Search found 17 matches

by qst
Tue Nov 12, 2019 5:47 am
Forum: Digital Mode, Rig Control & Logging Software
Topic: Anan 7000 DLE MKII & WSTJ-X
Replies: 12
Views: 798

Re: Anan 7000 DLE MKII & WSTJ-X

Hi, I solved the problem. I had to change Driver WDM-KS to MME and everything started to work properly. I don't know why WDM-KS doesn't work. Various configurations are shown on Youtube. Only MME works for me and I will leave it that way.
Greetings to all.
Slawomir
by qst
Mon Nov 11, 2019 6:58 pm
Forum: Digital Mode, Rig Control & Logging Software
Topic: Anan 7000 DLE MKII & WSTJ-X
Replies: 12
Views: 798

Re: Anan 7000 DLE MKII & WSTJ-X

Hi, after VAC configuration I turned on WSJT-X. The Wide Graph shows working stations, the reception level in the Ban Acitivity window is about 70% and there are no working stations. I have enabled CQ and correspondence can see my sign. A few people called me but I didn't see them in the window. I d...
by qst
Mon Nov 11, 2019 3:39 pm
Forum: Digital Mode, Rig Control & Logging Software
Topic: Anan 7000 DLE MKII & WSTJ-X
Replies: 12
Views: 798

Re: Anan 7000 DLE MKII & WSTJ-X

Hi Scott,problem solved. By default, the new version of VAC Capture port and Render port is turned on "auto" I changed to Wave PCi and now everything works ok. In the Window WDM-KS driver in the input and output tab virtual cables are visible. Everything works ok. Thank you for the advice....
by qst
Mon Nov 11, 2019 9:41 am
Forum: Digital Mode, Rig Control & Logging Software
Topic: Anan 7000 DLE MKII & WSTJ-X
Replies: 12
Views: 798

Re: Anan 7000 DLE MKII & WSTJ-X

Hi Scott, thank you for your answer. I have partially solved the problem. Audio drivers after the WIn 10 update did not work properly. I can already see 4 virtual cables in the HPSDR setup. But only you can see them when the MME driver is enabled. When I turn on the Windows WDM-KS driver, there is n...
by qst
Sat Nov 09, 2019 10:57 am
Forum: Digital Mode, Rig Control & Logging Software
Topic: Anan 7000 DLE MKII & WSTJ-X
Replies: 12
Views: 798

Re: Anan 7000 DLE MKII & WSTJ-X

Hi,I installed 4 Virtual Audio Cable-Muzychenko. In the Power SDR - audio-VAC setup I choose the MME driver. The input is only Line 3 and line 4 (VAC). The output is VAC 1, VAC 3 and VAC 4 (VAC). This is probably not correct. Which ports should I choose in input and ouput VAC1 audio setup in HPSDR? ...
by qst
Fri Nov 08, 2019 7:08 pm
Forum: Digital Mode, Rig Control & Logging Software
Topic: Anan 7000 DLE MKII & WSTJ-X
Replies: 12
Views: 798

Anan 7000 DLE MKII & WSTJ-X

Hi to all,
I have a problem with my Anan configuration with WSTJ-X program. Please help.
Slawomir
by qst
Sun Nov 03, 2019 7:34 am
Forum: PowerSDR mRX
Topic: OpenHPSDR problem
Replies: 0
Views: 278

OpenHPSDR problem

Hi all I have Anan 7000 DLE MKII for several days. I installed the latest version of PowerSDR 3.4.9. It installed for a long time. When I start PowerSDR, the ruler develops a little slowly and jumps occur. The radio works fine. But if I turn on the RX2 then the screen flashes and the rx2 turns on af...
by qst
Sat Nov 02, 2019 4:32 pm
Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
Topic: RX2 - no reception - Anan 7000 DLE MKII
Replies: 1
Views: 216

RX2 - no reception - Anan 7000 DLE MKII

Hi to all,
in my 7000 DLE RX2 not receiving station. By default, RX2 works on ADC2. How do I switch to ADC 1 is all ok. Does the second antenna have to be connected to the second RX on ADC2?
Slavomir
by qst
Sun Oct 20, 2019 1:12 pm
Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
Topic: Anan 7000DLE Mk-II PA output.
Replies: 10
Views: 2619

Re: Anan 7000DLE Mk-II PA output.

Hi to All,
my Anan 7000 DLE MKII stays with me for 5 days. Yesterday I turned on the first time TX. The output power at 80m is max 64 W. At 28 Mhz only 52W. I don't know what the reason is. Do you have any suggestions on what to do about it? Does the radio need to be sent back to the service?
Slawomir
by qst
Sun Oct 20, 2019 1:00 pm
Forum: MIDI Controllers
Topic: Elad TMATE2 USB Tuning system
Replies: 23
Views: 5849

Re: Elad TMATE2 USB Tuning system

Hi Sigi, thank you very much for the story. Just yesterday I launched TM-2. Everything works fine. I have already met Anan 7000 DLE MKII. Low output power is my problem. Maximum is 64 W for dummy load on all bands. I don't know if it's a matter of software or regulation inside the radio. Maybe someo...
by qst
Sat Oct 19, 2019 6:00 am
Forum: MIDI Controllers
Topic: Elad TMATE2 USB Tuning system
Replies: 23
Views: 5849

Re: Elad TMATE2 USB Tuning system

Hi All I have had Anan 7000 DLE MKII and Elad TM-2 for 3 days. I connected TM-2 to the computer USB port and the green "USB" LED on TM-2 is off. Does Anan have to be connected via USB to a computer? I have a virtual serial port splitter. Is there a configuration program for TM-2? Please he...
by qst
Sun Aug 13, 2017 6:14 pm
Forum: PowerSDR mRX
Topic: Angelia SDR and PA rx/tx relay
Replies: 4
Views: 1847

Re: Angelia SDR and PA rx/tx relay

Hi Scott,
I understand you perfectly. But probably among many of the Hermes SDR users are those who use factory-built external PA ?
Slawomir
by qst
Sun Aug 13, 2017 2:35 pm
Forum: PowerSDR mRX
Topic: Angelia SDR and PA rx/tx relay
Replies: 4
Views: 1847

Re: Angelia SDR and PA rx/tx relay

Hi Scott,
Thank you for your answer. Do you know the ready-made factory that will work with my amplifier? I think the switch must be built at the end of the chain and move the full power that the amplifier gives to the antenna. The power output of my PA limits the available solutions.
Slawomir
by qst
Sat Aug 12, 2017 7:03 pm
Forum: PowerSDR mRX
Topic: Angelia SDR and PA rx/tx relay
Replies: 4
Views: 1847

Angelia SDR and PA rx/tx relay

?Hello all, My Angelia is already working with a hilberling amplifier. But i have problem connecting rx signal to SDR. Herme / Angelia have no tx / rx relay on board. How to make a connection from an external amplifier to the rx socket in the SDR to bring the signal? Do I need to perform an external...
by qst
Sat Aug 05, 2017 8:35 am
Forum: PowerSDR mRX
Topic: ANAN 100D/Angelia board PSDR config for CommCat
Replies: 2
Views: 1214

ANAN 100D/Angelia board PSDR config for CommCat

Hello all,
please help how to configure PowerSDR to work with CommCat to log in. I have a physical 4 ports rs232, I added 2 pairs of virtual ports in VPSD
The SDR is not visible in CommCat despite various attempts at port settings in PSDR and CommCat.
Greetings from Wroclaw.
Slawomir SP6DLO
by qst
Sat Jul 29, 2017 4:36 pm
Forum: Amplifiers & Tuners
Topic: SDR Angelia and PA Hilberling HPA-8000B
Replies: 3
Views: 2585

Re: SDR Angelia and PA Hilberling HPA-8000B

Slawomir, I do not have an HPA-8000B. Indeed, I doubt anyone has a Hilberling amplifier except you! They look amazing. And amazingly expensive! However, a quick look in the HPA-8000B and Apache manuals shows everything needed to understand how to connect to this amplifier... PTT wiring: Angelia J16...
by qst
Sat Jul 29, 2017 6:34 am
Forum: Amplifiers & Tuners
Topic: SDR Angelia and PA Hilberling HPA-8000B
Replies: 3
Views: 2585

SDR Angelia and PA Hilberling HPA-8000B

I have SDR Angelia + BPF -out 500mW. How to connect my SDR to Hilbeling HPA-8000B? PA needs a cable connection with CAT. Will without CAT will switch the bandwidth, ptt?
Slawomir
DSC01470 copy.jpg
DSC01470 copy.jpg (228.42 KiB) Viewed 2580 times

Go to advanced search