Search found 33 matches

by spinomaly
Sat Mar 24, 2018 4:36 am
Forum: PowerSDR mRX
Topic: PowerSDR mRX PS v3.4.9 Released
Replies: 3
Views: 4968

Re: PowerSDR mRX PS v3.4.9 Released

Hi Albert,

Can you post a graphic of what you see as well as your exported database? I have not been able to duplicate the issue.
by spinomaly
Wed Dec 20, 2017 3:35 am
Forum: PureSignal Operations (PowerSDR & Thetis)
Topic: Pure Signal Issue
Replies: 26
Views: 22658

Re: Pure Signal Issue

Thank you for the explanation. What are the two data streams coming back? IQ data?
by spinomaly
Wed Dec 20, 2017 12:18 am
Forum: PureSignal Operations (PowerSDR & Thetis)
Topic: Pure Signal Issue
Replies: 26
Views: 22658

Re: Pure Signal Issue

I will try version 1.9 as well.
by spinomaly
Wed Dec 20, 2017 12:17 am
Forum: PureSignal Operations (PowerSDR & Thetis)
Topic: Pure Signal Issue
Replies: 26
Views: 22658

Re: Pure Signal Issue

Hi Scott, I found out the cause of the issue although I do not understand the mechanism. I had the sample rate in the Primary Audio tab set to 38,400. Setting it to 19,200 appears to solve the issue. I wonder if it is a display issue since the amp view looked reasonable. Also, should this be used in...
by spinomaly
Tue Dec 19, 2017 9:39 pm
Forum: PureSignal Operations (PowerSDR & Thetis)
Topic: Pure Signal Issue
Replies: 26
Views: 22658

Re: Pure Signal Issue

I also tried 3.4.6 from my developers branch and it also shows the issue.
by spinomaly
Tue Dec 19, 2017 9:34 pm
Forum: PureSignal Operations (PowerSDR & Thetis)
Topic: Pure Signal Issue
Replies: 26
Views: 22658

Re: Pure Signal Issue

Loading FW 2.0 or 2.2 did not solve the problem. It doesn't appear it is a coupler issue because it would have shown bad spectral content when PS was disabled. It also doesn't appear to be a final driver issue for the same reason.

Is anyone else using PS with the 7000?
by spinomaly
Tue Dec 19, 2017 7:04 pm
Forum: PureSignal Operations (PowerSDR & Thetis)
Topic: Pure Signal Issue
Replies: 26
Views: 22658

Re: Pure Signal Issue

I'm pretty sure the rolling is some type of external signal. It is prominent in the mornings. I will try loading FW tonight.
by spinomaly
Tue Dec 19, 2017 6:36 pm
Forum: PureSignal Operations (PowerSDR & Thetis)
Topic: Pure Signal Issue
Replies: 26
Views: 22658

Re: Pure Signal Issue

I am noticing something strange on receive. Looking at CW signals you will see that there are additional side tones when PS is enabled whereas they do not exist when PS is disabled.
by spinomaly
Tue Dec 19, 2017 6:29 pm
Forum: PureSignal Operations (PowerSDR & Thetis)
Topic: Pure Signal Issue
Replies: 26
Views: 22658

Re: Pure Signal Issue

Hi Scott,

Thanks for the info on DIGI. Disabling DUP appears to show a good response. I will try updating the FW in the 7000.
by spinomaly
Tue Dec 19, 2017 3:37 pm
Forum: PureSignal Operations (PowerSDR & Thetis)
Topic: Pure Signal Issue
Replies: 26
Views: 22658

Re: Pure Signal Issue

Thanks Gary,

The FT-8 profile is a modified one of a SSB profile I have been using. Only real difference is the equalizer is disabled.

Disabling all noise reduction did not appear to help.
by spinomaly
Tue Dec 19, 2017 3:20 pm
Forum: PureSignal Operations (PowerSDR & Thetis)
Topic: Pure Signal Issue
Replies: 26
Views: 22658

Re: Pure Signal Issue

PSDR version 3.4.5. Not sure about the FW in the 7000. In setup there is a reference to 2.1.
by spinomaly
Tue Dec 19, 2017 4:19 am
Forum: PureSignal Operations (PowerSDR & Thetis)
Topic: Pure Signal Issue
Replies: 26
Views: 22658

Re: Pure Signal Issue

More figures.
by spinomaly
Tue Dec 19, 2017 4:19 am
Forum: PureSignal Operations (PowerSDR & Thetis)
Topic: Pure Signal Issue
Replies: 26
Views: 22658

Pure Signal Issue

I have a 7000DLE running PSDR 3.4.5 and am having issues running PS. If PS is disabled then the transmitted two-tones look reasonable. If I uncheck the PS disable but don't enable PS-A I get very an output that does not look right. The output is independent of drive level. I can bring it all the way...
by spinomaly
Sun Dec 10, 2017 5:12 pm
Forum: PowerSDR mRX
Topic: Quick record on AM
Replies: 22
Views: 18438

Re: Quick record on AM

Update. If I change to IQ in the Wave Record Options dialog it appears to work. I will take a look at the code to see what is going on.
by spinomaly
Sun Dec 10, 2017 4:11 pm
Forum: PowerSDR mRX
Topic: Quick record on AM
Replies: 22
Views: 18438

Re: Quick record on AM

I am having the exact same issue but it is also affecting the Wave panel.
by spinomaly
Sun Dec 10, 2017 5:22 am
Forum: PowerSDR mRX
Topic: Audio Playback Issue
Replies: 2
Views: 4850

Audio Playback Issue

Running PSDR 3.4.5 and 7000. If I try to play back a recording using the built-in player it plays back badly. If I play the .wav file using another player in Windows it plays back fine. Anyone else having this issue?
by spinomaly
Sat Dec 09, 2017 4:52 pm
Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
Topic: 7000DLE Variable Output Power
Replies: 2
Views: 3700

7000DLE Variable Output Power

Has anyone noticed that the output power (read in PowerSDR) seems to change as a function of temperature? I power calibrated after a warm-up period and have been noticing that the output power is up 5-7 Watts until the unit reaches a stable temperature point which could take 5-10 minutes of transmit...
by spinomaly
Sat Dec 02, 2017 3:34 am
Forum: PowerSDR mRX
Topic: Quick record on AM
Replies: 22
Views: 18438

Re: Quick record on AM

Hi Scott,

Checking my settings shows I am inline with your document. I also get good audio reports. I am still not able to get a recording of my voice. It plays back distorted.
recording3.png
recording3.png (163.05 KiB) Viewed 18309 times
by spinomaly
Sat Dec 02, 2017 2:30 am
Forum: PowerSDR mRX
Topic: Quick record on AM
Replies: 22
Views: 18438

Re: Quick record on AM

Thank Scott. This is very helpful. I am not all that familiar with the details of audio in windows so this is great.
by spinomaly
Sat Dec 02, 2017 2:29 am
Forum: PowerSDR mRX
Topic: Panadapter Frequency Span
Replies: 4
Views: 4878

Re: Panadapter Frequency Span

Thanks Scott. I am familiar with what you describe below but it took me a little time to determine this was in the audio section.
by spinomaly
Sat Dec 02, 2017 1:32 am
Forum: PowerSDR mRX
Topic: Panadapter Frequency Span
Replies: 4
Views: 4878

Re: Panadapter Frequency Span

Well not sure if I should delete the post or not. Decided to keep it in case someone else needs the answer. For the span issue I had adjusted the Audio->Primary Sample Rate to a lower value when I was playing around with the audio. This causes the span to be reduced. Increasing it to max solved that...
by spinomaly
Sat Dec 02, 2017 1:03 am
Forum: PowerSDR mRX
Topic: Quick record on AM
Replies: 22
Views: 18438

Re: Quick record on AM

I have the same issue with 3.4.5 and the 7000. I tried recording my voice on SSB and it plays back completely distorted.

Using Jabra headset into VAC1 and VAC2(off). CFC disabled.

recording.png
recording.png (312.84 KiB) Viewed 18321 times

recording2.png
recording2.png (407.57 KiB) Viewed 18321 times
by spinomaly
Sat Dec 02, 2017 12:45 am
Forum: PowerSDR mRX
Topic: Panadapter Frequency Span
Replies: 4
Views: 4878

Re: Panadapter Frequency Span

(edited) For some reason I could not tune above 7.195 MHz for some reason with all the various tune methods. Closing the app did not fix it. I ended up looking around at the various dialogs, collapsed the display and expanded it and it then let me tune above. However, it seems like the total span of...
by spinomaly
Sat Dec 02, 2017 12:31 am
Forum: PowerSDR mRX
Topic: Panadapter Frequency Span
Replies: 4
Views: 4878

Panadapter Frequency Span

Besides the zoom slider and buttons is there a way to modify the span in panadapter. For example, can I view the entire 7M band? I cannot seem to find a way to do this.
by spinomaly
Fri Dec 01, 2017 11:44 pm
Forum: PowerSDR mRX
Topic: PowerSDR mRX PS 3.4.6 Released
Replies: 33
Views: 26367

Re: PowerSDR mRX PS 3.4.6 Released

Now that I have a 7000 I am happy to help with development. Let me know how I can help. I have 3.4.2 compiling and can move to another branch as needed.
by spinomaly
Wed Nov 29, 2017 4:53 am
Forum: Apache Labs News
Topic: ANAN-7000DLE Update
Replies: 37
Views: 59658

Re: ANAN-7000DLE Update

Received mine this morning direct from Apache. SDR is completely new to me. Had some issues connecting which turned out to be the bootloader switch on the bottom that had been moved. W5WC quickly helped and I was connected.
by spinomaly
Tue Nov 07, 2017 1:31 am
Forum: PowerSDR mRX
Topic: GUI Optimized for 4K
Replies: 5
Views: 6190

Re: GUI Optimized for 4K

I was able to solve the issues I was having with blurry text. The default scaling in Win 10 is 300%. I found that 175% is a good compromise. Not sure if others have seen this as well.
by spinomaly
Mon Nov 06, 2017 2:35 am
Forum: PowerSDR mRX
Topic: GUI Optimized for 4K
Replies: 5
Views: 6190

Re: GUI Optimized for 4K

Thanks Scott. I have loaded the source and have it compiling in VS. Making my way around the code.
by spinomaly
Sun Nov 05, 2017 11:49 pm
Forum: PowerSDR mRX
Topic: GUI Optimized for 4K
Replies: 5
Views: 6190

GUI Optimized for 4K

I have a Sony XBR 4K "monitor" and noticed that some of the UI components are not scaling well and seem to not have enough resolution. For example, the text on the buttons. Is this to be expected? I did some searching in this forum as well as the Yahoo forum but did not find anything. If I...
by spinomaly
Sun Nov 05, 2017 12:01 am
Forum: PC's & Homebrew Hardware
Topic: Recommended PC "Sticky"?
Replies: 6
Views: 7997

Re: Recommended PC "Sticky"?

I will try that. Thank you!

Go to advanced search