Search found 42 matches

by NN3RP
Mon Jun 15, 2020 3:03 am
Forum: Transverters
Topic: What transverter to get
Replies: 1
Views: 808

What transverter to get

I found this website for a company based in Florida: http://q5signal.com/index.php?route=common/home I would like to experiment with Anan 7000dle (new box with embedded PC) using the 2m / 70cm for satellite rx/tx. I wonder what others are using / what port(s), etc.. I heard a fellow today using tran...
by NN3RP
Mon May 18, 2020 1:16 pm
Forum: Thetis
Topic: Thetis and CW Skimmer
Replies: 40
Views: 4841

Re: Thetis and CW Skimmer

Helmut, you might want to open a support case:

https://vac.muzychenko.net/en/support.htm

I am sorry but I cannot do run a test on my working system. I could try on another system that has the exact same software with the newest version of VAC. I will post when I am done.
by NN3RP
Sun May 17, 2020 6:53 pm
Forum: Thetis
Topic: Thetis and CW Skimmer
Replies: 40
Views: 4841

Re: Thetis and CW Skimmer

Helmut, we have practically the same setup My Anan 7000dle MKII is the newest version with the PC incorporated. CW skimmer is the same version. Thetis and Firmware is the same. Same VSPE (paid). OmniRig is a bit different version as I have 1.16 but I doubt this will make a difference. My VAC is vers...
by NN3RP
Sat May 16, 2020 10:03 pm
Forum: Thetis
Topic: Thetis and CW Skimmer
Replies: 40
Views: 4841

Re: Thetis and CW Skimmer

Hi Helmut 40M is busy for sure today:

Here is a pic:

cwskimmer_Thetis.gif
cwskimmer_Thetis.gif (1.02 MiB) Viewed 1480 times
by NN3RP
Sat May 16, 2020 7:45 pm
Forum: Thetis
Topic: Thetis and CW Skimmer
Replies: 40
Views: 4841

Re: Thetis and CW Skimmer

I probably was using that older version at the time of the writing....now is v2.7.0 (3/1/20) MW0LGE (a3)

thetis version.gif
thetis version.gif (6.3 KiB) Viewed 1499 times
by NN3RP
Sat May 16, 2020 5:45 pm
Forum: Thetis
Topic: Thetis and CW Skimmer
Replies: 40
Views: 4841

Re: Thetis and CW Skimmer

BTW, Helmut. Why are you mentioning / using SDR Console? In my setup configuration I am only using Thetis!!! Try not using SDR Console altogether. Hello Om´s, I think I found the reason, why there are so much artifacts - on Simon´s SDR-Console Site: The spectrum and Waterfall in SDR Console use Dire...
by NN3RP
Sat May 16, 2020 5:42 pm
Forum: Thetis
Topic: Thetis and CW Skimmer
Replies: 40
Views: 4841

Re: Thetis and CW Skimmer

Maybe modifying the Registry?
by NN3RP
Sat May 16, 2020 12:00 am
Forum: Protocol 2 Firmware (all radios)
Topic: New 7000/8000 Orion MKII Protocol 2 Firmware Topic
Replies: 95
Views: 21865

Re: New 7000/8000 Orion MKII Protocol 2 Firmware Topic

If it helps, WSJT-X needs / demands your PC to have time synchronized with time server, i.e., using Dimension 4 software or other. Otherwise you will not be heard. I've been there done that.



Rafael / NN3RP
by NN3RP
Thu May 14, 2020 7:10 pm
Forum: Thetis
Topic: Thetis and CW Skimmer
Replies: 40
Views: 4841

Re: Thetis and CW Skimmer

...try using only one Rx instead or RX2 and see if there is any difference.
by NN3RP
Thu May 14, 2020 5:09 pm
Forum: Thetis
Topic: Thetis and CW Skimmer
Replies: 40
Views: 4841

Re: Thetis and CW Skimmer

Helmut, good day to you and yours. Looks like something has too much audio gain. I reopened my file and followed the pictures to redo each of the steps one by one. I do not see that blurriness on the decoding window after I launched Thetis / CW skimmer. Unable to replicate. My version of the VAC is ...
by NN3RP
Wed Jan 15, 2020 9:03 pm
Forum: SDR Console
Topic: Version 3.0.17 on a Anan 7000DLE S/N-13
Replies: 2
Views: 4396

Re: Version 3.0.17 on a Anan 7000DLE S/N-13

John, did you ever finish going through the SDR settings? I, like yours, have the default settings but don't know exactly what to change them to. What firewall setting did you allow?
by NN3RP
Fri Jan 03, 2020 3:10 pm
Forum: Thetis
Topic: Thetis and CW Skimmer
Replies: 40
Views: 4841

Re: Thetis and CW Skimmer

As promise, here is a Word document with the main pics and notations:

Thetis Setup with Skimmer.docx
(462.8 KiB) Downloaded 96 times


or...here is a OneDrive link showing all of the snapshots taken in the production.

https://1drv.ms/u/s!Al_5NCnHQyKatBsSWk_zb1StQhRR?e=OryL47
by NN3RP
Fri Jan 03, 2020 1:45 pm
Forum: Thetis
Topic: Thetis and CW Skimmer
Replies: 40
Views: 4841

Re: Thetis and CW Skimmer

Hi, Gary and good morning all! The system does not allow but only three (3) pics in one shot? So I took a snapshot of all of the snapshots and the penny and cable is part of the desktop...hihi. I will try and see if I can post pics in several posts....or link to a Word document that I've created...s...
by NN3RP
Thu Jan 02, 2020 10:36 pm
Forum: Thetis
Topic: Thetis and CW Skimmer
Replies: 40
Views: 4841

Re: Thetis and CW Skimmer

I have figured out why OmnyRig's CAT cannot connect to CWSkimmer so that it displays Thetis frequency read out. All it takes is the creation of a Connector and a Splitter. Additional Pairs can be added if needed for TX, i.e., PTT or CW. I used the VSPE eulation software. In the sample picture attach...
by NN3RP
Thu Jan 02, 2020 1:57 pm
Forum: Thetis
Topic: Thetis and CW Skimmer
Replies: 40
Views: 4841

Re: Thetis and CW Skimmer

To all Happy New Year!

George, can you possibly post the settings for CAT in CWS (OmniRig) / Thetis?

I am using VSPE for port creation and I can manage to interface Thetis to other software, i.e., N1MM, WSJTX, etc. but not using OmniRig.
by NN3RP
Tue Dec 31, 2019 11:33 am
Forum: Thetis
Topic: Thetis and CW Skimmer
Replies: 40
Views: 4841

Re: Thetis and CW Skimmer

My CWS / Thetis works without the offending line / bar across as mentioned here. The only issue that I am having is displaying the frequency (CAT settings) on CWS, however. I have tried Kenwoood, TS2000, PowerSDR with COM Pairs to no avail. Once I can have it display, I will confirm frequency accura...
by NN3RP
Mon Dec 09, 2019 10:05 pm
Forum: PC's & Homebrew Hardware
Topic: 7000DLE MKII - Shutdown
Replies: 2
Views: 1784

Re: 7000DLE MKII - Shutdown

Thanks.
by NN3RP
Mon Dec 09, 2019 7:49 pm
Forum: PC's & Homebrew Hardware
Topic: 7000DLE MKII - Shutdown
Replies: 2
Views: 1784

7000DLE MKII - Shutdown

I would like to know if there is a way to completely shutdown 7000DLE MKII (i7). I mean, I can shutdown Windows 10 via the normal means but the 7000 still remains on. I have to manually push the big red square button to turn it off. The other night I forgot to do it and the hardware was on all night...
by NN3RP
Thu Nov 21, 2019 7:59 pm
Forum: Protocol 2 Firmware (all radios)
Topic: New 7000/8000 Orion MKII Protocol 2 Firmware Topic
Replies: 95
Views: 21865

Re: New 7000/8000 Orion MKII Protocol 2 Firmware Topic

Thanks. I have read about the issue when the jumper is not there. As soon as I received mine yesterday, I opened it to confirm the chip # / the jumper was in place.

I will proceed with cautiously with bootloader method.
by NN3RP
Thu Nov 21, 2019 6:54 pm
Forum: Protocol 2 Firmware (all radios)
Topic: New 7000/8000 Orion MKII Protocol 2 Firmware Topic
Replies: 95
Views: 21865

Re: New 7000/8000 Orion MKII Protocol 2 Firmware Topic

So I am the 2nd owner of a 7000dle MKII with PC embedded I7, 8Gb RAM, Windows 10 Home, purchased in October 2019. I do not think that it has the current firmware. I have only play with the PSDR that comes with it last night. Upgraded Windows to Pro in a flash. I would like to use Thetis as I have be...
by NN3RP
Thu Nov 21, 2019 4:02 pm
Forum: SDR Console
Topic: anan 7000dlemark2 I7 running powersdrmrx
Replies: 3
Views: 3415

Re: anan 7000dlemark2 I7 running powersdrmrx

Steven, good day to you and congrats in owning this new jewel. This post is a few days old and see no one reply to you. I've also just gotten me the same rig yesterday, wow! I need to update the firmware though and perhaps use Thetis instead of PSDRMRX. You don't need anything but the right SDRConso...
by NN3RP
Tue Mar 19, 2019 3:50 pm
Forum: Digital Mode, Rig Control & Logging Software
Topic: N1MM SO2V and 7000dle
Replies: 4
Views: 3333

Re: N1MM SO2V and 7000dle

Andy, my issue was fixed, as I wrote, by adding a RX antenna to the RX2 port on the back of the Anan 7000dle. I was having the issue you described with the program Thetis / N1MM being placed in SPLIT mode. After adding the above RX antenna to RX2 port on 7000dle, I was able to TX on VFO-B. Both RX2 ...
by NN3RP
Sun Feb 24, 2019 2:16 am
Forum: Digital Mode, Rig Control & Logging Software
Topic: N1MM SO2V and 7000dle
Replies: 4
Views: 3333

Re: N1MM SO2V and 7000dle

Have you ever replied to yourself? I hope this information is of some value to anyone. I believe that I nailed it down. I spent all of my afternoon today Saturday scratching, on every attempt my head, :D and came up with a solution. I added a RX antenna that I use for skimming to the RX2 port on the...
by NN3RP
Sat Feb 23, 2019 3:48 am
Forum: Digital Mode, Rig Control & Logging Software
Topic: N1MM SO2V and 7000dle
Replies: 4
Views: 3333

N1MM SO2V and 7000dle

I am working on setting up N1MM for SO2V but the program and 7000 are placed into Split when a station is selected in VFO-B or use Ctrl RightArrow. I watched a youtube video by N1EU dating back to Feb. 2015 about SO2V / search and pounce: https://www.youtube.com/watch?v=GAicWV_cT0g He was using ANAN...
by NN3RP
Mon Jan 21, 2019 12:40 am
Forum: Digital Mode, Rig Control & Logging Software
Topic: N1MM+, Voicing wav files, 7000dle Mic
Replies: 16
Views: 7103

Re: N1MM+, Voicing wav files, 7000dle Mic

I wanted to report that I play the NAQP SSB contest this weekend using the Anan 7000dle with focus on N1MM+. I have *.wav files prepared via Audacity for the main exchanges; CQ, Name, State. These files I have always used with other rigs. They played superbly well using VAC1, I think, as I did not h...
by NN3RP
Wed Jan 16, 2019 1:43 am
Forum: Protocol 2 Firmware (all radios)
Topic: Orion (200D) and Orion MKII (7000 & 8000) users: P2 v1.4 released
Replies: 28
Views: 7731

Re: Orion (200D) and Orion MKII (7000 & 8000) users: P2 v1.4 released

I posted this reply on the Yahoo group in relation to finding the installation software for Thetis but thought placing it here as well to share: "Next time around, I will remember to check the release(s). I was able to download Thetis v2.62 and P2 firmware 1.4 (needs to be renamed prior to upgr...
by NN3RP
Mon Jan 07, 2019 1:13 am
Forum: Protocol 2 Firmware (all radios)
Topic: Orion (200D) and Orion MKII (7000 & 8000) users: P2 v1.4 released
Replies: 28
Views: 7731

Re: Orion (200D) and Orion MKII (7000 & 8000) users: P2 v1.4 released

Not that fast, Scott! I was able to make FT8 and RTTY to work with Thetis. Somehow playing with the VAC settings back and forth on each FT8 and RTTY made it to TX / RX as it was before with P1. The settings are kind of backwards, though but as long they're working I am fine. Next for me is to play w...
by NN3RP
Sat Jan 05, 2019 4:07 pm
Forum: Protocol 2 Firmware (all radios)
Topic: Orion (200D) and Orion MKII (7000 & 8000) users: P2 v1.4 released
Replies: 28
Views: 7731

Re: Orion (200D) and Orion MKII (7000 & 8000) users: P2 v1.4 released

Good news! Last night I did a clean uninstall / reinstall of Thetis. The FFT process repeated as in the first time, upon launching Thetis. Thetis opened and all is back to the way it was. I can only TX properly on CW, SSB. Digital mode only keys the radio / software (FT8, RTTY) but no signal Watts o...
by NN3RP
Sat Jan 05, 2019 12:54 am
Forum: Protocol 2 Firmware (all radios)
Topic: Orion (200D) and Orion MKII (7000 & 8000) users: P2 v1.4 released
Replies: 28
Views: 7731

Re: Orion (200D) and Orion MKII (7000 & 8000) users: P2 v1.4 released

I've just uninstalled Thetis and cleaned up the Windows 10 registry...Restarted PC....reloaded Thethis. Some history: Last, night upon launching the Thetis, a DOS Windows poped up indicating a FFT process: Planning COMPLEX BACKWARD FFT size 64 through 262145 Planning COMPLEX FORWARD FFT size 64 thro...
by NN3RP
Fri Jan 04, 2019 11:20 pm
Forum: Protocol 2 Firmware (all radios)
Topic: Orion (200D) and Orion MKII (7000 & 8000) users: P2 v1.4 released
Replies: 28
Views: 7731

Re: Orion (200D) and Orion MKII (7000 & 8000) users: P2 v1.4 released

Unfortunately, none of the suggestions makes the Thetis to work. I mean there isn't any signal or audio present. I know the 7000 is present since the ethernet blinks on both ends. 1.4 is the FW I reloaded using bootloader (had to rename the file). I will unload / reload the Thetis software next Rafa...

Go to advanced search