100 thread is is v3.2b Whereas the firmware in the the 10E & 100B thread is v1.5 Best regards http://i...
by laserbill
Thu Apr 05, 2018 2:01 pm
Forum: All Other Clients
Topic: CuSDR64 v0.3.3.0 (Feb 2017 Release)
Replies: 22
Views: 19893

Re: CuSDR64 v0.3.3.0 (Feb 2017 Release)

Hi Rob,
Thanks for the quick reply, seems a shame as the program looks great.
Best wishes
Bill
G6SVN
by laserbill
Thu Apr 05, 2018 9:40 am
Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
Topic: Identifying Model 10 Or 10E
Replies: 6
Views: 3136

Identifying Model 10 Or 10E

Hello, I have just purchased an ANAN 10 or it might be a 10E, I cant tell from the outside and I am reluctant to remove the case to check inside. Is there a way to interrogate the unit to determine what the model number is? I have installed PowerSDR V 3.4.9 and choosing the ANAN 10 in setup allows l...
by laserbill
Thu Apr 05, 2018 9:31 am
Forum: All Other Clients
Topic: CuSDR64 v0.3.3.0 (Feb 2017 Release)
Replies: 22
Views: 19893

Re: CuSDR64 v0.3.3.0 (Feb 2017 Release)

Hello,
I am looking for a link to download the current version of CuSDR 32 or 64 bit
Seems all the links are all 404 dead links. I have googled and no joy
Can anyone point me to a working link?
All the best 73
Bill
G6SVN

Go to advanced search