Search found 45 matches
- Sun Mar 13, 2022 7:25 pm
- Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
- Topic: GPSDO Tutorial?
- Replies: 136
- Views: 205599
Re: GPSDO Tutorial?
Yes Scott I agree - let me just provide some more feedback to this topic as I spent some more time and started measurements. First of all we compared results on 2 different ANANs (one 7000DLE and one 7000DLE MKII black face) Both jump back to 10 MHz reference if the external reference jumps too much...
- Sat Mar 12, 2022 4:42 pm
- Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
- Topic: GPSDO Tutorial?
- Replies: 136
- Views: 205599
Re: GPSDO Tutorial?
Hi dear Scott, dear Tony, The problem got fixed at the end. I opened the ANAN-7000 today and checked the cables. Scott you were right - they mixed up the cables of transverter and RF Ref In.....unbelievable! The box was never open - done by the factory. I added the 2 jumpers and corrected the cable...
- Fri Mar 11, 2022 9:28 pm
- Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
- Topic: GPSDO Tutorial?
- Replies: 136
- Views: 205599
Re: GPSDO Tutorial?
Hi Scott, Many thanks for your quick reply - much appreciated! So I connected the Bognar device to the 10 MHz input (SMA-connector on rear)......but I tried the other as well (just in case they mixed it up). The Bognar device is the mini - just one port. It can be switched between 8 mA and 24 mA in ...
- Fri Mar 11, 2022 4:46 pm
- Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
- Topic: GPSDO Tutorial?
- Replies: 136
- Views: 205599
Re: GPSDO Tutorial?
Run it at the maximum setting. This will get you a 3.3v square wave output signal. I bought the Chinese unit, which was riskier, of course, because I wanted access to the uBlox GPS chip serial data output and a 1pps output, neither of which the Bodnar unit has. I did not need or want an adjustable ...
- Tue Sep 01, 2020 12:32 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
- Replies: 124
- Views: 171746
Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
Hi, Let me try to explain the problem: K19 switches the RX to ground while transmitting. So the ANAN-10 is able to run "Pure Signal" without modifications but there are major downsides: 1) Feedback level must be tremendous 2) Dangerous - if K19 shows contact problems your feedback level mi...
- Sat Mar 28, 2020 5:10 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
- Replies: 124
- Views: 171746
Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
Hi Rick,
Tested Pre21 very quick - sample rate 192K...….no Pure Signal any longer.
Did 20 tests not even one tx with PS.....sorry, went back to Pre20.
But "thanks" for developing this further Rick!
73,
Andy
Tested Pre21 very quick - sample rate 192K...….no Pure Signal any longer.
Did 20 tests not even one tx with PS.....sorry, went back to Pre20.
But "thanks" for developing this further Rick!
73,
Andy
- Sat Mar 28, 2020 2:21 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
- Replies: 124
- Views: 171746
Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
Hi Walter, Just a quick feedback - using an ANAN-10 here, but of course same Hermes H/W as your 100 (non D-version). My ANAN is down to 600 mA....so total power consumption is just 7,2 W @ 12V. And I am using an external pre-selector as well which is included here. You find pictures here: http://ww...
- Fri Mar 27, 2020 1:23 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
- Replies: 124
- Views: 171746
Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
Hi Rick,
Even after some more hours testing - all stable and all fine.
Think you won it - "The Star for your hard work"
Once again many thanks!
73,
Andy
Even after some more hours testing - all stable and all fine.
Think you won it - "The Star for your hard work"
Once again many thanks!
73,
Andy
- Thu Mar 26, 2020 8:17 am
- Forum: Protocol 2 Firmware (all radios)
- Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
- Replies: 124
- Views: 171746
Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
Hi Rick and all others here in our team Pre 19: - Tested that last night - results are similar to those of Daniel. No cleanup with PS or PS-A. Unfortunately not usable…. Pre 20: Congratulations Rick! I know I do only speak for myself - others may observe different things. Pre-20 is by far the best ...
- Tue Mar 24, 2020 11:08 am
- Forum: Protocol 2 Firmware (all radios)
- Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
- Replies: 124
- Views: 171746
Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
Hi everybody, thanks Rick for the next version! Just tested Pre18 - here is what I noticed: (Interesting that Daniel reported way different results - we are using both original Hermes boards from India - the only difference is mine is a complete ANAN-10) - No noise floor any more - PS-A worked all ...
- Mon Mar 23, 2020 12:01 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
- Replies: 124
- Views: 171746
Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
Hi Rick, hi Jorge and all others, Rick, thank you very much for this tremendous progress. This version is quite different from others. @Jorge , is it true that PS switches off when warmed up? It is exactly the other way round here - Arno, DL5AI confirmed that as well…. Let me summarize my observati...
- Thu Mar 19, 2020 10:13 am
- Forum: Protocol 2 Firmware (all radios)
- Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
- Replies: 124
- Views: 171746
Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
Thanks Rick, You are not bothering anybody by sending out different trials…..think all of us are more than happy to assist where we can. Just an idea Rick (may be totally wrong): Since the detection of the important "Get Pk" falls down to precisely half the value, is it possible that ther...
- Wed Mar 18, 2020 10:40 am
- Forum: Protocol 2 Firmware (all radios)
- Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
- Replies: 124
- Views: 171746
Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
Hi Rick, As reported by Jorge and Jeff before - no big change. Arno confirmed the same via WhatsApp. PS still jumps off frequently. I just tried to measure how often that is the case…...nearly every 2nd to 3rd trial PS was down. What happens at your end if you just start transmitting 20 times for j...
- Tue Mar 17, 2020 8:27 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
- Replies: 124
- Views: 171746
Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
Thanks Rick.......I will test it first thing tomorrow morning and will report my results..... Timing doesn't matter....I tried everything but will certainly do it again. Also changed them on my 7000 - no changes at all. The 7000 always works (PS-A) as far as I could test it. Typical delay values are...
- Mon Mar 16, 2020 8:01 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
- Replies: 124
- Views: 171746
Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
Understood Mark..... Well, I have never had that on my 7000 but the percentage of modulation is a factor on the ANAN-10 / Hermes. I went back in my lab and did some analyzis. Even when modulating with a generator at full audio power right from the beginning PS-A fails frequently. As Arno stated befo...
- Mon Mar 16, 2020 4:47 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
- Replies: 124
- Views: 171746
Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
Hi Mark and all others, Your comments are very much appreciated. May be I miss understood your note - you mentioned you use an ANAN 7000 DLE?.... different story…. This topic is related to the ANAN-10 / Hermes F/W only…...so my 7000 (I own one as well) runs next to perfect. But I agree on the point ...
- Sun Mar 15, 2020 12:26 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
- Replies: 124
- Views: 171746
Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
Hi all, Just a quick one: I played around again with version Pre13 and changed all the timing values in the Linearization menu. I could not find any setting which improves things. Looks like all the same - like when using my ANAN-7000. The only difference the 7000 works stable - the ANAN-10 not ….. ...
- Sat Mar 14, 2020 12:22 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
- Replies: 124
- Views: 171746
Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
Hi Rick and team, Tried both versions Pre13 - no significant changes…..sri to say. What came in my mind - and this can be damp stupid: "Open HPSDR mx" runs perfectly regarding PS-A on Hermes, ANAN-10 and Co..... The routine for PS may be very different but may be not the way it is monitor...
- Fri Mar 13, 2020 8:26 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
- Replies: 124
- Views: 171746
Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
Hi Rick, As far as I know no Thetis version works on Hermes boards...the only work-around is "Single Calibration" instead of Pure Signal in auto-mode (PS-A).......very annoying. My hope was that there might be an easy fix just ensuring that the feedback signal will be monitored and calcula...
- Fri Mar 13, 2020 12:37 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
- Replies: 124
- Views: 171746
Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
Hi Rick - hi all together, Find another 3,5 minutes movie - nothing has really changed (unfortunately): https://www.dropbox.com/s/cl3mzkp38wasdr1/ANAN%2010%20problem_pre12_DL6EAT.mp4?dl=0 Many thanks for all your work - don't hesitate to send me any new version or trials for testing - I'm more than...
- Fri Mar 13, 2020 6:08 am
- Forum: Protocol 2 Firmware (all radios)
- Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
- Replies: 124
- Views: 171746
Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
Hi Rick and all, Many thanks for digging into this. Well, if your ANAN 10 is modified in regards of K19 there is physically no difference to our setup, or? Feedback is feedback no matter where it comes from - the level should be good but the rest should be pretty similar. Sorry about my long lesson...
- Thu Mar 12, 2020 8:04 am
- Forum: Protocol 2 Firmware (all radios)
- Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
- Replies: 124
- Views: 171746
Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
Good morning Rick and all others, Well, I'm using 192K as well - and get the failure very frequently - a demonstration could be done right away and would take me under 1 minute. This failure is not happening from time to time - it is present all the time. Since the ANAN-10 is only capable to produc...
- Wed Mar 11, 2020 11:06 am
- Forum: Protocol 2 Firmware (all radios)
- Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
- Replies: 124
- Views: 171746
Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
Hi Rick, Thanks to our time difference I already captured a little movie - it's 3 minutes long. If you find some minutes please watch it: https://www.dropbox.com/s/hn8ovs34nmxsy2y/ANAN%2010%20problem_DL6EAT.mp4?dl=0 (Movie removed - see updated version a bit further down) Please note all numbers in...
- Wed Mar 11, 2020 6:14 am
- Forum: Protocol 2 Firmware (all radios)
- Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
- Replies: 124
- Views: 171746
Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
Hi Rick & all others, Many thanks for digging into this so hard and especially for not giving up! Unfortunately no fix here as well - jumps in and out. I wrote it before, but it's interesting to see that in all cases when PS-A stops the "GetPk" value stops reading - and a second later...
- Tue Mar 10, 2020 12:11 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
- Replies: 124
- Views: 171746
Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
Hi all - hi Scott, Realized a bit too late that there are more versions to test. So I went back for another hour testing in my lab. In direct comparison I would choose pre 9 (tested pre4 - pre9)….. Pre 9 is may be slightly more stable - the cleaning process is better (and way better than pre4). Wors...
- Tue Mar 10, 2020 9:14 am
- Forum: Protocol 2 Firmware (all radios)
- Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
- Replies: 124
- Views: 171746
Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
Hi all, Just tested "pre 6" on my ANAN 10 (16 bit version): Pure signal wasn't really much better here - but "get signal" and "set signal" showed the correct level now at least half of the time. I observed a total loss of signal recognition several times - so "corr...
Re: 2.7.0
Hi Richie,
Spent 2 hours on testing my ANAN 7000 DLE (blue version) and Thetis v270 a2 - also around 10 minutes on my ANAN10 (Hermes Board) - same Thetis version.
All worked fine and stable…..thanks for all your effort and welcome back!
73,
Andy
Spent 2 hours on testing my ANAN 7000 DLE (blue version) and Thetis v270 a2 - also around 10 minutes on my ANAN10 (Hermes Board) - same Thetis version.
All worked fine and stable…..thanks for all your effort and welcome back!
73,
Andy
- Thu Feb 13, 2020 1:35 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
- Replies: 124
- Views: 171746
Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
Quick feedback after an 1 hour test of firmware 10.8 pre 5: Pure Signal is way more stabil - comes even back after auto disabling. In about 70% of all tx periods it worked good and stayed alive - sometimes it switches off.....still a bit instabil. This version (10.8 pre 5) does actually display the...
- Wed Feb 12, 2020 6:09 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
- Replies: 124
- Views: 171746
Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
Sri - need to add I tested 10.8 pre4 (will do pre 5 tomorrow)
Tnx, Andy
Tnx, Andy
- Wed Feb 12, 2020 5:26 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
- Replies: 124
- Views: 171746
Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
Hi everybody, Just flashed my ANAN 10 (16-bit version) to "10.8 pre" and tested under Thetis v2.6.9_c3. In my case Pure Signal did not much improve (if any) in "Auto Mode". Unfortunately it's practically still unusable except I'm using "Single Cal" (as done before) Any...