Search found 27 matches

by therealboss
Sat Sep 05, 2020 8:35 am
Forum: Thetis
Topic: Can't start Thetis
Replies: 2
Views: 2184

Re: Can't start Thetis

I have it sorted but had to do a FULL uninstall and reinstall.
by therealboss
Mon Aug 31, 2020 11:05 pm
Forum: Thetis
Topic: Can't start Thetis
Replies: 2
Views: 2184

Can't start Thetis

All has been working 100% but started PC this morning and get the following error when I try to start Thetis.
by therealboss
Wed Jul 08, 2020 11:56 am
Forum: piHPSDR
Topic: piHPSDR fresh install
Replies: 0
Views: 3251

piHPSDR fresh install

I have done a fresh install in my piHPSDR and the radio (Anan7000DLE) is working but none of the buttons or knobs are working. I guess I need to install something else to get them working, what am I missing.
by therealboss
Wed Dec 12, 2018 4:13 pm
Forum: Orion Mk II & III Firmware (all 7000, 8000 & Andromeda Variants)
Topic: Anan 7000 Firmware
Replies: 2
Views: 7571

Re: Anan 7000 Firmware

Thank you, installed it and its all working.


Thanks again.
by therealboss
Tue Dec 11, 2018 4:24 pm
Forum: Orion Mk II & III Firmware (all 7000, 8000 & Andromeda Variants)
Topic: Anan 7000 Firmware
Replies: 2
Views: 7571

Anan 7000 Firmware

What is the best firmware for Protocol 1 and also Protocol 2

It's my understanding there are issues running Protocol 2 on the 7000 at the moment but I would like some clarification on the matter.
by therealboss
Sat Nov 24, 2018 10:09 am
Forum: piHPSDR
Topic: Static IP
Replies: 1
Views: 5423

Static IP

How do I set a static IP on my piHPSDR? My setup is an Anan 7000 with a static IP and currently attached to my PC with a CAT5 cable and the PC has a static IP and all works well but I would like to put a static IP on the piHPSDR to operate the radio via my LAN. I did try to poke about with /etc/dhcp...
by therealboss
Thu Nov 15, 2018 3:56 pm
Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
Topic: Anan 7000 or Anan 8000
Replies: 2
Views: 3664

Re: Anan 7000 or Anan 8000

Cheers Scott

Your post answered most of my questions, thank you.

73
by therealboss
Wed Nov 14, 2018 7:47 pm
Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
Topic: Anan 7000 or Anan 8000
Replies: 2
Views: 3664

Anan 7000 or Anan 8000

Not sure where to post this, maybe a good time to start a new section for general questions. I'm thinking about upgrading from my Anan 200D to either a 7000 or 8000 but trying to work out the difference, from what I can tell the only real difference is 100W or 200W or am I missing something that's r...
by therealboss
Sat Nov 03, 2018 5:12 pm
Forum: Network Connections & Network Hardware
Topic: Ethernet loss
Replies: 5
Views: 9196

Re: Ethernet loss

Issue resolved, everything works fine if I DO NOT ping the radio when I want to use it, very strange.
by therealboss
Sat Nov 03, 2018 5:10 pm
Forum: Network Connections & Network Hardware
Topic: Issue when pinging radio
Replies: 0
Views: 5272

Issue when pinging radio

I have an Anan200D and tried to upgrade the firmware from 4.8 to 5.2 but had load of problems but thats another story. Reason for this post, if I ping the radio continually I can’t use the radio as I get packet loss and the radio locks up from time to time. I just thought I would post this incase so...
by therealboss
Fri Nov 02, 2018 1:06 am
Forum: Network Connections & Network Hardware
Topic: Ethernet loss
Replies: 5
Views: 9196

Re: Ethernet loss

Network cable changed but old cable checks out 100% OK with a cable tester. I'm running a constant ping to the radio and sometimes it drops 1 ping and that's not an issue but when it drops several pings PowerSDR hangs, if the pings come back PowerSDR will start running again but if pings stop the co...
by therealboss
Thu Nov 01, 2018 8:52 pm
Forum: Network Connections & Network Hardware
Topic: Ethernet loss
Replies: 5
Views: 9196

Ethernet loss

A bit of a strange one, but there again I think any issue is strange until you have one. Everything was working fine, Protocol 1 and PowerSDR mRX PS v3.4.9 So why play about with it you may ask, well I wanted to try Protocol 2 again as there is a later version of before. I installed P2 firmware but ...
by therealboss
Mon Sep 03, 2018 7:41 am
Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
Topic: Foot Switch Install
Replies: 5
Views: 5926

Re: Foot Switch Install

All sorted now with all your help, and yes I had an issue with the DB25 plug not going all the way home because of the fixing nuts, all sorted now. One thing I noticed is if I TX with the space bar I get a few more watts out the radio so I had to adjust the TX profile to compensate when using the fo...
by therealboss
Sun Sep 02, 2018 5:06 pm
Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
Topic: Foot Switch Install
Replies: 5
Views: 5926

Re: Foot Switch Install

Have it wired that way but switch not operating TX on Anan200D, is there a setting I need in PowerSDR?
by therealboss
Sun Sep 02, 2018 10:33 am
Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
Topic: Foot Switch Install
Replies: 5
Views: 5926

Foot Switch Install

I want to install my foot switch via the DB25, can someone confirm 100 the pins to attach it to on the DB25 plug and also what setting if any I need to change in PowerSDR to operate the radio via the foot switch. Radio is an Anan200D Foot switch is home brew with 2 wires, just on or off. Thank you
by therealboss
Sun Jan 28, 2018 11:58 am
Forum: Thetis
Topic: When is the next update due?
Replies: 1
Views: 3508

When is the next update due?

I see the last update was July 2016, when will we see a new update for Thetis?

I have been running 2.5.3 since it came out but thought that as this is beta, I thought updates would be more frequent than we are seeing.
by therealboss
Sun Nov 19, 2017 9:30 am
Forum: Digital Mode, Rig Control & Logging Software
Topic: Easypal
Replies: 4
Views: 6127

Re: Easypal

Thanks for the reply guys, I have worked it out and now have it working.
by therealboss
Thu Nov 16, 2017 3:48 pm
Forum: Digital Mode, Rig Control & Logging Software
Topic: Easypal
Replies: 4
Views: 6127

Easypal

Has anyone here setup Easypal to work with their Anan?

I have an Anan200D and use it on FT8 and other modes along with HRD without any issue but can't get Easypal running, can someone share their settings.




Thanks



EI7HDB
by therealboss
Thu Jul 20, 2017 12:24 pm
Forum: SDR Console
Topic: SDR Console V3 on a 200D
Replies: 4
Views: 11653

Re: SDR Console V3 on a 200D

OK, cool, I'll stick with it then as I like it so far.



73


Dale
by therealboss
Wed Jul 19, 2017 8:51 pm
Forum: SDR Console
Topic: SDR Console V3 on a 200D
Replies: 4
Views: 11653

Re: SDR Console V3 on a 200D

I too have a 200D, I installed the software and love the look of it, only used it for RX at the moment but plan to test it on TX at he week end. Is this software still a work in progress or is it at the end of the line, reason I ask is that I don't want to spend hours fine tuning it to suit my stati...
by therealboss
Mon Jul 17, 2017 11:29 pm
Forum: Thetis
Topic: Switching between Digi modes & SSB
Replies: 0
Views: 2999

Switching between Digi modes & SSB

Think I have found a bug in 2.5.3, When I fire up the radio (Anan200D) and work SSB, I'm getting good reports and I'm very happy with it. If I then change over to start working some JT65, the VAC is not working and I have to close down Thetis and start it again and then the VAC works grand. When I g...
by therealboss
Mon Jul 17, 2017 11:19 pm
Forum: Thetis
Topic: Thetis v.2.5.3 (Beta)
Replies: 10
Views: 12453

Re: Thetis v.2.5.3 (Beta)

Rob W1AEX


It's fine, just thought I might be missing out on something hi hi.



:)
by therealboss
Sun Jul 16, 2017 6:10 pm
Forum: Thetis
Topic: Thetis v.2.5.3 (Beta)
Replies: 10
Views: 12453

Re: Thetis v.3.5.3 (Beta)

I''m running 2.5.3 on my 200D without any issues on both SSB & Digital Modes.
by therealboss
Sun Jul 16, 2017 4:08 pm
Forum: Thetis
Topic: Thetis v.2.5.3 (Beta)
Replies: 10
Views: 12453

Re: Thetis v.3.5.3 (Beta)

I'm running 2.5.3, where did you download 3.5.3?
by therealboss
Sat Jul 08, 2017 7:59 pm
Forum: Thetis
Topic: Thetis - Release notes
Replies: 13
Views: 12306

Thetis - Release notes

I see 2.5.2 is out, I have installed it, but would like to see the release notes for it, so I can see what has been fixed or added.

I have looked everywhere but can't track down the release notes.


Any suggestions?
by therealboss
Fri Jul 07, 2017 10:41 am
Forum: Orion Firmware (200D)
Topic: New Protocol 1 (current protocol) firmware Orion_v4.9 available for Orion/ANAn-200D
Replies: 6
Views: 13735

Re: New Protocol 1 (current protocol) firmware Orion_v4.9 available for Orion/ANAn-200D

I installed v4.9 on my 200D Orion board and everything runs smoothly, Thinking of dabbling with playing Protocol 2 again but don't really see any advantage as v4.9 is working well and offers more features than if I run Protocol 2 and Thetis. I guess Protocol 2 will take over in the near future but o...
by therealboss
Fri Jul 07, 2017 8:02 am
Forum: PC's & Homebrew Hardware
Topic: Videocard???
Replies: 9
Views: 15269

Re: Videocard???

I have a Radeon RX470, I don't think PowerSDR pushes the Graphics card at all, I think memory and CPU are more important, also a good fast HDD.

My PC is for my radio only, running PowerSDR, HRD & JT65-HF

My system is a i7-6800K CPU @ 3.80GHz
64GB Fast Ram
Samsung 850 Evo SSD

Go to advanced search